MikroTik RBwAPG-5HacD2HnD Wireless Routers User Manual

: June 13, 2024
: Mikrotik

Table of Contents

First steps:
Safety Information:
Technical Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MikroTik RBwAPG-5HacD2HnD Wireless Routers User Manual

This device needs to be upgraded to RouterOS v7.3 or the latest version to ensure compliance with local authority regulations! It is the end users’ responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed. This “wAP ac” series Quick Guide covers models: RBwAPG-5HacD2HnD (wAP ac), RBwAPG5HacD2HnD-BE (wAP ac BE).

https://mt.lv/um

This is Wireless Network Device. You can find the product model name on the case label (ID). Please visit the user manual page on https://mt.lv/um for the full up-to-date user manual. Or scan the QR code with your mobile phone.

The most important technical specifications for this product can be found on the last page of this Quick Guide.

Technical specifications, brochures, and more info about products at https://mikrotik.com/products

Configuration manual for software in your language with additional information can be found at https://mt.lv/help

MikroTik devices are for professional use. If you do not have qualifications please seek a consultant https://mikrotik.com/consultants

First steps:

Make sure your Internet service provider is allowing hardware change and will issue an IP address.
Open the bottom lid.
Plug the included PoE injector into the ISP outlet and attach an Ethernet cable to it.
Connect the other end of the Ethernet cable to this router.
Plug the provided power supply into the PoE injector.
Connect your computer to the wireless network.
Open https://192.168.88.1 in your web browser to start the configuration.
User name: admin and there is no password by default.
You will be logged into the configuration screen.
Click the “Check_for_updates” button on the right side and update your RouterOS software to the latest version. Must have an active Internet connection.
The device will reboot.
Choose your country on the left side of the screen, to apply country regulation settings.
Set the Installation to indoors or outdoors, depending on the usage type.
Set up your wireless network password, the password must be at least eight symbols.
Set up your router password in the bottom field to the right and repeat it, it will be used to log in next time.

Safety Information:

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product can be used both indoors and outdoors. Please read the mounting instructions carefully before beginning installation. Failure to use the correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
The socket-outlet shall be installed near the equipment and shall be easily accessible.
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet. Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public.

Manufacturer: Mikrotikls SIA, Unijas iela 2, Riga, Latvia, LV1039.
Note: For some models, check the user and wireless passwords on the sticker.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

UKCA marking

CE Declaration of Conformity

Hereby, Mikrotīkls SIA declares that the radio equipment type RBwAPG- 5HacD2HnD, RBwAPG-5HacD2HnD-BE is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products

Operating Frequency 2400-2483.5 MHz / 20 dBm
5150-5250 MHz / 23 dBm
5250-5350 MHz / 20 dBm
5470-5725 MHz / 27 dBm

This MikroTik device meets Maximum transmit power limits per ETSI regulations. For more detailed information see Declaration of Conformity above

The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

Technical Specifications

Product Power
DC Adapter Output Specification
IP class of the enclosure
Operating Temperature
DC Jack (10 – 57 V DC)
PoE In Ethernet Port (18 – 57 V DC) 24 0.8 IP54 -33°..+50°C