DELL Latitude X300 300m Battery Charger User Guide
- June 13, 2024
- Dell
Table of Contents
- Dell™ Latitude™ X300 and Inspiron™ 300m Battery Charger
- **** Safety Instructions
- Battery Disposal
- About Your Battery Charger
- Checking the Battery Charge
- Low-Battery Warning
- Removing the Battery From the Computer
- Attaching the Battery to the Battery Charger
- Charging the Battery
- Removing the Battery From the Battery Charger
- Storing a Battery
- Specifications
- Regulatory Notices
- FCC Notices (U.S. Only)
- IC Notice (Canada Only)
- CE Notice (European Union)
- CE Mark Notice
- ENERGY STAR® Compliance
- Simplified Chinese Class A Warning Notice (China Only)
- VCCI Notice (Japan Only)
- Polish Center for Testing and Certification Notice
- Limited Warranty and Return Policy
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Dell™ Latitude™ X300 and Inspiron™ 300m Battery Charger
Using the Battery Charger
Regulatory Notices
Limited Warranty and Return Policy
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better
use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of
data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal
injury, or death.
Information in this document is subject to change without notice.
© 2003 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell
Computer Corporation is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Inspiron, Latitude, and
TrueMobile are trademarks of Dell Computer Corporation. ENERGY STAR is a
registered trademark of the U.S. Environmental Protection Agency. As an ENERGY
STAR Partner, Dell Computer Corporation has determined that this product meets
the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to
either the entities claiming the marks and names or their products. Dell
Computer Corporation disclaims any proprietary interest in trademarks and
trade names other than its own.
Model X0350
May 2003 P/N C2407 Rev. A00
Using the Battery Charger
Dell™ Latitude™ X300 and Inspiron™ 300m Battery Charger User’s Guid e
CAUTION:
**** Safety Instructions
Use the following safety guidelines to help ensure your own personal safety
and to help protect your computer and working environment from potential
damage.
General
These safety instructions relate to the interaction between the battery
charger, battery, and AC adapter. Consult the System Information Guide or the
Owner’s Manual for your computer for complete safety information on your
computer.
Use this battery charger only with the Dell battery module for which it is
intended. Use with other than the approved module may increase the risk of
fire or explosion.
Do not attempt to service the battery charger yourself unless you are a
trained service technician. Always follow installation instructions closely.
If you use a power strip with your AC adapter, ensure that the total ampere
rating of the products plugged in to the power strip does not exceed the
ampere rating of the power strip.
Do not push objects into air vents or openings of your computer. Doing so can
cause fire or electric shock by shorting out interior components.
Place the AC adapter in a ventilated area, such as a desk top or on the floor,
when you use it to run the computer or to charge the battery. Do not cover the
AC adapter with papers or other items that will reduce cooling; also, do not
use the AC adapter inside a carrying case.
The AC adapter may become hot during normal operation of your computer. Use
care when handling the adapter during or immediately after operation.
Do not allow your battery charger to operate with the base resting directly on
exposed skin for extended periods of time. The surface temperature of the base
will rise during normal operation (particularly when AC power is present).
Allowing sustained contact with exposed skin can cause discomfort or,
eventually, a burn.
Do not use your battery charger in a wet environment, for example, near a bath
tub, sink, or swimming pool or in a wet basement
To help avoid the potential hazard of electric shock, do not connect or
disconnect any cables or perform maintenance or reconfiguration of this
product during an electrical storm. Do not use your battery charger during an
electrical storm unless all cables have been disconnected and the computer is
operating on battery power.
Before you clean your battery charger, remove power. Clean your battery
charger with a soft cloth dampened with water. Do not use liquid or aerosol
cleaners, which may contain flammable substances.
Power
Use only the Dell-provided AC adapter approved for use with this battery
charger. Use of another AC adapter may cause a fire or explosion.
Before you connect the battery charger to an electrical outlet, check the AC
adapter voltage rating to ensure that the required voltage and frequency match
the available power source.
To remove the battery charger from all power sources, turn the computer off,
remove the battery pack, and disconnect the AC adapter from the electrical
outlet.
