Waykar CFD2.5D Commercial Dehumidifier for Crawl Spaces User Manual

Waykar CFD2.5D Commercial Dehumidifier for Crawl Spaces

Product Information

Home Dehumidifier (CFD2.5D)

The Home Dehumidifier (CFD2.5D) is a powerful and efficient device designed to remove excess moisture from the air in your home. It is equipped with advanced features such as an LCD display, humidity sensor, and timer function to provide optimal performance and convenience.

Safety Instructions

Before using the unit, please read the manual carefully and keep it for future reference. Follow the installation and operation instructions provided in the manual to ensure safe and proper usage of the dehumidifier.

Structure Description

• Air Outlet Grilles: Allow the dehumidifier to release dry air into the room.
• Humidity Sensor: Measures the humidity level in the room.
• Interface Display Panel: Features an LCD display that shows various settings and information.
• Power Cable: Connects the dehumidifier to a power source.

Operation Instructions

Button Description

• Power Button: Press to turn the machine on/off. The LCD screen will light up when the machine is powered on.
• Up Button: Use to set the humidity value or timer setting increments.
• Down Button: Use to set the humidity value or timer setting decrements.
• Timing/Function Button: Long press to enter the timer setting mode, short press to confirm parameter settings.

Humidity Setting

In power-on status, press the up or down button once to set the humidity value. The large figure on the LCD screen will flash to display the humidity value. The humidity value can be set between 10-98% RH.

The humidity setting mode will automatically exit if there is no operation for a few seconds or if the Timer/Function button is pressed once.

TIMER Setting

The TIMER Setting function allows you to schedule the dehumidifier to turn on or off automatically at a specific time.

In power-on/off status, long press the TIMER button to enter the timer setting mode. The small figure on the LCD screen will flash to display the initial setting time as 00.

Within the timer setting mode, use the Up or Down button to adjust the setting time between 1-24 hours. The timer can be set again if needed.

If no TIMER setting is made, the small figure will display the current temperature. Once a TIMER is successfully set, the small figure will display the remaining setting time. Pressing the Timer/Function button allows you to check the current temperature again.

Action Description
Power On: Compressor 1 starts after the fan has worked for a few seconds; compressor 2 starts after compressor 1 has worked for another few seconds.

Power Off: Compressor 1 and compressor 2 shut down at once, and the fan will stop after a few seconds.

Common Troubleshooting
Refer to the manual’s “Common Troubleshooting” section for solutions to common issues that may arise during usage.

Cleaning & Maintenance
Proper cleaning and maintenance of the dehumidifier are  important for optimal performance. Refer to the manual’s “Cleaning & Maintenance” section for detailed instructions on how to clean and maintain the unit.

Warranty
The dehumidifier comes with a warranty. Refer to the manual’s “Warranty” section for information on warranty coverage and how to contact customer support for assistance.

Please read the manual carefully before using the unit

FOR CUSTOMERS

Thank you for purchasing our dehumidifier.
Waykar wishes that our products and services can bring convenience to your work and life. We highly recommend that you keep the manual for reference if you encounter unexpected events using the unit.
Please read the manual carefully to ensure proper use of the dehumidifier.
Our dehumidifiers are widely used in family bedrooms, bathrooms, basements, offices and storage rooms, etc.
The dehumidifiers from Waykar provide quick and efficient operation to reduce room’s humidity and bring you a healthy and comfortable life.

TOACCESS CUSTOMER SUPPORT FASTER
If there is any problem of the product, please contact Waykar Customer
Service at support@waykar.com with your Purchase Order ID to help you address the problem more effectively.

BEFORE FIRST USE

To prevent any internal damage, it is very important to keep refrigeration units (like this one) upright throughout their journey.
Please leave it standing upright and outside the box for 24 HOURS before plugging it in.

Safety Instructions

Important Notes:
For your safety, please read the manual carefully and keep the manual for future reference. Please use this product according to the instructions of installation and operation of this manual.

• Unplug the power supply cord before cleaning or storage.
• Do not immerse the unit in water, or place it close to water.
• Do not put the unit close to heat-generating devices or near flammable and dangerous materials.
• Never put your fingers or any stick-form objects into the air inlet or outlet grilles.
• Do not sit or stand on the unit.
• Discard water collected in the tank as instructed.
• Install and run the drainage hose downwards to make sure that condensed water can be drained continuously.
• Place and operate the unit on a stable and level floor.
• Do not spray or splash water directly onto the unit.
• Do not spray any pesticide nor flammable liquid onto the unit.
• Do not place any heavy objects or let children and pets sit on the unit.
• Do not operate dehumidifier in a small and confined space.
• When the power cord is damaged, it must be replaced by the qualified technician approved by our company.

