Thermex Carbon and HEPA Filter Instruction Manual

: August 29, 2024
: thermex

Table of Contents

Thermex Carbon and HEPA Filter
Product Information
Product Usage Instructions
SAFETY WARNINGS
INSTALLATION
REPLACEMENT OF FILTERS
CLEANING AND MAINTENANCE
SERVICE
ENVIRONMENTAL CONSIDERATIONS
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Thermex Carbon and HEPA Filter

Product Information

The Thermex Carbon & Hepa Filter is designed to filter the air from the cooker hood, providing efficient filtration to maintain a clean and healthy kitchen environment. It is essential to follow proper installation and maintenance procedures to ensure optimal performance and longevity of the filter.

Specifications:

Brand: Thermex
Product: Carbon & Hepa Filter
Model Number: M 535211000906052024

Product Usage Instructions

Proper Use:

Use the filter only for its intended purpose of filtering air from the cooker hood.
Avoid using unauthorized parts or making modifications that can impact filtration efficiency.
Always use original Thermex parts and accessories for best results.

Correct Installation:

Installation should be done by a qualified technician familiar with the cooker hood specifications.
Follow all installation instructions carefully to ensure effective filtration and safety.
Disconnect power before installation to prevent electric shock.

Regular Maintenance:

Regularly clean and replace the filter according to manufacturer recommendations.
Ignoring maintenance can lead to reduced filtration efficiency and performance.

FAQ:

Q: What should I do if I notice a decrease in filtration efficiency?
A: If you experience a drop in filtration efficiency, check the filter for dirt buildup and follow the cleaning instructions provided by the manufacturer. Regular maintenance is crucial for optimal performance.
Q: Can I use non-Thermex parts with the Carbon & Hepa Filter?
A: It is recommended to only use original Thermex parts and accessories with the filter to ensure proper functioning and maintain warranty coverage.

SAFETY WARNINGS

Proper Use:

Ensure to use the Thermex Carbon & Hepa Filter ﬁlter only for the speciﬁc purpose it is designed for, which is to ﬁlter the air from the cooker hood. Any other use of the ﬁlter may result in ineffective ﬁltra-tion or damage to the cooker hood.
Avoid placing objects or materials not approved by the manufacturer near the ﬁlter. Unauthorized items may interfere with ﬁltration and cause damage to the cooker hood. Always use only original Thermex parts and accessories to ensure optimal performance.

Correct Installation:

The installation of the Thermex Carbon & Hepa Filter ﬁlter should only be carried out by a qualiﬁed technician familiar with the speciﬁca-tions and installation instructions of the cooker hood. Improper installation may result in ineffective ﬁltration and potential safety hazards.
Before beginning the installation, ensure to disconnect the power to the cooker hood and follow all safety precautions in the installation instructions. This will minimize the risk of electric shock or damage during installation.

Voiding of Warranty:

Any damage to the Thermex Carbon & Hepa Filter ﬁlter due to incor-rect use, installation, maintenance, or cleaning will result in voiding the warranty. It is crucial to follow all manufacturer recommendations and instructions to avoid this situation.
The use of unauthorized parts or making unauthorized modiﬁcations to the ﬁlter will also result in voiding the warranty. To ensure coverage during the warranty period, only original Thermex parts and accessories should be used.

Regular Maintenance:

To maintain optimal performance and lifespan of the Thermex Car-bon & Hepa Filter ﬁlter, regular maintenance is essential. This includes cleaning and replacing the ﬁlter according to the manufacturer’s recommendations.
Ignoring maintenance instructions can lead to dirt buildup and loss of ﬁltration efficiency, which may affect the air quality in the kitchen and result in reduced performance of the cooker hood.

INSTALLATION

The cooker hood used in the illustration here is an exam-ple of installation. The overall guidelines for installation are the same, regardless of which cooker hood the ﬁlter is mounted on.

Pic 1:
- Remove the cooker hood’s duct and prepare so that the exhaust hole (Ø150 mm) is easily accessible and ready for mounting.
- Center and place the ﬁlter over the cooker hood’s exhaust, as shown in the illustration.
Pic 2:
Tighten the clamp so that the ﬁlter seals tightly around the cooker hood’s exhaust hole. NOTE: Tighten ONLY the clamp so that it just closes tightly around the exhaust hole.
Pic 3:
Reposition the cooker hood’s exhaust duct, and ensure that the exhaust holes are clear so that the recirculated air is blown back into the kitchen.
Pic 4:
The cooker hood is now ready for use, and the air is now recirculated after cleaning the Carbon & Hepa Filter ﬁlter.

REPLACEMENT OF FILTERS

The carbon ﬁlter and the HEPA ﬁlter should be replaced regularly, as over time the ﬁlters become less effective and the activat-ed carbon loses its effectiveness.
It is recommended to replace the ﬁlters in Carbon & Hepa Filter at least once a year to ensure continued effective ﬁltration. The frequency of replacement may vary depending on usage patterns.
Pic 5 & 6:
Remove the protective grille in front of the ﬁlters, as shown in the illustration, by pressing the clip.
Pic 7:
Remove the used carbon ﬁlter and HEPA ﬁlter, and replace them with new ﬁlters. The ﬁlters can be purchased from Thermex. NOTE: Always use original parts to ensure optimal operation and avoid damage.
Pic 8:
Reattach the protective grille, ensuring it is properly secured and sealed. The unit is now ready for use.

CLEANING AND MAINTENANCE

Regular Cleaning:
To maintain optimal performance, the Thermex Carbon & Hepa Filter filter should be cleaned regularly. Remove visible dirt and dust by gently wiping the filter surfaces with a soft, dry cloth.
Filter Replacement:
It is recommended to replace the filters at least once a year to ensure continued effective filtration. The frequency of replacement may vary depending on the usage pattern. Use only original Thermex filters for replacement to ensure optimal performance and compliance with product specifications. The use of unauthorized filters may degrade filtration effectiveness and result in warranty voidance.
Disposal of Used Filters:
Used Carbon & Hepa Filter filters should be disposed of by local waste disposal regulations and environmental regulations. Be sure to follow the recommendations of local authorities for proper disposal of the filters.

SERVICE

Before reporting service on your Thermex range hood, you must read the installation and/or user instructions carefully. It ensures that Thermex can provide you with the best possible assistance.

The service department at Thermex can be contacted in preparation to:
- Technical support for installation and installation of your range hood.
- Clariﬁcation of functionalities in your hood.
- Service Request during the warranty on your hood.
Before a service request during the warranty always try to disconnect the power to the hood for about 5 min. Then plug the power back on to see if the problem is corrected.
If the problem is not corrected, disconnect the power supply to the hood for one hour. If the hood is still not functioning properly, and the troubleshooting charts are reviewed, contact the service department.
NOTE: For inquiries within the warranty, you will be asked for proof of your purchase in the form of a sales receipt. Therefore, always store your sales receipt
Before the request for service within the warranty, it is important to have all the necessary information ready:
- Error Description
- Model
- The type and serial number of the hood (on the chassis plate)
- Information of purchase

ENVIRONMENTAL CONSIDERATIONS

PACKAGING
The packaging must be disposed of under local regulations on waste management.

SCRAPPING OF THE PRODUCT
The symbol on the product or accompanying documentation indicates that this product may not be disposed of as household waste but must be delivered to the nearest collection center for the recycling of electrical and electronic equipment.