To help prevent electric shock, plug the AC adapter and peripheral power
cables into properly grounded power sources. These power cables may be
equipped with three-prong plugs to provide an earth grounding connection. Do
not use adapter plugs or remove the grounding prong from the power cable plug.
If you use a power extension cable, use the appropriate type, two-prong or
three-prong, to mate with the AC adapter power cable.
Be sure that nothing rests on your AC adapter’s power cable and that the cable
is not located where it can be tripped over or stepped on.
If you are using a multiple-outlet power strip, use caution when plugging the
AC adapter’s power cable into the power strip. Some power strips may allow you
to insert the plug incorrectly. Incorrect insertion of the power plug could
result in permanent damage to your computer, as well as risk of electric shock
and/or fire. Ensure that the ground prong of the power plug is inserted into
the mating ground contact of the power strip.
Battery
Use only Dell battery modules that are approved for use with your computer.
Use of other types may increase the risk of fire or explosion.
Do not carry a battery pack in your pocket, purse, or other container where
metal objects (such as car keys or paper clips) could short-circuit the
battery terminals. The resulting excessive current flow can cause extremely
high temperatures and may result in damage to the battery pack or cause fire
or burns.
The battery poses a burn hazard if you handle it improperly. Do not
disassemble it. Handle a damaged or leaking battery pack with extreme care. If
the battery is damaged, electrolyte may leak from the cells and may cause
personal injury.
Keep the battery away from children.
Do not store or leave your computer or battery pack near a heat source such as
a radiator, fireplace, stove, electric heater, or other heat-generating
appliance or otherwise expose it to temperatures in excess of 60ºC (140ºF).
When heated to excessive temperatures, battery cells could explode or vent,
posing a risk of fire.
Do not dispose of your computer’s battery in a fire or with normal household
waste. Battery cells may explode. Discard a used battery according to the
manufacturer’s instructions or contact your local waste disposal agency for
disposal instructions. Dispose of a spent or damaged battery promptly.
When Using Your Battery Charger
Observe the following safe-handling guidelines to prevent damage to your
battery charger:
-
When setting up the battery charger for work, place it on a level surface.
-
Protect your battery charger from environmental hazards such as dirt, dust, food, liquids, temperature extremes, and overexposure to sunlight.
-
When you move your battery charger between environments with very different temperature and/or humidity ranges, condensation may form on or within the computer. To avoid damaging the battery charger, allow sufficient time for the moisture to evaporate before using the battery charger.
NOTICE: When taking the battery charger from low-temperature conditions into a warmer environment or from high-temperature conditions into a
cooler environment, allow the battery charger to acclimate to room temperature before turning on power. -
When you disconnect a cable, pull on its connector on its strain-relief loop, not on the cable itself. As you pull out the connector, keep it evenly aligned to avoid bending any connector pins. Also, before you connect a cable make sure both connectors are correctly oriented and aligned
-
If your battery charger gets wet or is damaged, follow the procedures described in “Solving Problems.” If, after following these procedures, you confirm that your battery charger is not operating properly, contact Dell (see “Getting Help” in your the documentation that came with your computer for the appropriate contact information).
Battery Disposal
Your computer uses a lithium-ion battery and a nickel-metal hydride (NiMH)
coin-cell battery. For instructions about replacing the lithium-ion battery in
your computer, refer to the section about replacing the battery in your Dell
computer documentation. The NiMH battery is a long-life battery, and it is
very possible that you will never need to replace it. However, should you need
to replace it, the procedure must be performed by an authorized service
technician.
Do not dispose of the battery along with household waste. Contact your local
waste disposal agency for the address of the nearest battery deposit site.
About Your Battery Charger
Top View 1. battery charger light
Side View
1 AC adapter connector
Bottom View
1 battery charger latch release (2)
Checking the Battery Charge
You can check the battery charge before you remove the battery from the
computer and attach it to the battery charger. You can also set power
management options to alert you when the battery charge is low.
The Microsoft® Windows® power meter window and icon, the battery charge gauge,
and the low-battery warning provide information on the battery charge.
Power Meter
The Windows power meter indicates the remaining battery charge. To check the
power meter:
Double-click the icon in the taskbar, or:
- Open the Control Panel.
