milwaukee M18 Red Exterior Dual Slope Rotary Laser Receiver User Guide
- June 13, 2024
- Milwaukee
Table of Contents
milwaukee M18 Red Exterior Dual Slope Rotary Laser Receiver
Product Information
The Red Exterior Dual Slope Rotary Laser Level Kit is a versatile tool designed to assist with leveling and alignment tasks. It comes with a receiver and a remote control for added convenience.
Product Features
- Power button: Press to turn the laser level on, and hold to turn it off.
- Setting Grade: Allows you to edit values and change them using the D-PAD.
- Menu button: Use to enter or exit features, and select features using the D-PAD and OK buttons.
- Level: Changes the leveling mode of the laser level. Choose between n Level, n Slope, or n Manual Slope Mode. Use GRADE to switch between axes and OK to confirm values.
- Receiver & Remote Control Menu Navigation: Navigate through various settings and options using the MENU button.
- Channel Pairing: Pair the laser level with the receiver and remote control for seamless operation.
- Battery Gauge: Check the battery level of both the receiver and remote control.
- Audio: Adjust the audio settings of the laser level.
- Accuracy: Configure the accuracy settings of the laser level.
- Bump Alarm Status: Monitor the status of the bump alarm feature.
- RPM/Sweep: Control the rotational speed or sweep of the laser level.
- Masking: Use the D-PAD to hide specific quadrants where the laser should not be visible. Note the limitations on adjacent quadrants and total masked quadrants.
- Alignment: Manually align or slope the laser line using the remote control or laser’s D-PAD.
- Grade Match: Initiate the grade match sequence to align the laser with the center of the receiver.
- Channel Link: Configure the channel link settings to eliminate interruptions from other lasers on the same channel.
Product Usage Instructions
To use the Red Exterior Dual Slope Rotary Laser Level Kit, follow these steps:
- Power on the laser level by pressing the power button. Hold the power button to turn it off.
- To edit values and change them, press the GRADE button. Use the D-PAD to adjust the values as required.
- Press the MENU button to enter or exit features. Use the D-PAD and OK buttons to navigate and select features.
- To change the leveling mode, press the LEVEL button. Choose between n Level, n Slope, or n Manual Slope Mode. Use GRADE to switch between axes and OK to confirm values.
- For receiver and remote control menu navigation, use the MENU button. Navigate through settings and options using the D-PAD.
- Pair the laser level with the receiver and remote control by following the pairing instructions in the user manual.
- Check the battery gauge on both the receiver and remote control to ensure sufficient power.
- Adjust the audio settings of the laser level as per your preference.
- Configure the accuracy settings of the laser level according to your requirements.
- Monitor the bump alarm status to ensure proper functioning.
- Control the RPM/sweep speed of the laser level as needed.
- Use the D-PAD to mask desired quadrants where the laser should not be visible. Note the limitations on adjacent quadrants and total masked quadrants.
- Manually align or slope the laser line using the remote control or laser’s D-PAD.
- Initiate the grade match sequence to align the laser with the center of the receiver.
- Configure the channel link settings to eliminate interruptions from other lasers on the same channel.
For more detailed instructions and safety information, please refer to the Laser Manual provided with the product.
GET STARTED – LASER
POWER
- Press to turn ON, press and hold to turn OFF.
MENU
- Press Menu button to enter or exit features. Use D-PAD and OK button select features.
LEVEL
Changes the leveling mode the laser is currently in.
- Level
- Slope
- Manual Slope Mode
SETTING GRADE
- Press GRADE to start editing values.
- Use D-PAD to change values.
- Press GRADE to change between axes.
- Press OK to confirm values.
RECEIVER & REMOTE CONTROL MENU NAVIGATION
RECEIVER
MENU
- Press MENU to switch between feature list and readout.
GRADE MATCH
- Initiates grade match sequence.
REMOTE CONTROL
MENU
- Press MENU to view feature list or use to exit current feature without saving.
GRADE
- Access grade features menu.
FEATURES
PAIRING
- Used to pair the laser with receiver/remote. Laser and receiver/ remote kit will already be paired.
- RECEIVER and LASER: Place receiver into pairing mode then the laser. Press MENU BUTTON to toggle to pairing mode and D-PAD to select ON. With the receiver press OK to initiate pairing. The pairing icon in the status bar will FLASH while it searches for a pair. Select the PAIRING FEATURE from the menu on the LASER.
- Select “+Add Device.” When paired, laser will show a “PAIRED” graphic on the screen and the laser and receiver will make an audible tone.
- REMOTE CONTROL and LASER: Enter pairing mode and select “+Add Device.” Repeat process on the laser. Once paired, both laser and remote will show a “PAIRED” graphic on the screen and the laser will make an audible tone.
BUMP SENSITIVITY
- Laser defaults to High Sensitivity. The setting can be switched to Low Sensitivity with a paired remote control.
GRADE MATCH
- Laser automatically searches and aligns to the center of receiver.
- On RECEIVER press grade match button then toggle between grade match and center lock. Afterwards confirm axis. Press OK to confirm.
- On REMOTE/LASER select “Grade Match” in menu, then choose an axis to align to. Laser will move to find the center of receiver.
MASK
- Use the D-PAD to mask desired quadrants where the laser will be hidden.
- Note: Only adjacent quadrants can be masked. Only 3 total quadrants can be masked at any time.
SWEEP
- Different sweep angles can be selected between 10°, 45°, 90° and dot mode.
CHANNEL LINK
- Channel link can be used to eliminate interruptions from other lasers by only detecting devices on the same channel.
- On RECEIVER press MENU to toggle to channel link use D-PAD to select channel. Press OK to confirm.
- On REMOTE CONTROL or LASER: Select “Channel Link.” Select desired channel.
- Note: Changing channel on laser will update channel on all paired devices.
ALIGNMENT
- Manually align or slope the laser line with remote or laser’s D-PAD.
- Select axis to perform alignment
- Use the D-PAD to move laser up or down along the X or Y axis. To reset back to level, press the LEFT & RIGHT on the D-PAD simultaneously.
- To adjust vertical alignment, place the laser in the vertical orientation.
Read Laser Manual Before Use
Made in Vietnam
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>