Nisheng GTS2 Smart Watch For Android Phones User Manual

Nisheng GTS2 Smart Watch For Android Phones

PRODUCT INFORMATION

Thanks for purchasing this product. Please read this Manual carefully before use

PRODUCT FEATURES

• Model
  GTS2

• Battery Capacity
  230 mAh

• Charging Time
  about 2 hours

• Waterproof Level
  1P68

• Screen Type
  1.69°-inch color screen

• Charging Voltage
  5V

• Battery Life
  8 days

• Bluetooth Version
  BLE5.0

Product Overview

Physical button function

• Short press to return.
• Short press to turn on the screen when the screen is off.
• Long press for 3 seconds to turn on/off.

Charging instructions

• Attach the charger interface to the bottom of the watch, charge it for 5 minutes, or press and hold the button for 3 seconds to activate the boot.
• No specific charger is required; you can use any USB charging port to charge the watch.

APP download and connection

APP download
Please download and install the “Runmefit” application in AppStore, or Google or scan the QR code on the right to download.

Pairing
Please turn on the Bluetooth of the mobile phone before pairing, and then you must perform the Bluetooth pairing in the APP, Bluetooth pairing cannot be performed in the mobile phone system. There are two ways to pair:

• Click “Add Device” on the “Devices” interface of the APP, and the Bluetooth search interface will pop up. Next, find the corresponding Bluetooth name to pair.
• You can also click Scan Code to connect to the APP and scan the connection OR code on the device to pair.

Function introduction

This device has a wealth of functions, mainly including the following:

• Health functions: heart rate detection, blood oxygen saturation, blood pressure detection, temperature detection, static high heart rate reminder, sleep monitoring, pressure monitoring, breathing training, drinking water reminder, and sedentary reminder.
• Sports functions: 100 sports modes, MET-sports vitality index monitoring, sports data recording.
• Others: message reminder, weather, music control, timer, stopwatch, alarm clock reminder, phone call reminder, flashlight, Etc.

Precautions

• The waterproof level of this product is IP68, and can only use it for daily waterproof protection, such as washing hands, rain, Etc.;
• Do not take it for swimming, diving, surfing, and other water sports;
• Do not use it in high-temperature places such as saunas and steam rooms. The high-temperature environment will significantly increase the probability of water entering the watch;
• This product is not a medical device. Therefore, all the measured data and results are for reference only and not for medical evidence.

FAQ

Can not search the Bluetooth of the device in the APP
It is possible that when you connected the device, you linked directly to the Bluetooth of the mobile phone system. Therefore, the connected device needs to be connected to the APP and not join in the phone settings. If the Bluetooth has bound in the phone settings, please unbind in the phone settings first, and then enter the APP to search for Bluetooth to bound.

Note : A Bluetooth pairing request will pop up when the watch has connected to the lOS system. You need to click Allow pairing to connect the device normally.

The APP can’t synchronize the data of the smartwatch
The Bluetooth wireless connection may have signal interference and other reasons, which may cause the link or data synchronization time to be too long. In addition, the Bluetooth of some mobile phones may occasionally be abnormal when starting up. Therefore, it is better to restart the phone’s Bluetooth before pairing.

The watch cannot be charged
Please make sure that the positive and negative poles of the charging port are not reversed and that the charger is powered on; when the battery of the watch is too low, there will be a period of battery pre-charging time.

The time of the watch is not accurate
When the device is fully charged after a dead battery or has not been used for a long time, there may be errors in the time. However, as long as the APP is connected, the time will be automatically synchronized.

Heart rate detection will fail or be inaccurate.
These conditions may be caused by non-standard wearing methods, such as light leakage due to incomplete fit to the skin, movement of the watch on the skin, wearing the watch too tightly, raising the arm, and making a fist that affects the blood circulation, Etc. These conditions may affect the heart rate measurement. The correct measurement method requires laying your arms flat, relaxing your body, and keeping it still while ensuring that the watch is close to your wrist.

The number of steps recorded by the watch is inaccurate or wrong.

The following conditions may cause it:

• The arm swing amplitude, frequency, and law of the arm swing will have a particular impact on the step count. In addition, the accuracy of the watch’s step count is related to the walking posture, walking habits, walking speed, walking continuity, and road conditions.
• Please fill in various information correctly in the APP and synchronize it to the watch, including gender, height, weight, and age, all of which will affect the step-counting algorithm.
• In daily life, we often shake our arms or bodies. In some scenes, the shaking is regular, and the watch will misjudge it as walking.
• If only a few steps are taken when counting steps and the movement is not continuous, the watch may not record.
• The watch does not have a GPS positioning function, so there will be a specific error in step counting in sports mode.

For more questions (for example, no message reminder), please check “My”-“Questions and Help” in the APP.

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>