- Double-click the Power Options (or Power Management) icon to open the Power Options Properties window.
- Click the Power Meter tab.
The Power Meter tab displays the current power source and amount of battery
charge remaining.
If the computer is connected to an electrical outlet, the icon appears.
Battery Charge Gauge
Before you attach the battery charger to the battery, press the status button
on the battery charge gauge to illuminate the charge-level lights. Each light
represents approximately 20 percent of the total battery charge. For example,
if the battery has 80 percent of its charge remaining, four of the five lights
are on. If no lights appear, the battery has no charge.
Low-Battery Warning
NOTICE: To avoid losing or corrupting data, save your work immediately
after a low-battery warning. Then connect the computer to an electrical
outlet.
If the battery runs completely out of power, hibernate mode begins
automatically.
A pop-up window warns you when the battery charge falls below a certain
percentage that is set in the Power Options Properties window. For more
information on low-battery alarms, see “Power Management” in your online
documentation.
Removing the Battery From the Computer
CAUTION: Before performing these procedures, disconnect the modem from
the telephone wall jack and read and follow the safety instructions.
NOTICE: You cannot undock your computer while your computer is in standby
mode or hibernate mode.
NOTICE: If you choose to replace the battery with the computer in standby
mode, you have up to 1 minute to complete the battery replacement. The
computer will shut down shortly after this.
- Ensure that the computer is turned off, suspended in a power management mode, or connected to an electrical outlet.
- If the computer is connected to a media base (docked), undock it. See the documentation that came with your media base for instructions.
- Slide out the battery-bay latch releases on the bottom of the computer and remove the battery from the bay.
- Ensure that the computer is turned off, in hibernate mode, or connected to an electrical outlet.
1 battery latch release (2)
Attaching the Battery to the Battery Charger
-
Align the bottom of the battery with the bottom of the battery charger.
-
Slide the battery into the battery charger connector, and slide the battery tabs into the battery charger slots until it clicks into place.
-
battery latch
-
battery charger
-
battery charger slots (2)
-
battery
Charging the Battery
- Remove the battery from the computer and attach the battery to the battery charger (see Removing the Battery From the Computer and Attaching the Battery to the Battery Charger).
- Connect the AC adapter to the AC adapter connector on the battery charger and to the electrical outlet.
CAUTION: If you are using a multiple-outlet power strip, use caution when
you plug the AC adapter power cable into the power strip. Some power strips
may allow you to insert the plug incorrectly. Incorrect insertion of the power
plug could result in permanent damage to your computer, as well as risk of
electric shock and/or fire. Ensure that you insert the ground prong of the
power plug into the mating ground contact of the power strip.
Battery operating time varies depending on operating conditions. You can use
the battery charger to charge a 28 WHr battery or an optional 65 WHr extended
battery.
While the battery is charging, the battery charger light is green. When the
battery is fully charged, the battery charger light blinks green. If errors
occur while charging, the battery charger light blinks amber.
For information on resolving battery problems, see “Solving Problems” in the
documentation that came with your computer.
Removing the Battery From the Battery Charger
NOTICE: When you disconnect the AC adapter from the battery charger, hold the adapter cable connector, not the cable itself, and pull firmly but gently to avoid damaging the cable.
- Disconnect the AC adapter from the electrical outlet and the battery charger.
- Slide the battery charger latch and gently pull the battery out of the battery charger connector.
Storing a Battery
Remove any installed battery pack when you store your computer for an extended period of time. A battery discharges during prolonged storage. After a long storage period, recharge the battery fully before you run the computer on battery power.
