JBL B0BQQC7MSM Endurance Peak 3 Headphones User Guide
- June 13, 2024
- JBL
Table of Contents
B0BQQC7MSM Endurance Peak 3 Headphones
quick start guide
WHAT’S IN THE BOX
https://register.jbl.com.utm_medium=US&utm_source=QSG
APP
JBL Headphones
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH
THIS FREE
APP.https://storage.lscloud.harman.com/Testing/MyJBLHeadphones/QRCodeDownload/appstore/jblheadphone.html
How to wear
-
ATTACH ear tips and ENHANCERS
Mix and match for a perfect fit and audio performance
-
TWISTLOCK™ Technology
First time use
power on & connect
power on & connect
DUAL CONNECT
CONTROLS
* Enable advance controls by connecting your JBL
ENDURANCE PEAK3 to JBL Headphones App .
** ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO
YOUR PREFERRED EARBUD (L/R).
VOICEAWARE
POWER OFF
MANUAL SETUP
DO MORE WITH THE APP
Charging
WATERPROOF & DUSTPROOF IP68
Led behaviors
TECH SPEC
| Model: | ENDURANCE PEAK3 |
|---|---|
| Driver size: | 10 mm/ 0.39″ Dynamic Driver |
| Power supply: | 5 V 1 A |
| Earbud: | 12.5 g per pc (25 g combined)/0.0275 lbs per pc (0.055 lbs combined) |
| Charging case: | 76 g/ 0.167 lbs |
| Earbud battery type: | Lithium-ion polymer (70 mAh/ 3.85 V) |
| Charging case battery type: | Lithium-ion polymer (950 mAh/ 3.7 V) |
| Charging time: | 2 hrs from empty |
| Talk time: | 5.5 hrs |
| Music playtime with BT on: | up to 10 hrs |
| Frequency response: | 20 Hz – 20 kHz |
| Impedance: | 16 ohm |
| Sensitivity: | 102 dB SPL@1 kHz |
| Maximum SPL: | 93 dB |
| Microphone sensitivity: | -38 dBV/Pa@1 kHz |
| Bluetooth version: | 5.2 |
| Bluetooth profile version: | A2DP V1.3, AVRCP V1.6, HFP V1.7 |
| Bluetooth transmitter frequency range: | 2.400 GHz – 2.4835 GHz |
| Bluetooth transmitter power: | < 14 dBm |
| Bluetooth transmitter modulation: | GFSK, π/4 QPSK, 8DPSK |
| Maximum operation temperature: | 45 °C |
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS.
BATTERY LIFE VARIES BY USE AND SETTINGS.
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY. DO NOT
SHORT CIRCUIT . MAY EXPLODE IF DISPOSED OF IN FIRE . RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN INCORRECT TYPE . DISPOSE OR RECYCLE USED BATTERIES
ACCORDING TO THE INSTRUCTIONS
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLENPEAK3) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.99 W / kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user’s
head and the back of the headset. The use of belt clips, holsters and similar
accessories shall not contain metal parts in its assembly. Use of accessories
that do not meet these requirements may not comply with IC RF exposure
requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC: 6132A-JBLENPEAK3 This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Google,
Android and Google Play are trademarks of Google LLC.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such arks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names
are those of their respective owners. 