MUDIX S2 1080P Video Projector User Manual

MUDIX 1080P Video Projector
Model: S2

Shenzhen Hifun Technology Co.,Ltd
Address: No.12, Longshan Road, Luotian Community, Yanluo Street, Baoan District, Shenzhen China

S2 1080P Video Projector

Before using this product, please read the user manual carefully and keep it for future reference Scan the QR code for more details

• Please scan the QR code via phone or visit https://mudix.afterservice.vip to REGISTER and EXTEND warranty.
• Defective item received or issues with product, please scan the QR code via phone or visit https://mudix.afterservice.vip to contact our 7/24 after service team.
• Any questions, advice or product issues, please send e-mail to mudix-@afterservice.vip.

Get 24/7 Assistance at

https://mudix.afterservice.vip?utm_source=card&utm_medium=qrcode
Use camera or QR scanner to scan
Or visit: https://mudix.afterservice.vip

IMPORTANT SAFETY INSTRUCTIONS

• Please read and understand all instructions before using this device.
• Don’t change any settings that are not described in this manual.
• Warranty does not apply if personal injury, data loss, or damage occurs as a result of failure to follow instructions.

Warnings

• To reduce the risk of fire or electric shock, do not expose the device to rain or moisture. Objects filled with liquids, such as vases, should not be placed on the device.

• To prevent overheating, do not block or clog the ventilation openings.

• To avoid device damage or fire explosions, the air inlet/outlet/lens should be well ventilated when the projector is working.

• Never place the device in a confined space. Always leave enough space around the device for ventilation.

• Keep minimum (19.68 inch) space around the appliance for optimal ventilation.

• Do not place the device in areas susceptible to excessive dust and dirt or near any appliance generating a strong magnetic field.

• Protect the device against direct sunlight heat, large temperature fluctuations, and moisture.

• When the device runs for a long time and the surface becomes hot, shut it down and unplug the power cord. Resume operation only after the device has cooled.

• Always handle the device with care. Avoid touching the lens.

• Never place heavy or sharp objects on the device or the power cord.

• To avoid electric shock, do not disassemble the projector by yourself.

• Only use attachments or accessories specified by the manufacturer.

• Avoid extreme vibration. It may damage the internal components.

• Do not put any hazards into the accessories.

• Do not use the projector in the following cases or it may pollute optical elements, reduce product life, and the projection image will be dark:
  – Wet, dusty, smoky places.
  – Places where the temperature is above 104°F.

• A layer of moisture will form inside the device to cause a malfunction in the following cases:
  – If the device is moved from a cold place to a warm place.
  – After a cold room is heated.
  – When the device is placed in a damp room, please seal the device in a plastic bag to avoid moisture.

• To avoid hearing damage, do not listen for extended periods at high volume. Set the volume at a safe level.

• Do not allow children to handle the device without supervision.

Power Supply

• Power off the device before removing the power supply from the socket.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from this device.
• Unplug this device if there are lightning storms or when unused for a long time.
• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Before you make or change any connections, ensure that all devices are disconnected from the power outlet.
• Never touch the power cable or the power connection with wet hands.

SAFETY NOTICE

PACKAGE CONTENTS

• Projector
• User Manual
• Remote Control
• Power Adapter
• Power Cord
• HD Cable
• AV Cable
• Tripod Stand

PROJECTOR COMPONENTS & FUNCTIONS

PROJECTOR COMPONENTS & FUNCTIONS

REMOTE CONTROL BUTTONS

| Power| | OK
---|---|---|---
| Source| | Volume –
| Mute| | Volume +
| Up| | Menu
| Down| | Return
| Left| | Flip
| Right| |

EQUIPMENT CONNECTION

INSTALLATION & ADJUSTING

1. Placement
   Place projector on a flat, stable foundation squarely in front of the projection surface.
   For best results, the projection surface shall be white and flat.
   The distance between this projector and the projection surface must be a minimum of 1.2 meters (47 inches).

2. Adjust The Focus
   Rotate the focus ring to adjust the focus of image.
   

3. Projection Distance Reference
   The distance between this projector and the projection surface determines the approximate size of the image.
   

Projection size (inch)| Projection size
(H*W) (inch)| Projection distance (inch)
---|---|---
36| (H)18.5| (W)31.49| 43.4
56| (H)29.5| (W)52.36| 66.9
66| (H)34.25| (W)61.02| 78.74
86| (H)41.33| (W)73.22| 98.4
96| (H)47.24| (W)44.48| 110.2
116| (H)58.66| (W)104.72| 133.8
4. Power On/Off

Power on

1. Connect this projector to an electrical outlet by using the provided power cord and adapter.
2. Remove the lens cover.
3. Press the Power button on the projector to power on. Then turn this projector towards a flat, white projection surface.

Power off
Power off the device before removing the power supply from the socket.
Attach the lens cover and store the projector in a cool dry place.

