vtech Shake It Bluey Official Character Interactive Toddler Toy Instruction Manual

: June 13, 2024
: vtech

Table of Contents

vtech Shake It Bluey Official Character Interactive Toddler Toy
Product Information
Product Usage
Care & Maintenance
INTRODUCTION
INCLUDED IN THE PACKAGE
GETTING STARTED
ACTIVATE NORMAL PLAY MODE
PRODUCT FEATURES
ACTIVITIES
CARE & MAINTENANCE
TROUBLESHOOTING
FCC NOTE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

vtech Shake It Bluey Official Character Interactive Toddler Toy

Product Information

The Shake It Bluey toy is a cute pup that offers five fun movements with sounds. It is designed for real-life play and comes with various features:

Turn Head: Bluey’s head can be turned to the left and right to hear fun responses.
Nose Button: Press Bluey’s nose to hear her sniff and sneeze.
Wave Arm: Wave Bluey’s right arm to hear fun responses.
Bop Body: Bop Bluey’s body to count and listen to melodies.
Shake Shaker: Shake the Shaker to hear sounds and melodies.
Light-Up Tummy: Bluey’s tummy lights up with sounds and music.
Off/Mode Selector: Slide the selector to Free-Play mode or Follow Me mode to turn the unit on and start playing.
Volume Switch: Adjust the volume by switching to Low/High position.
Automatic Shut-Off: The toy shuts off automatically after several minutes without input to preserve battery life.

Product Usage

Package Contents
The package includes:

Shake It Bluey toy
Instruction Manual

Battery Installation

Make sure the unit is turned off.
Locate the battery cover at the back of Bluey’s head.
Use a screwdriver to loosen the screw and open the battery cover.
Remove the old batteries by pulling up on one end of each battery.
Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. We recommend using alkaline batteries or fully charged Ni-MH rechargeable batteries for best performance.
Replace the battery cover and tighten the screw to secure it.
WARNING: Adult assembly is required for battery installation. Keep batteries out of reach of children.

Activating Normal Play Mode
The product is initially set to Try-Me mode in the packaging. To activate normal play mode:

Turn the toy on.
Switch the Volume Switch from High to Low.
You will hear two du sounds, and Bluey’s tummy will flash twice, indicating that normal play mode is activated.

Activities

Free-Play Mode: In Free-Play mode, press a button or move Bluey’s body to activate sounds, phrases, and music.
Follow Me Mode: In Follow Me mode, follow th directions with upbeat music to play. There are three progressive levels that allow less time for input as the level increases.

Care & Maintenance

Keep the unit clean by wiping it with a slightly damp cloth.
Avoid exposing the unit to direct sunlight and direct heat sources.
If the unit will not be used for an extended period of time, remove the batteries.
Avoid dropping the unit on hard surfaces and do not expose it to excessive moisture.
If the unit powers down or if the light fades out during play, install a new set of batteries.

INTRODUCTION

Thank you for purchasing the Shake It Bluey toy! This cute pup has five fun movements with sounds. Let’s play a game together for real life!

INCLUDED IN THE PACKAGE

Shake It Bluey
Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.

Unlock the Packaging Locks

Turn the packaging lock counterclockwise several times.
Pull out and discard the packaging lock.

GETTING STARTED

Battery Removal and Installation

Make sure the unit is turned Off.
Find the battery cover located on the back of Bluey’s head, use a screwdriver to loosen the screw, and then open the battery cover.
Remove old batteries by pulling up on one end of each battery.
Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
Replace the battery cover and tighten the screw to secure.

WARNING:

  * Adult assembly required for battery installation.
  * Keep batteries out of reach of children.

IMPORTANT: BATTERY INFORMATION

Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES

Remove rechargeable batteries (if removable) from toy before charging.
Rechargeable batteries are only to be charged under adult supervision.
Do not charge non-rechargeable batteries.

ACTIVATE NORMAL PLAY MODE

This product is in Try-Me mode in the packaging. When you play with Shake It Bluey for the first time, turn the toy on then switch the Volume Switch from High to Low. You will hear two “du” sounds and Bluey’s tummy will flash twice to indicate normal play mode.

PRODUCT FEATURES

Off/Mode Selector
Slide the Off/Mode Selector to Free-Play mode or Follow Me mode to turn the unit On and start playing. To turn the unit Off, slide the selector to Off .
Turning Head
Turn Bluey’s head to the left and right to hear fun responses.
Sniffing Nose
Press Bluey’s nose to hear her sniff and sneeze.
Waving Arm
Wave Bluey’s right arm to hear fun responses.
Shake Shaker
Shake the Shaker to hear sounds and melodies.
Bopping Body
Bop Bluey’s body to count and listen to melodies.
Light-Up Tummy
See Bluey’s tummy light up with the sounds and music.
Volume Switch
Switch to Low/High volume position to adjust the volume.
Automatic Shut-Off
To preserve battery life, the Shake It Bluey will shut off automatically after several minutes without input. The unit can be turned on again by sliding the Off/Mode Selector. The unit will also automatically turn off when the batteries are low. Bluey’s tummy will flash three times as a reminder to change the batteries.
NOTE
If the unit powers down or if the light fades out during play, please install a new set of batteries.

ACTIVITIES

Free-Play Mode
In Free Play mode, press a button or move Bluey’s body to activate sounds, phrases and music.
Follow Me Mode
In Follow Me mode, follow the directions with upbeat music to play. Three progressive levels allow less time for input as the level increases.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries if the unit will not be in use for an extended period of time.
Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
Do not apply force when moving Bluey’s body.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

Turn the unit Off.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit back On. The unit should now be ready to use again.
If the unit still does not work, install a new set of batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or by going to our website vtechkids.com and filling out our Contact Us form located under the Customer Support link. Creating and developing VTech products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

FCC NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information

Trade Name: VTech®
Model: 5602
Product Name: Shake it Bluey
Responsible Party: VTech Electronics North America, L.L.C.
Address: 1156 W. Shure Drive, Suite 200
Arlington Heights, IL 60004
Website: vtechkids.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. CAN ICES-003(B)/NMB-003(B)