XS POWER HD-34BS Hold Down Instructions
- June 4, 2024
- XS Power
Table of Contents
\ XS POWER HD-34BS Hold Down
SPECIAL NOTE:
For a permanent installation we su[;aest using a couple drops of Loctite Blue on each screw thread to keep the screws from becoming lose over time, but can still be removed when needed
PARTS LIST
| Bottom Pf ate | 1 Piece |
|---|---|
| Ears | 2 Pieces |
| Short Screws | 6 Pieces |
| Washers | 2 Pieces |
| Nuts | 2 Pieces |
STEP 1 Locate where you want to mount the hold down and create the
required mounting holes. Mount the base by using two (2) short screws and the
two (2) washers, and two (2) nuts, included,
STEP 2 Attach the rubber bumpers to the bottom of the battery, one
(1) in each corner. (This step is optional). (See illustration 1 for bumper
locations).
STEP 3 Center the battery on the Hold Down base and attach the two (2)
ears with four (4) or the short screws include. Tighten the screws until the
ears hold the battery firmly in place. DO NOT OVER TIGHTEN OR DAMAGE TO YOUR
BATTERY MAY OCCUR.