Specifications
Battery Charger
Dimensions:|
---|---
Depth| 35 mm (1.4 inches)
Height| 15 mm (0.6 inch)
Width| 212 mm (8.3 inches)
Weight (typical)| 0.07 kg (0.15 lbs)
Voltage:|
Input| 20 VDC
Output| 9.0 VDC (nominal)
Charge current (maximum)| 3.0 A with 58-WHr battery
3.0 A with 27-WHr battery
Charge time (approximate)| 3 hours with 58-WHr battery
1.5 hours with 27-WHr battery
Temperature range:|
Operating| 0° to 40°C (32° to 104°F)
Storage| –65° to 150°C (–85° to 302°F)
AC Adapter
Input voltage | 90–135 VAC and 164–264 VAC |
---|---|
Input current (maximum) | 1.2 A |
Input frequency | 47–63 Hz |
Output current (maximum) | 2.5 A |
Output power | 50 W |
Rated output voltage | 20 VDC |
Dimensions (without cord manager): | |
Height | 27.5 mm (1.08 inches) |
Width | 47 mm (1.85 inches) |
Depth | 95 mm (3.74 inches) |
Weight (including DC cable) | 0.41 kg (0.9 lb) |
Temperature range: | |
Operating | 0° to 40°C (32° to 104°F) |
Storage | –40° to 70°C (–40° to 158°F) |
Regulatory Notices
Dell™ Latitude™ X300 and Inspiron™ 300m Battery Charger User’s Guide
Electromagnetic Interference (EMI) is any signal or emission, radiated in free
space or conducted along power or signal leads, that endangers the functioning
of a radio navigation or other safety service or seriously degrades,
obstructs, or repeatedly interrupts a licensed radio communications service.
Radio communications services include but are not limited to AM/FM commercial
broadcast, television, cellular services, radar, air-traffic control, pager,
and Personal Communication Services (PCS). These licensed services, along with
unintentional radiators such as digital devices, including computers,
contribute to the electromagnetic environment.
Electromagnetic Compatibility (EMC) is the ability of items of electronic
equipment to function properly together in the electronic environment. While
this computer has been designed and determined to be compliant with regulatory
agency limits for EMI, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause interference with
radio communications services, which can be determined by turning the
equipment off and on, you are encouraged to try to correct the interference by
one or more of the following measures:
- Reorient the receiving antenna.
- Relocate the computer with respect to the receiver.
- Move the computer away from the receiver.
- Plug the computer into a different outlet so that the computer and the receiver are on different branch circuits.
If necessary, consult a Dell Technical Support representative or an
experienced radio/television technician for additional suggestions.
Dell computers are designed, tested, and classified for their intended
electromagnetic environment. These electromagnetic environment classifications
generally refer to the following harmonized definitions:
- Class A is typically for business or industrial environments.
- Class B is typically for residential environments.
Information Technology Equipment (ITE), including devices, expansion cards,
printers, input/output (I/O) devices, monitors, and so on, that are integrated
into or connected to the computer should match the electromagnetic environment
classification of the computer.
A Notice About Shielded Signal Cables: Use only shielded cables for connecting
devices to any Dell device to reduce the possibility of interference with
radio communications services. Using shielded cables ensures that you maintain
the appropriate EMC classification for the intended environment. For parallel
printers, a cable is available from Dell. If you prefer, you can order a cable
from Dell on the World Wide Web at
accessories.us.dell.com/sna/category.asp?category_id=4117.
Most Dell computers are classified for Class B environments. However, the
inclusion of certain options can change the rating of some configurations to
Class A. To determine the electromagnetic classification for your computer or
device, refer to the following sections specific for each regulatory agency.
Each section provides country-specific EMC/EMI or product safety information.
FCC Notices (U.S. Only)
Most Dell computers are classified by the Federal Communications Commission
(FCC) as Class B digital devices. To determine which classification applies to
your computer, examine all FCC registration labels located on the bottom or
back panel of your computer, on card-mounting brackets, and on the cards
themselves. If any one of the labels carries a Class A rating, your entire
computer is considered to be a Class A digital device. If all labels carry an
FCC Class B rating as distinguished by either an FCC ID number or the FCC
logo, ( ), your computer is considered to be a Class B digital device.
Once you have determined your computer’s FCC classification, read the
appropriate FCC notice. Note that FCC regulations provide that changes or
modifications not expressly approved by Dell could void your authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Class A
This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer’s instruction manual, may cause
harmful interference with radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference, in which case you
will be required to correct the interference at your own expense.
