SHARPER IMAGE EM9926B Wireless Charger User Manual
- July 3, 2024
- Sharper Image
Table of Contents
EM9926B
User Manuals
EM9926B Wireless Charger
Attentions
▶ Please use the original or manufacturer specified attachments or
accessories.
▶ Please do not disassemble products, so as not to cause trouble or safety
hazards
▶ Do not use this product in the place near the water source, do not place
this product in the damp place
▶ Due to improper use of product damage, odor, smoke and other phenomena,
please immediately terminate the use, and send to professional maintenance
personnel
▶ Do not place the product in a strong electromagnetic wave, strong static
electricity and easy condensation
▶ Please do not place the magnetic stripe card (including credit card,
telephone card, bank card, boarding card, etc.) near the product, Otherwise,
it will be damaged by the magnetic field
▶ If you use a wireless charger in an area with weak network signals, your
mobile device may not be able to receive the network
▶ Do not place metal, magnet, magnetic stripe card and other foreign matters
between the mobile device and the wireless charger, otherwise, the mobile
device will not charge normally or be damaged due to overheating
▶ If a thick protective shell is installed for the mobile device, the wireless
charging may not work properly. If the cover is thick, remove it, and then put
the mobile device on the wireless charger for charging
Main features
▶ Smart home wireless charger charge any equipment that accord with QI
wireless charging standard
▶ Wireless charging output: MAX.10W
▶ USB socket can charge for mobile device (5V1.0A)
▶ High definition and super large digital LCD screen time display
▶ Perpetual Calendar Up to Year 2099
▶ Time format in optional 12/24 HR
▶ Day of week in 7 languages
▶ Mood light can be adjustment in 3 modes or OFF
▶ LCD backlight brightness can be adjustment in 3 gears or OFF
▶ Daily Alarm clock and snooze function
▶ Low battery indicate
▶ 433.92MHz wireless outdoor temperature and humidity sensor
▶ Wireless transmission distance greater than 60 meters in an open area
▶ Temperature unit in optional °C /°F
▶ INDOOR temperature measurement ranges: -9.9°C (14.2°F) ~ 50°C (122°F)
Humidity measurement ranges: 20-95%
▶ OUTDOOR temperature measurement ranges: -40°C (-40°F) ~ 70°C (158°F)
Humidity measurement ranges: 20-95%
▶ Air pressure measurement ranges: 850~1100 hPa/mB
▶ Daily maximum / minimum temperature and humidity record and query
▶ Weather forecasting function
▶ Power Supply:
Weather station: 2 x LR03 AAA size 1.5V
Remote sensor: 2 x LR06 AA size 1.5V
Adapter：DC9V2000mA
Appearance description
A：Trend of pressure
B：Weather forecast pattern
C：【Backlight /snooze】button
D：Pressure
E：Day of week
F：INDOOR temperature
G：OUTDOOR temperature
H：Low battery indicator of remote sensor
I：OUTDOOR humidity
J：Time
K：Low battery indicator of weather station| L: INDOOR humidity
M: Date
N: INDOOR sensor
O: 【SET】 button
P: 【CH】button
Q: 【MEM】button
R: 【DOWN】button
S: 【UP】button
T: Alarm ON/OFF switch
U: 【ALARM】button
V: Battery compartment cover
---|---
- Wireless Charging status indicator
- Mood light emitting area
- Antiskid pad of mobile device wireless charger
- Touch button of mood light
- Weather station DC power supply terminals
- Place area of DC power supply to weather station
- Adapter DC input socket
- USB charging socket of 5V1.0A
A1: Remote sensor temperature
A2: Emission symbols
A3: Channel number
A4: Remote sensor humidity
A5: Remote sensor low battery indicate
B1: °C /°F unit transfer button
B2: Manual transmitter button
B3: Channel switch
C1: Transmit indicating lamp
C2: Battery compartment cover
C3: Wall mounting hole
C4: Stand cover
C5: Battery compartment
Initial operation
▶ Open the weather station battery compartment cover , Install 2 x AAA
batteries correctly and pay attention to the positive and negative directions.
▶ When you insert the batteries, the all icon on the LCD will light up for 3
seconds, and you will hear a beep tone, then detect indoor temperature
/humidity and pressure
▶ The Weather Station will now start to make a connection to the outdoor
remote sensor. This operation takes about 3 minutes and will display by a
flashing reception RF signal symbol in the “OUTDOOR” display area on the
receiver.
▶ This now, Open the remote Sensor battery compartment cover , Toggle the
switch to select the channel you want，Insert 2 x AA batteries with correct
polarity 【“+” and “–“ marks】.
▶ After receiver has created a connection to the outdoor remote sensor,
Pairing mode will exit after 3 minutes.
▶ Inserting the adapter DC plug into the product power socket , plug the AC
input of the adapter into the mains socket of electricity.
▶ After the base is powered on, you can see that the mood light will go out
after a demonstration.
▶ Warning: do not use metal and other conductive objects to contact two
power supply terminals at the same time.
▶ After placing the weather station in the designated position on the base,
the weather station will be powered from the DC terminal of the base.
▶ Warning: There is a magnetic field in the DC terminal power supply area
of the base.
Please do not put the magnetic stripe card (including credit card, telephone
card, bank card, boarding card, etc.) on it.
Clock settings
▶ Press and hold the【SET】button for 2 seconds, the 24/12Hr start to flash, and
press【UP】or【DOWN】buttons to set the timing format you need.
▶ Press the【SET】button to confirm the item has been set and go to the next
one, the sequence of setting items is as follows: 12/24Hr HOUR MINUTE Format o
f DATE (D/M or M/D) YEAR MONTH DATE Language of week Pattern of weather
forecast Unit of pressure Value of pressure
▶ When adjusting the value, press and hold the 【UP】or【DOWN】 button to adjust
quickly.
