vtech PAW Patrol Chase to The Rescue Instruction Manual

: June 13, 2024
: vtech

Table of Contents

vtech PAW Patrol Chase to The Rescue
Product Information
Product Usage Instructions
INTRODUCTION
INCLUDED IN THE PACKAGE
GETTING STARTED
Battery Removal and Installation
RECHARGEABLE BATTERIES
PRODUCT FEATURES
ACTIVITIES
CARE & MAINTENANCE
TROUBLESHOOTING
FCC
CONSUMER SERVICES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

vtech PAW Patrol Chase to The Rescue

Product Information

The Chase to the Rescue toy is a fun and interactive toy that allows children to go on missions and help save Farmer Yumi’s barn, rescue Jake, and more. It features various tools such as the Pup Pad, net launcher, megaphone, and compass to aid in rescue missions. The toy also includes a Pup Pack, badge button, net launcher, megaphone, on/off/mode selector, compass, and pup pad. It is important to note that all packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords, and packaging screws are not part of the toy and should be discarded for the child’s safety. For battery installation, adult assembly is required. The toy operates on 2 AAA-sized alkaline batteries (not included). The AAA-sized batteries included in the unit are for demo purposes only and are not long-life batteries.

Product Usage Instructions

Unlock the Packaging Locks:
- Turn the packaging locks counterclockwise several times.
- Pull out the packaging locks and discard them.
Getting Started:
- Slide the On/Off/Mode Selector to start playing.
- Before playing for the first time, insert 2 new AAA-sized alkaline batteries.
Battery Removal and Installation:
Make sure the unit is turned Off.
Find the battery cover located on the back of the unit.
Use a screwdriver to loosen the screw and open the battery cover.
Remove old batteries by pulling up on one end of each battery.
Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box.
Replace the battery cover and tighten the screw to secure it.
Product Features:
On/Off/Mode Selector:

  * Slide the On/Off/Mode Selector to a mode position to turn the unit ON.
  * Choose from Mission mode or Learning mode by sliding the selector.
  * To turn the unit OFF, slide the switch to OFF.
2.  **Badge Button:**
  * In Learning mode, press the Badge Button to hear Chase tell you about himself, his favorite things, and catchphrases.
  * In Mission mode, press the Badge Button to play a question-and-answer game.
3.  **Collar Button:**
  * In Learning mode, press the Collar Button to hear Chase share his daily life with you.
  * In Mission mode, press the Collar Button to start a mission and choose the right tool for the job.
4.  **Rescue Tools:** Place the Megaphone, Net Launcher, Pup Pad, and Compass in Chase’s Pup Pack to hear him describe each tool and how it works.
5.  **Automatic Shut-Off:** To preserve battery life, the unit will automatically shut off after several minutes without input. The unit can be turned on again by pressing any button or sliding the mode selector. If the unit powers down or if the light fades out during play, please install a new set of batteries.

Activities: Learning Mode – Hear about Chase and his daily life. Chase tells you about his favorite things, catchphrases, tools, and rescue missions. You can place the rescue tools in Chase’s Pup Pack and learn how to finish the mission with the right tool.

INTRODUCTION

Thank you for purchasing the Chase to the Rescue toy. Go on missions to help save Farmer Yumi’s barn, rescue Jake, and more with your favorite pup! Use the Pup Pad, net launcher, megaphone, and compass to help save the day.

INCLUDED IN THE PACKAGE

Chase to the Rescue
Quick Start Guide

WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety.
NOTE: Please save this Instruction Manual as it contains important information.
WARNING: CHOKING HAZARD—Small parts. Not for children under 3 yrs.

Unlock the Packaging Locks

Turn the packaging locks counterclockwise several times.
Pull out the packaging locks and discard them.

GETTING STARTED

Slide the On/Off/Mode Selector to start playing. Before playing for the first time, please insert 2 new “AAA” sized alkaline batteries. (The “AAA” sized batteries included in the unit are for demo purposes only and are not long- life batteries.)

WARNING: Adult assembly is required for battery installation. Keep batteries out of reach of children.

Battery Removal and Installation

Make sure the unit is turned Off.
Find the battery cover located on the back of the unit, use a screwdriver to loosen the screw, and then open the battery cover.
Remove old batteries by pulling up on one end of each battery.
Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
Replace the battery cover and tighten the screw to secure it.

IMPORTANT: BATTERY INFORMATION

Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in a fire.

RECHARGEABLE BATTERIES

Remove rechargeable batteries (if removable) from the toy before charging.
Rechargeable batteries are only to be charged under adult supervision.
Do not charge non-rechargeable batteries.

PRODUCT FEATURES

On/Off/Mode Selector
Slide the On/Off/Mode Selector to a mode position to turn the unit ON. Choose from Mission mode [ ] or Learning mode [ ] by sliding the selector. To turn the unit OFF [ ], slide the switch to OFF [ ].
Badge Button
In Learning mode, press the Badge Button to hear Chase tell you about himself, his favorite things and catchphrases. In Mission mode, press the Badge Button to play a question-and-answer game.
Collar Button
In Learning mode, press the Collar Button to hear Chase share his daily life with you. In Mission mode, press the Collar Button to start a mission and choose the right tool for the job.
Rescue Tools
Place the Megaphone, Net Launcher, Pup Pad, and Compass in Chase’s Pup Pack to hear him describe each tool and how it works.
Automatic Shut-Off
To preserve battery life, the unit will automatically shut off after several minutes without input. The unit can be turned on again by pressing any button or sliding the mode selector.

NOTE
If the unit powers down or if the light fades out during play, please install a new set of batteries.

ACTIVITIES

Learning Mode
Hear about Chase and his daily life. Chase tells you about his favorite things, his catchphrases, his tools, and his rescue missions. You can place the rescue tools in Chase’s Pup Pack and learn how to finish the mission with the right tool.
Mission Mode
Go on a mission to finish Chase’s training or receive Ryder’s call from the Pup Pad and help save the day. Press the BadgeButton and Chase will ask you questions about himself and you can tell him the right answer. Press the Collar Button to start a rescue mission and choose the right tool for the job.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries if the unit will not be in use for an extended period of time.
Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

Turn the unit Off.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit On. The unit should now be ready to use again.
If the unit still does not work, install a new set of batteries.

IMPORTANT NOTE:
If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or go to our website vtechkids.com, and fill out our Contact Us form located under the Customer Support link. Creating and developing VTech products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

FCC

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information

Trade Name: VTech®
Model: 5631
Product Name: PAW Patrol Chase to the Rescue
Responsible Party: VTech Electronics North America, L.L.C.
Address: 1156 W. Shure Drive, Suite 200
Arlington Heights, IL 60004
Website: vtechkids.com.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
CAN ICES-003(B)/NMB-003(B)

CONSUMER SERVICES

Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.

Australian Customers:

Phone: 1800 862 155
Website: support.vtech.com.au.

NZ Customers:

Phone: 0800 400 785
Website: support.vtech.com.au.

PRODUCT WARRANTY/ CONSUMER GUARANTEES
Australian Customers: VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED – CONSUMER GUARANTEES Under the Australian Consumer Law, a number of consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees. for further information. Visit our website for more information about our products, downloads, resources, and more.