Structure Description

Operation Instructions

Control Panel

Button Description

1. Power Button
   Press the power button to turn on/off the machine, the LCD screen will light up when in power-on status, otherwise it will be off.
   (Note: When the LCD screen is off, it doesn’t mean that the power is off.)

2. Up Button
   Set humidity value or timer setting increments.

3. Down Button
   Set humidity value or timer setting decrements.

4. Timing/Function Button
   Long press to enter the timer setting mode, short press to confirm the parameters settings.

Humidity Setting

• In power-on status, press “up”or “down” button once to set humidity value, “RH%” will light up and the large figure will flash to display the humidity value.
• In the humidity setting mode, you can set humidity value within the range of 10-98% RH.
• Press “Timer/Function” button once or no operation after seconds, it will exit the humidity setting mode automatically.

TIMER Setting

• This TIMER Setting function is designed for you to set a time to turn on ( when the machine is off) or turn off (when the machine is on) the machine automatically by the timer.
• In power-on/off status, long press ” TIMER ” button to enter timer setting mode, “H” and the “TIMER” icon will light up, and the small figure will flash to display the initial setting time as “00”.
• In “TIMER” setting mode, you can press “Up” or “Down” button to adjust the setting time within the range of 1-24 hours, which can be set again after invalid.
• When no TIMER setting, the small figure will display the current temperature. If you successfully set the “TIMER”, the small figure will display the remaining setting time, and if you press the “Timer/Function” then, you can check the current temperature again.

Action Description

• Power on: Compressor 1 starts after the fan has worked for a few seconds; compressor 2 starts after compressor 1 has worked for another few seconds.
• Power off: Compressor 1 and compressor 2 shuts down at once, and the fan will stop after a few seconds.
• The compressor features a “3 minutes delay protection function”, when the dehumidifier is powered, the compressor can only start after 3 minutes after its last shutdown.

Status Description

• When the machine is delayed, the “Running” character will flash, and if the fan is running, the running symbol “ ” will be on, otherwise it will be off.
• When the compressor is running, the dehumidification symbol “ ” will be on, otherwise it will be off.
• When the humidity has reached the setting value and dehumidification stops, the “Wet Controller” character will flash, indicating the wet control status.

Auto Defrost
When the dehumidifier is running at a lower temperature, the system will automatically determine whether there is a presence of frost. If any frost exists, it will defrost automatically.

• Defrost Action: The fan keeps running and the compressor stops.
• When Defosting: The “Defrosting” character or the “ ” icon will flash.
• When Defrosting Stops: The “Defrosting” character or the “ ” icon will go out, the fan and the compressor will both work according to dehumidification requirements.

Temperature Protection Function

• When the ambient temperature is higher than the Default Highest Temperature (113°F), the system will enter high-temperature protection, the small figure on the screen will indicate “HH”, and the compressor will stop.
• When the ambient temperature is lower than the Default Lowest Temperature (39 °F), the system will enter the low temperature protection, the small figure on the screen will indicate “LL”, and the whole machine will stop.

Drainage
The dehumidifier only drain through continuous drainage：

1. There is an a drainage hose included, which comes with the product in the package.
2. When using the drainage hose, please make sure the hose is placed downwards smoothly to drain out the water without being bent or knotted, this will cause a drainage problem.

Fault Code

Notes:

1. When E0, E1, E2, E4, EA or Eb occurs, the fan and compressor will not stop. The machine can still be restarted again after shut down (Press any button can stop the alarm.).
2. If the display screen reads the error code of E3, E5, E6, E8 or E9, you need to unplug the unit after troubleshooting and reconnect the power to release the alarm.
3. When Ec occurs, the machine operation will not be controlled by the control panel.

If the Error Code is still present, please don’t hesitate to contact Waykar Customer
Service email at support@waykar.com for help.

Common Troubleshooting

| |
---|---|---

Dehumidifier does not operate.

| 1.  Power failure.

2.  The power switch is not connected.

3.  The power plug is not plugged into the socket.

4.  The fuse has blown out.

5.  Machine failure prompt.

| 1.  Restore power.