▶ Press 【SET】button to confirm the last item to end the setting procedures,
then it will return to the normal mode.
▶ When choosing the 12Hr format, if “PM” is displayed before the hours, it
means that the hour is post meridiem.
▶ The 7 languages that show week abbreviations are listed below:
F.Y.I.:
▶ If there is no valid operation within 20 seconds, it will automatically
return to normal time mode from the set mode.
Daily alarm settings
▶ Push the ALARM switch to the “ON” position, The LCD display the “ ” icon,
the alarm function is ON, Push the “ALARM” switch to the “OFF” position, the “
” icon will disappears from the display, the alarm function is OF F.
▶ Press【ALARM】button U once, the time will switch to the alarm time
display for 5 seconds.
▶ Press and hold【ALARM】button for 2 seconds, the hours of the ALARM time
starts to flash, and press【UP】or 【DOWN】buttons to set the required HOUR, hold
the【UP】or【DOWN】buttons for 2 seconds can be adjusted quickly.
▶ Press【ALARM】button to confirm the item has been set and go to the next one,
the sequence of setting items is as follows: Alarm HOUR Alarm MINUTE
▶ Press【ALARM】button to confirm your setting and to end the setting procedure.
▶ The alarm will sound for 2 minutes if you do not deactivate it by pressing
any button. In this case the alarm will be repeated automatically after 24
hours.
▶ When the alarm is ringing, press any buttons except【SNOOZE】 to stop the
alarm signal, applicable to the day when the alarm does not need to be
reactivated, it will ring again this time next day.
▶ When the alarm is ringing, press the button【SNOOZE】the alarm mode will to
get to snooze mode. The alarm signal sounds again after 8 minutes.
F.Y.I.:
▶ If there is no valid operation within 20 seconds, it will automatically
return to normal time mode from the alarm time set mode.
Backlight brightness settings
▶ When the base is powered by the adapter and the weather station is correctly
placed at the DC terminal power supply position, the backlight will always be
on. Press the 【BACKLIGHT】 button to adjust the brightness level of the
backlight.
▶ When the weather station leaves the base and is powered by battery, press
the 【BACKLIGHT】button once and the backlight will be on for 15 seconds.
Temperature unit switch
▶ Press the【UP】button to switch the temperature unit in ℃ or ℉.
RF Transmission Procedure
▶ The weather station automatically starts receiving transmission from remote
sensor for outdoor temperature and humidity after batteries inserted.
▶ The remote sensor will automatically transmit temperature and humidity
signal to the Weather Station after batteries inserted.
▶ If the Weather Station failed to receive transmission from remote sensor (“-
-.-”display on the LCD), press and hold 【CH】 button for 2 seconds to receive
transmission manually, RF icon flashes on the LCD，The Weather Station to
receive the remote sensor.
▶ If the weather station is received with 2 or 3 channel transmitters signals,
Press【CH】 button to query CH2, CH3 data or cyclic display.
Query Maximum/minimum numerical value
▶ When the indoor / outdoor temperature and humidity are shown in the LCD, The
weather station began to record temperature and humidity maximum and minimum
numerical value.
▶ Press【MEM】button , the LCD will display maximum value of temperature and
humidity, The LCD will display the minimum value of temperature and humidity
if you press once 【MEM】button again when the maximum value is displayed.
▶ at the same time, there are “MAX” or “MIN” displayed on the LCD.
▶ The temperature and humidity maximum/minimum value will RE records after
press and hold【MEM】button 2 seconds, at the same time, there will be “- -.-”
displayed in the LCD 1 second.
▶ The memory value of the day will be automatically cleared at 0:00 every
night.
F.Y.I.:
▶ If the temperature reading is below ranges, the LL.L will be displayed. If
the temperature reading is above ranges, the HH.H will be displayed.
Weather forecasting function
Warning: Please take the weather forecast from your local weather
forecasting service into account as well as the forecast from your weather
station. If there are discrepancies between the information from your device
and from the local weather forecasting service, please take the advice of the
latter as authoritative.
▶ The weather forecast is calculated from evaluation of fluctuations in the
barometric pressure and may deviate from the actual weather conditions.
▶ The weather symbols indicate the weather fluctuation over the next 8 hours
and not the current weather.
▶ The weather station displays the following weather symbols:
Barometric pressure trend display
The barometric pressure is rising.
The barometric pressure is falling.
The barometric pressure is steadying.
Low Battery
▶ When the low battery symbol of INDOOR appears, please replace the weather
station with new batteries.
▶ When the low battery symbol of OUTDOOR appears, please replace the remote
sensor with new batteries.
Mood light mode
▶ Touch and hold the【light】button of base 2 seconds to turn ON mood light and
enter the A mode.
▶ In mode A, touch the【light】button again to enter the mood light B mode.
▶ In mode B, touch the【light】button again to enter the mood light C mode.
▶ In mode C, touch the【light】button again to OFF the Mood light.
▶ In mode B, press and hold the【light】button for 1 second to lock the current
color and stop the gradual change. press and hold the【light】button for 1
second again to restore the gradual change.
▶ In mode C, press and hold the【light】button for 1 second to Switch to another
color fade in and out.
Wireless charging
▶ Place the mobile device which supporting QI standard on the antiskid pad
middle of wireless charger correctly, the red indicator light on.
▶ The indicator light is red when charging normally and green when fully
charged (currently only supported by some Samsung mobile devices). The red
indicator light flashes when metal or similar items are detected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>