Class B
This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause interference with radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
The following information is provided on the device or devices covered in this document in compliance with FCC regulations:
- Model number: X0350
- Company name:
Dell Computer Corporation
One Dell Way
Round Rock, Texas 78682 USA
IC Notice (Canada Only)
Most Dell computers (and other Dell digital apparatus) are classified by the
Industry Canada (IC) Interference-Causing Equipment Standard #3 (ICES-003) as
Class B digital devices. To determine which classification (Class A or B)
applies to your computer (or other Dell digital apparatus), examine all
registration labels located on the bottom or the back panel of your computer
(or other digital apparatus). A statement in the form of “IC Class A ICES-003”
or “IC Class B ICES003” will be located on one of these labels. Note that
Industry Canada regulations provide that changes or modifications not
expressly approved by Dell could void your authority to operate this
equipment.
This Class B (or Class A, if so indicated on the registration label) digital
apparatus meets the requirements of the Canadian Interference-Causing
Equipment Regulations.
CE Notice (European Union)
Marking by the symbol indicates compliance of this Dell computer to the EMC Directive and the Low Voltage Directive of the European Union. Such marking is indicative that this Dell system meets the following technical standards:
- EN 55022 — “Information Technology Equipment — Radio Disturbance Characteristics — Limits and Methods of Measurement.”
- EN 55024 — “Information Technology Equipment – Immunity Characteristics – Limits and Methods of Measurement.”
- EN 61000-3-2 — “Electromagnetic Compatibility (EMC) – Part 3: Limits – Section 2: Limits for Harmonic Current Emissions (Equipment Input Current Up to and Including 16 A Per Phase).”
- EN 61000-3-3 — “Electromagnetic Compatibility (EMC) – Part 3: Limits – Section 3: Limitation of Voltage Fluctuations and Flicker in Low-Voltage Supply Systems for Equipment With Rated Current Up to and Including 16 A.”
- EN 60950 — “Safety of Information Technology Equipment.”
NOTE: EN 55022 emissions requirements provide for two classifications:
- Class A is for typical commercial areas.
- Class B is for typical domestic areas.
This Dell device is classified for use in a typical Class B domestic
environment.
A “Declaration of Conformity” in accordance with the preceding directives and
standards has been made and is on file at Dell Computer Corporation Products
Europe BV, Limerick, Ireland.
CE Mark Notice
This equipment complies with the essential requirements of the European Union Directive 1999/5/EC.
ENERGY STAR® Compliance
Certain configurations of Dell™ computers comply with the requirements set
forth by the Environmental Protection Agency (EPA) for energy-efficient
computers. If the front panel of your computer bears the ENERGY STAR® Emblem,
your original configuration complies with these requirements and all ENERGY
STAR® power management features of the computer are enabled.
NOTE: Any Dell computer bearing the ENERGY STAR® Emblem is certified to comply
with EPA ENERGY STAR® requirements as configured when shipped by Dell. Any
changes you make to this configuration (such as installing additional
expansion cards or drives) may increase the computer’s power consumption
beyond the limits set by the EPA’s ENERGY STAR® Computers program.
ENERGY STAR® Emblem
The EPA’s ENERGY STAR® Computers program is a joint effort between the EPA and
computer manufacturers to reduce air pollution by promoting energyefficient
computer products. The EPA estimates that use of ENERGY STAR® computer
products can save computer users up to two billion dollars annually in
electricity costs. In turn, this reduction in electricity usage can reduce
emissions of carbon dioxide, the gas primarily responsible for the greenhouse
effect, and sulfur dioxide and nitrogen oxides, the primary causes of acid
rain.
You can also help reduce electricity usage and its side effects by turning off
your computer when it is not in use for extended periods of time, particularly
at night and on weekends.
Simplified Chinese Class A Warning Notice (China Only)
On Class A systems, the following warning will appear near the regulatory
label:
Warning: This is a Class A product. In a domestic environment this
product may cause radio interference, in which case the user may be required
to take adequate measures.
EN 55022 Compliance (Czech Republic Only )
This device belongs to Class B devices as described in EN 55022, unless it is
specifically stated that it is a Class A device on the specification label.
The following applies to devices in Class A of EN 55022 (radius of protection
up to 30 meters). The user of the device is obliged to take all steps
necessary to remove sources of interference to telecommunication or other
devices.
