BYOD ApeosPrint 4830 Printing Setup Instruction Manual
- June 13, 2024
- BYOD
Table of Contents
BYOD Printing Setup Instructions
User’s Manual
(iOS Version)
Version 1.1
September 7, 2023
Introduction.
1.1. Purpose of this Document
The following is a description of the operating procedures for BYOD printing
settings on bring-yourown devices for the replacement of the education and
research system in the 2023 school year.
1.2. Assumption
The premise of this procedure is as follows
- This procedure is intended for those who perform BYOD printing on bring-your-own devices.
- These instructions are based on iOS 16.6.
- Please connect the device to the campus network. Please refer to the setup manual on the Organization for Information Strategies’ website for the procedure to connect the device to the campus network.
- Please note that printing on a bring-your-own device is intended for personal use; if a single device is used by multiple people sharing an account, the print points of the user who set up printing will be consumed.
- Please prepare a smartphone or PC that can read the QR code.
- Please output paper within 1 day after printing is executed on the brought-in device. 1 day will cause the job to be deleted. If the job is deleted, no print points will be consumed.
- The device that performs the printing and the device that reads the QR code are two different devices, no problem.
Printing Setup Procedure
For iOS, no prior printer setup is required.
Please check in the next section.
Printed from
- Select the file you wish to print and print. On the printer selection screen, “BYOD-Color” or “BYOD-Mono” will be displayed. Select “BYOD-Mono” if the output printer is a monochrome printer, or “BYOD-Color” if the output printer is a color printer.
If the following screen appears, enter your User ID (the ID you use to log in to your campus PC) and password in the “username” and “password” fields, then click the “OK” button.
Output Method
-
Read the QR code on the printer with a QR code reading application such as a smartphone or PC.
Monochrome printer QR code| Color Printer QR Code
---|---
|
|
[ https://webprint.kwansei.ac.jp/mr/U3IM07CP01s](https://webprint.kwansei.ac.jp/mr/U3IM07CP01s) - Access the web page displayed by the QR code, enter your User ID and password in the “Username” and “Password” fields, and tap the button. (If you check the “Remember me” checkbox, you can skip entering the password next time.)
- After logging in, a list of jobs that have been sent in advance will appear on the screen. Check the jobs you want to print and tap to print them. Tap ” ” to delete the job. No print points are consumed at this time.
- Tap “OK” when the message appears.
- tap in the lower left corner of the screen to log out of the print screen.
BYOD Printing Setup Instructions (iOS)
Updated: 09/07/2023 Created: 09/01/2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>