2.  Turn on the switch

3.  Plug in the socket.

4.  Replace the fuse.

5. Check the error code, ask seller for help.

Dehumidifier operating, but room not dry.

| 1.  There is too much dust in the filter.

2.  The air inlet and outlet are obstructed.

3.  All doors, windows and other openings are open.

4.  Refrigerant leak.

|

1.  Clean the filter.

2.  Remove obstacles.

3.  Close the door and windows.

4. Ask seller for help.

Water reservoir leaking.

|

1.  The Machine is tilted

2.  Clogging of water drainage port.

| 1.  Adjust the machine to a horizontal position.

2.  Clean the dirt inside the port.

The dehumidifier makes à loud noise when operating.

| 1.  The machine is tilted, instead of upright as it should be.

2. The air filter is clogged.

|

1.  Place the machine levelly.

2.  Clean the filter.

When the above faults can not be ruled out, confirmed and repair is needed, please contact the seller at , do NOT disassemble t support@waykar.com he machine for repair without permission.

Special Notes

1. When using, please do not put the machine at the soft and uneven ground, avoid vibration and movement.
2. Do not insert thin rods and hard objects into the machine body to avoid malfunction and danger.
3. When using, please keep the machine away from heating furnace, electric kettle and other heat sources.
4. When using, please close doors and windows to achieve the best remove humidity effect.
5. Please do not put objects around the body. If the ventilation is blocked, the dehumidification effect will be affected.
6. If do not use the product for a long time, please unplug the power cord.
7. When cleaning the dehumidifier, please use the wet textile to wipe gently, do not shoot the water directly.
8. Please do not put any object on the dehumidifier.
9. Please clean the filter every two weeks (do not use hot water above 104°F, alcohol, gasoline or toluene.)
10. When continuous drainage, the drain hose must be placed horizontally, without unevenness and winding.

Technical Specifications

The working temperature of the machine normally ranges from 41°F to 100°F. If the room temperature exceeds this range, the machine will not work properly.
The company reserves the right to change the product, the above parameters are subject to change without notice.

WARNING
This product can expose you to chemicals including Styrene and its compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.

Cleaning & Maintenance

Maintenance
Before maintenance and cleaning of machine, please remove the power plug.
Do NOT clean the machine body with detergent, steel wool, chemically treated dust cloth, gasoline, benzene, thinner or other solvents. Because, it will damage the machine body.

Clean The Filter
This machine is equipped with a cleanable filter, which can remove most of the airborne dirt, such as dust, smoke, animal dander, mold spores and pollen, which reduicng allergens in the environment.
We recommend you to periodically check the filter, clean it once a month or before storage.

Take Out The Filter Net

1. Please use a vacuum cleaner to gently remove the dust from the surface of the filter.
2. If the filter is very dirty, clean it with warm water and mild detergent and dry it completely.
3. Put the filter back to the product.

Warranty

Waykar offers a 12-month warranty to all of our products together with the original proof of purchase when a defect occured, including those newly purchased and unused, from Waykar or through an authorized reseller, wholly or substantially, or as a result of faulty manufacturing parts, or workmanship during the Warranty Period. The warranty does not apply if damage is caused by other factors, including but without limitation of:

• Normal wear and tear;
• Abuse, mishandling, accident or failure to follow operating instructions;
• Exposure to liquid or infiltration of foreign particles;
• Servicing or modification of the product other than by Waykar.

There are our general terms for the warranty service, but we always encourage our customers to contact us if any issues, regardless of warranty terms. If you are experiencing an issue with Waykar product, you can reach out to us at support@waykar.com, we will dedicate our efforts to resolve it for you.

Extend Your Warranty by 1 Year
Register your product at www.waykar.com to extend your 1-year warranty by an additional year.

Please fill out all required fields and incude your Order ID, Date of Purchased if applicable.

Customer Support

If you have any questions or concerns about your product, please feel free to contact our expert support team. Waykar customer service is here to help.
Waykar Office
13211, Spring Street Baldwin Park, CA, US
Email: support@waykar.com
Live Chat: www.waykar.com

Support Hours
24 Hours available
*Please have your Order Number ready before contacting customer support.

For FAQs and more information please visit:
www.waykar.com

(Scan the QR Code for Live Chat)
We are expecting to see our products fulfill your life and hear your voice.
Your satisfaction means a lot to us.
Please tag us if you share a snap on your social media
www.waykar.com

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>