PHILIPS FS485F Smartbalance Free Floor Standing Instruction Manual
- June 13, 2024
- Philips
Table of Contents
Smartbalance
Free Floor Standing
FS485F/FS486F
FS485F Smartbalance Free Floor Standing
444316027191
583 – 444316027192
2023-05
© Signify Holding
All rights reserved
Printed in Data subject to change without notice Keep for future reference:
www.philips.com/lighting Country
| Electrical Characteristics
---|---
Imax (A)| 10
Tref (Is)| 35,9
MCB| No. of luminaires (max)
B-10A| 11
B-16A| 18
C-10A| 19
C-16A| 31
The plug must be plugged into an outlet that is installed and grounded in
accordance with all appropriate codes and ordinances. No adaptor should be
used with this appliance
ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
– The luminaire shall be installed by qualified electrician and wired in
accordance with the latest IEE electrical egulations or the national
requirements.
– The light source contained in this luminaire is non user replacable, it
shall only be replaced by the manufactureror his service agent or a similar
qualified person
– During the installation or maintaining the luminaire please use gloves to
avoid spots on the cover.
To remove dirt and spots use the following:
– Dust: use micro fiber cloths only.
– Fingerprints, etc.: use cleaner for synthetic materials with antistatic
properties.
– Luminaires not suitable for covering with thermally insulating material.
– For controllable luminaires, the classification of the insulation between LV
supply and control conductors shall be basic insulation at least.
– Luminaires must not be used or stored in corrosive environment where
hazardous materials such as Sulphur,Chlorine, Phthalates, etc., are present.
http://www.lighting.philips.com/main/systems/themes/service-tag.html
https://play.google.com/store/apps/details?id=com.philips.servicetag
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control
conductors.
The light source and/or control gear and/or the external flexible cable
contained in this luminaire shall only be replaced by the manufacturer or his
service agent or a similar qualified person.
Storage, installation, use, operation and maintenance of the products needs to
be performed exactly according the instructions in this manual and/or other
instructions as may be provided by us to guarantee safe use of the product
over its entire lifetime. Failure to adhere to these instructions will
invalidate your entitlement to warranty. Bolts with indication of torque
strength on the drawing need to be tightened using a calibrated torque wrench.
Pre-assembledbolts need to be retightened again to the required torque
specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or
label.
© 2023 Signify Holding
All rights reserved. This document contains information relating to the
product portfolio of Signify which information may be subject to change. No
representation or warranty as to the accuracy or completeness of the
information included herein is given and any liability for any action in
reliance thereon is disclaimed. The information presented in this document is
not intended as any commercial offer and does not form part of any quotation
or contract. Philips and the Philips Shield Emblem are registered trademarks
of Koninklijke Philips N.V.. All other trademarks are owned by Signify Holding
or their respective owners. Signify Holding The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>