Lasko CD12950 Ceramic Heater with Remote Control Instruction Manual

Lasko CD12950 Ceramic Heater with Remote Control

Product Information

• Product Name: CD12950 Ceramic Heater with Remote Control
• Manufacturer: Lasko
• Model: CD12950
• Usage: Residential use only
• Country of Origin: China
• Printed Manual Revision: A 0523

Product Usage Instructions

1. Read and save the instructions provided in the manual.
2. Ensure that the heater is used in a residential setting only, and not in commercial, industrial, or agricultural settings.
3. Before using the heater, read all the instructions and warnings in the manual.
4. Ensure that all safety instructions and warnings are followed to reduce the risk of fire, electrical shock, injury, and hyperthermia.
5. If using the remote control, make sure it is operated within the recommended distance.
6. Replace all batteries of the remote control at the same time and clean the battery contacts before installation.
7. Ensure correct battery installation with regards to polarity (+ and -).
8. If the heater is not going to be used for an extended period of time, remove the batteries from the equipment.
9. Inspect the parts included in the package, which consist of 1 body and 1 remote control.
10. Familiarize yourself with the controls on the heater:
    • Power Button: Press to turn the heater ON/OFF.
    • Base Oscillation Button: Press to start/stop the base oscillation function.
    • Automatic Thermostat Button (+): Press to increase the desired room temperature.
    • Heat Mode Button: Adjust the heat to H3 (High), H2 (Medium), or H1 (Low).
    • Fan Mode Button: Adjust the fan to F2 (High) or F1 (Low).
    • Timer Button: Set the timer for up to 12 hours in 0.5-hour intervals up to 2 hours, and 1-hour increments from 2 hours to 12 hours.
    • Child Lock Button: Enable or disable the child lock function by pressing for 3 seconds. Child lock disables all functions except the Power Button.
    • Automatic Temperature Control: Operates in all heat modes, but not in fan modes.

Please refer to the manual for additional information and troubleshooting tips.

Register Your Product Today
You will benefit from:

Have a Question? Need a Part?
Please Do Not Return Product to Store!
Chat with us at www.lasko.com Monday-Friday 8am – 9pm EST (Valid in U.S. and Canada only)

READ AND SAVE THESE INSTRUCTIONS
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage!
This heater is for residential use only. It is not intended to be used in commercial, industrial or agricultural settings.

Read all instructions before using this Heater. Save these instructions

WARNING
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, these instructions and warnings should always be followed to reduce the risk of fi re, electrical shock, injury to persons and hyperthermia:
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS FOLLOW
THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:

• Plug heaters directly into a 120v wall outlet/receptacle only. Never use with an extension cord. Do not plug heater into any other cord connected device, such as a power strip, surge protector, multiple outlet adapter, cord reel or outlet-type air freshener. The use of such devices may create a fi re hazard. Do not plug multiple devices in the same outlet or on same circuit as heater.

• Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that heater plug fits tightly into outlet before each use. During use, check to make certain the heater plug is not overheating. If necessary have a qualified electrician check and/or replace the wall outlet. Do not use this heater with any solid state speed control devices.

• Make certain that the power source conforms to the electrical requirements of the heater.
  Extreme caution is necessary when any heater is used by or near children or invalids. The heater should not be left operating unattended. Never leave children unattended when the heater is on or plugged in.

• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fi t fully in the outlet, reverse the plug. If it still does not fi t, contact a qualified electrician. Do not attempt to defeat this safety feature.
  Do not use the heater in areas where gasoline, paint, or flammable liquids are used or stored. Do not use heater in locations where flammable or explosive chemicals are stored, or in wet atmospheres.

• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, or has been dropped or damaged in any manner. To disconnect heater, turn the heater off then remove the plug from the outlet.

• Always unplug heater when not in use. Unplug power cord before servicing or moving the heater.

• Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, fi re, or damage the heater. Do not block or tamper with the heater in any manner while it is in operation.

• Do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. Do not depend on the on/off switch as the sole means of disconnecting power when servicing or moving the heater. Always unplug the power cord.
  Hyperthermia can result in death. Symptoms of hyperthermia include high body temperature, headache, nausea, vomiting, tiredness, dizziness, fainting, and rapid pulse. If you

• begin to experience symptoms related to hyperthermia, turn off the heater and seek medical attention.

• To avoid excessive room temperatures which can cause hyperthermia: DO NOT leave product running unattended in a confined space around infants, or individuals with reduced physical, sensory, or mental capabilities.

CAUTION

• Always unplug heater when not in use. Unplug power cord before servicing or moving the heater.

• Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, fi re, or damage the heater. Do not block or tamper with the heater in any manner while it is in operation.

• Do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. Do not depend on the on/off switch as the sole means of disconnecting power when servicing or moving the heater. Always unplug the power cord.

• Always place the heater on a stable, fl at, level surface when operating, to avoid the chance of the heater overturning. Locate the power cord so the heater or other objects are not resting on it. Do not run power cord under carpeting. Do not cover power cord with throw rugs, runners, or similar coverings as this may cause cord to overheat. Arrange power cord away from room traffic and where
  it will not be tripped over.

• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 M) from the front of the heater and keep them at least 1 foot (0.3 M) from the sides and rear.

• This heater is not intended for use in wet or damp locations. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate a heater where it may fall into a bathtub or other water container.

• Do not use heater outdoors.

• This heater is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to national electric code (nec) article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings. This heater does not meet the requirements of nec article 547-7 (2008).

