TAFFIO Mercedes FY SERIES S CL CLASS User Guide
- June 13, 2024
- TAFFIO
Table of Contents
TAFFIO Mercedes FY-SERIES S / CL CLASS User Guide
QUICKGUIDE
TAFFIO®
Mercedes FY-SERIES S / CL CLASS
Installation
Optic Fiber / MOST
For vehicles with Optic Fiber Cable, remove the optic fiber from Original power harness and plug it into the new power harness, else you will have No sound.
Display LVDS Connection
Please connect yor original Display Plug in the right side and ignore the other side of Adaptor
LIN Connection
Remove the Plug from Control Panel an d connect to LIN Connector of Android Power Harness
Original Vehicle Control Buttons
If the keys are not displayed (swipe display from left to right) you need to check CAN protocol (point 3) or LIN connection (point 4).
Original Display Setting
Settings > Factory and enter the Code 190627
Tap on Vehicle and select your NTG Version NTG3.5 or 3.0
Tap Car Display and set your factory menu resolution
19-20 S CLASS NTG3.5
21-22 S CLASS NTG3.0
Tap Can Protocol and set your original NTG Version > type 3.0 / 3.5
Sound Settings
Settings > System > AUX Position
| If you want the android sound switch automatically: set AUX position as below |
|---|
AUX position 1:Audio(AUX) position on menu (Vertical). usually it is in second (2), some car it is in third (3), photo is 2 AUX position 2: Aux position in Audio list (Horizontal ), above photo it is 7
General Settings
Here you now have the following options
- Mirror rear view camera
- Lock or unlock video while driving
- Show / hide parking lines
- Switch the parking assistant (if your car have the function) on / off
- Select the rear view camera type> Original or retrofit
- Set the display brightness
- Activate / deactivate the muting of other sound sources when reversing
Navigation App
Android Settings
Date & Time, Language & more
By default, the system is set up to have a data connection and receives the time from the network
If you use the system without an Internet connection, it is advisable to change the time and date settings, otherwise the time will be reset each time the device is restarted
Settings > Android > System > Date and Time
Now deactivate the time and time zone from network and set both manually