VCCI Notice (Japan Only)
Most Dell computers are classified by the Voluntary Control Council for
Interference (VCCI) as Class B information technology equipment (ITE).
However, the inclusion of certain options can change the rating of some
configurations to Class A. ITE, including devices, expansion cards, printers,
input/output (I/O) devices, monitors, and so on, integrated into or connected
to the computer should match the electromagnetic environment classification
(Class A or B) of the computer.
To determine which classification applies to your computer, examine the
regulatory labels/markings (see “VCCI Class A ITE Regulatory Mark” and “VCCI
Class B ITE Regulatory Mark”) located on the bottom or back panel of your
computer. Once you have determined your computer’s VCCI classification, read
the appropriate VCCI notice.
Class A ITE
This is a Class A product based on the standard of the Voluntary Control
Council for Interference (VCCI) for information technology equipment. If this
equipment is used in a domestic environment, radio disturbance may arise. When
such trouble occurs, the user may be required to take corrective actions.
VCCI Class A ITE Regulatory Mark
VCCI
Class B ITE
This is a Class B product based on the standard of the Voluntary Control
Council for Interference (VCCI) for information technology equipment. If this
equipment is used near a radio or television receiver in a domestic
environment, it may cause radio interference. Install and use the equipment
according to
the instruction manual.
VCCI Class B ITE Regulatory Mark
If the regulatory label includes the following marking, your computer is a
Class B product:
MIC Notice (Republic of Korea Only)
To determine which classification (Class A or B) applies to your computer (or
other Dell digital device), examine the Republic of Korean Ministry of
Information and Communications (MIC) registration labels located on your
computer (or other Dell digital device). The MIC label may be located
separately from the other regulatory marking applied to your product. Line two
of the label identifies the emissions class for the product—”(A)” for Class A
products or “(B)” for Class B products.
NOTE: MIC emissions requirements provide for two classifications:
- Class A devices are for business purposes.
- Class B devices are for nonbusiness purposes.
Class A Device
Please note that this device has been approved for business purposes with
regard to electromagnetic interference. If you find that this device is not
suitable for your use, you may exchange it for a nonbusiness-purpose device.
MIC Class A Regulatory Label
If the regulatory label includes the following marking, your computer is a
Class A product:
Class B Device
Please note that this device has been approved for nonbusiness purposes and
may be used in any environment, including residential areas.
MIC Class B Regulatory Label
If the regulatory label includes the following marking, your computer is a
Class B product.
Polish Center for Testing and Certification Notice
The equipment should draw power from a socket with an attached protection
circuit (a three-prong socket). All equipment that works together (computer,
monitor, printer, and so on) should have the same power supply source.
The phasing conductor of the room’s electrical installation should have a
reserve short-circuit protection device in the form of a fuse with a nominal
value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be removed
from the power supply socket, which should be located near the equipment and
easily accessible.
A protection mark “B” confirms that the equipment is in compliance with the
protection usage requirements of standards PN-93/T-42107 and PN-EN 55022.
BSMI Notice (Taiwan Only)
NOM Information (Mexico Only)
The following information is provided on the device(s) described in this
document in compliance with the requirements of the official Mexican standards
(NOM):
Exporter:| Dell Computer Corporation
One Dell Way
Round Rock, TX 78682
---|---
Importer:| Dell Computer de México, S.A. de C.V.
Paseo de la Reforma 2620 – 11° Piso
Col. Lomas Altas
11950 México, D.F.
Ship to:| Dell Computer de México,
S.A. de C.V. al Cuidado de Kuehne &
Nagel de México S. de R.I.
Avenida Soles No. 55
Col. Peñon de los Baños
15520 México, D.F.
Model number:| X0350
Supply voltage:| 100–240 VAC
Frequency:| 50–60 Hz
Current Consumption:| 1.5 A
Output voltage:| 19.5 VDC
Output current:| 3.34 A
Limited Warranty and Return Policy
Dell™ Latitude™ X300 and Inspiron™ 300m Battery Charger User’s Guide
Dell Computer Corporation (“Dell”) manufactures its hardware products from
parts and components that are new or equivalent to new in accordance with
industry-standard practices. For information about the Dell limited warranty
for your computer, see the System Information Guide.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>