• This heater is not suitable for use in hazardous locations. Please refer to national electric code (nec) article 500 or applicable state or local codes or standards relating to electrical requirements for hazardous locations. This heater does not meet the requirements of nec article 500 (2008).

• Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this heater. If this occurs, move the heater to another location.

• Keep heater remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the heater.

REMOTE CONTROL:

• Install two “AAA” batteries (not included).
• Do not mix old and new batteries. Do not mix al ka line, standard (carbon-zinc) or rechargeable (nickel-cad mi um) batteries.
• Do not dispose of batteries in fi re. Batteries may explode or leak.
• Always purchase the correct size and grade of battery most suitable for the intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regards to polarity (+ and -).
• Remove batteries from equipment that is not to be used for an extended period of time.
• Remove used batteries promptly.

Parts Include

Control

*AUTOMATIC TEMPERATURE CONTROL
The automatic temperature function operates in all heat modes. Does not operate in fan modes.

1.  To set the room at a specific temperature press the Plus Temperature Control button or the Minus Temperature Control button to the desired temperature. The display will now reflect the set temperature and the temperature will be flashing. The heater is now in Auto Temperature Mode.
2. When you reach the temperature at which you want to set the unit, the set temperature will fl ash several times and then the display will return to indicate the current room temperature and will gradually change as the room temperature changes. NOTE: the temperature display does not indicate the temperature of the heated air being emitted by the heater.
3. Once the room temperature reaches 2 degrees above the set temperature, the heater will shut off . Once the room temperature reaches 1 degree below the set temperature, the heater will turn back on and continue to cycle off and on to maintain the set temperature.
4. This function will cancel if the Heat Mode button is pressed. The heater will now be in high or low depending on the selection and run continuously.

NOTE: It is normal for the heater “fan” to run for approximately 15 seconds when the heater shuts off after reaching the set temperature. Press the plus button and minus button at the same time to change the display to ° Celsius. Press the same two buttons together again to change the display back to ° Fahrenheit.

MAINTENANCE

• Always unplug the cord before moving, servicing or cleaning.
• Never place the heater in or near water.
• Clean the heater only with a vacuum equipped with a brush attachment; the vacuum will remove the lint and dirt from inside the heater.
• Vacuum intake grills every two weeks; this will help to maintain the optimum heater performance.
• Never attempt to take apart the heater.
• Clean the body of the heater with a soft cloth only.
• Never use alcohol or solvents such as gasoline, benzene, paint thinner, or other harsh cleaners.

TROUBLESHOOTING TIPS

If your heater fails to operate, see below for a list of probable causes and solutions:

• Be sure the power cord is plugged into a working electrical outlet.
• Check your temperature setting. The heater may be off because it has reached the desired temperature setting.
• If your heater runs for several minutes and shuts off repeatedly, your heater may require cleaning. See maintenance section above. STORAGE: Store the heater with these instructions, in the original carton in a cool, dry place.
  LUBRICATION: Motor is permanently lubricated. No maintenance is required.

DISPOSITION: Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local waste service provider or visit www.1800recycling.com®

SAFETY FEATURE

• A Tip-Over switch is built in to prevent operation if the heater is tipped over.
• A thermal overload protector is built in to prevent overheating.
• If an overheat temperature is reached, the heater will automatically shut off. It can only resume operation when the user resets the unit.

To Reset Heater:

• Unplug the heater and wait 10 minutes for the heater to cool down.
• After the heater has cooled down, plug the unit into a 120V~ electrical outlet and follow the
• operation instructions described in this manual.

LASKO PRODUCTS, LLC LIMITED WARRANTY (VALID IN U.S. AND CANADA ONLY)

What this warranty covers: This product is warranted against defects in workmanship and/or materials.
How long this warranty lasts: This warranty extends only to the original purchaser of the product and lasts for three (3) years from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
What Lasko will do: During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same or comparable model. For all warranty claims, the product must be returned to Lasko Products, LLC
at customer’s expense with proof of purchase within the warranty period. Contact the Lasko customer service department to obtain a Return
Authorization (“RA”) Do not return products without an RA or the warranty claim will not be processed.

What this warranty does not cover: This warranty does not apply if the product was damaged or failed because of accident, improper handling or operation, shipping damage, abuse, misuse, or unauthorized repairs made or attempted. This warranty does not cover shipping costs for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.
Any and all warranties, expressed or implied (including, without limitation, any implied warranty of merchantability), last three years from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs and in no event shall lasko’s liability under any express or implied warranty include (i) incidental or consequential damages from any cause whatsoever, or (ii) replacementor repair of any house fuses, circuit breakers or receptacles. Notwithstanding anything to the contrary, in no event shall lasko’s liability under any express or implied warranty exceed the purchase price of the product and any such liability shall terminate upon the expiration of the warranty period.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province.
Proof of purchase is required before a warranty claim will be accepted.

CUSTOMER SERVICE:
Email: producthelp@lasko.com.
Web: www.lasko.com
Our Customer Service team is available to assist you with product service questions and replacement parts. They can be reached Monday through
Friday, 8am-9pm Eastern. Please have your model number available, as well as the type and style (located on the underside of your product).
Customer Service Dept.,
820 Lincoln Ave., West Chester, PA 19380
(Please do not send product to this location)
Manual printed in China

References

• Search. Find. Recycle - RecycleNation
• Lasko, GermGuardian, B-Air, BlueDri | Fans, Heaters, Air Purifiers – GuardianTechnologies

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>