HOME PAGE

To play from HD playback devices, select “HD” and press “Enter”.
To play from AV playback devices, select “AV” and press “Enter”.
This projector can be connected to various HD playback devices such as a TV box, TV stick, DVD player, set-top box (STB), gaming console, or other devices. To play from HD playback devices, connect this projector to an HD playback device with an HD cable.
To play from a USB drive, select “Movie” or “Music” or “Photo” and press “Enter”.

To play from a USB drive:

1. Insert a USB drive into the USB socket;
2. Select “Movie” or “Music” or “Photo” and press “Enter” on the Homepage;
3. Select a file, then press “Enter”, this projector will play the video or music, or display the photo you selected.

After entering “Movie”, only videos are supported.
After entering “Photo”, only pictures are supported.
After entering “Music”, only music is supported.

WIRED MIRRORING

Only for iOS devices:

1. Select “Screen Mirroring” on the home page with the remote control, and select “OK”;
2. Select “iOS Screen” and select “OK”;
3. Connect the iOS device and the projector with a USB cable and go to the USB media interface. Pay attention to inserting into the USB port that supports Airplay.
4. Select “Trust” on the iOS device and select the screen mirroring function in the control panel.
5. Choose the corresponding projector to begin screen mirroring.

WIRELESS MIRRORING

Due to the continuous improvement of the design, the software interface may be slightly different from the one shown in this figure, please refer to the actual product.
(Note: Android devices must have built-in Wireless Projection / Multi-Screen function.)

Note:

• For specific operations, please refer to the actual user interface of your device.
• After entering “Screen Mirroring”, press the “Source” button on the remote control, then select “Media” to return to the homepage.

TO PLAY FROM EXTERNAL DEVICES

• Use a 0.137 inch audio cable (not provided) to connect your headphones or external speakers;
• Connect the other end of the audio cable to the audio out port on this projector;
• You will hear audio from external devices;
• When connected to external speakers, the built-in speaker system is disabled.

CLEANING

• Power off the device and remove it from the power supply before cleaning the surface.
• Use a soft, lint-free cloth. Never use liquid, gaseous, or easily flammable cleansers (like sprays, abrasives, polishes, and alcohol).
• Do not use any liquid cleaning agents to clean the lens as they may damage the protective coating on the lens.
• Wipe the surfaces gently. Be careful that you do not scratch the surfaces.
• Use lens clean paper to clean the lens of this projector.

REPAIR

• Do not make any repairs for the device yourself.
• Improper maintenance can result in injuries or damage to the device.
• Refer all servicing to qualified service personnel.

SPECIFICATIONS

Light source: LED
Speaker drivers: 5W
Power consumption: 65W
Resolution: 19201080P Native
Display technology: 3.97 inch LCD
Dimensions: 7.25.3*7.6 inch
Weight: 2.8lb
Power supply: AC 110-240V/DC 19V@3.5A
Remote control batteries: 2 AAA batteries (not included)
Accessories: User Manual, Remote Control, HD Cable, Power Adapter, Power Cord, AV Cable, Tripod Stand.

FAQ

Display available, the audio does not work?

The audio decoding format is not supported or exceeds the decoding capability range.

Audio available, the display does not work?

The video decoding format is not supported or exceeds the decoding capability range.

No signal in the screen?

The projector does not identify the device which is connected.

Why is the image blurry?

Please adjust the focus ring.

How to connect Wi-Fi?

How can I connect my smart phone? How to use screen mirroring?

See method below.

What should I do if the image is up side down?

Press the Flip button on the remote control.

What should I do if the remote control is unresponsive?

Check if there are batteries in remote control; Check if the batteries are completely drained; Check if the projector is powered on.

Shadow on the screen or smoke from the device?

Powered off immediately; It is caused by the poor cooling of the projector; How to avoid: Please do not block the air outlet of the projector, It would cause poor cooling issue.

Why does the projector shut off when using?

Please do not block the air outlet of the projector, it would cause poor cooling issue. The device will automatically shut off to protect the projector when the temperature is too high.

What should I do if there are small spots on the projected screen?

Dust on the display screen cause small spots. To avoid this issue, do not use the device in dusty or smoky environment.

Is 3D effect supported?

Not supported.

Can I display slides with this projector?

Yes, only when using HD devices.

Why does the external storage not working, especially large capacity hard disk?

The projector can support hard disks up to 1TB. The 3.5-inch hard disk requires an external power supply to the projector. The 2.5-inch hard disk does not need an external power supply.

What type of external drives are supported in USB mode?

FAT32 and NTFS are supported for U disk and TF card, while exFAT is not supported. If your USB drive is not recognized, you can format it to FAT32 or NTFS on a PC, then re-connect it to the projector.

• Please scan the QR code via phone or visit https://mudix.afterservice.vip to REGISTER and EXTEND warranty.
• Defective item received or issues with product, please scan the QR code via phone or visit https://mudix.afterservice.vip to contact our 7/24 after service team.
• Any questions, advice or product issues, please send e-mail to mudix@afterservice.vip.

For more information, scan here to contact us
Get 24/7 Assistance at

https://mudix.afterservice.vip?utm_source=card&utm_medium=qrcode

Use camera or QR scanner to scan
Or Visit: https://mudix.afterservice.vip

References

• afterservice.vip

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>