HATTON LABS Selfridges Exclusive Tricolor Eternity Ring Instructions
- June 13, 2024
- HATTON LABS
Table of Contents
HATTON LABS Selfridges Exclusive Tricolor Eternity Ring
USING INSTRUCTION
You can have your finger sized at a jewellers but if that is not possible
we’ve created this printable ring sizer for you.
STEP 1:
Print this page ensuring your printer is set to print the page at 100%. You
should find this in “Page Set Up”.
STEP 2:
Check your print out is accurate by comparing the measurements here with a
ruler.
SIZE YOUR FINGER
- Step 1 – Size Your Finger Cut around the Finger Gauge Outline. A handy tip is to cellotape the boxed area before cutting it out.
- tep 2 – Cut a slit where indicated between the two arrows on the left of the Finger Gauge Outline. To get an accurate reading – size your finger at the end of the day with warm hands. This is because cold fingers are slimmer and may give an incorrect reading.
- Step 3 – Ensure the paper can slide up and down your finger reasonably easily, the width of the signet ring will grip your finger more than the paper!
Remember you will have 28 days to return your ring for sizing up or down.
Alternatively if you would prefer to use a plastic finger gauge, we will send
one to you. Fill in the Ring Sizer Form found under ‘Sizing Your Finger’ on
our website.
SIZE A RING
To ensure a comfortable fit, it’s important to accurately determine your ring
size. Fortunately, it’s easy to do with just a ring that already fits the
finger you’re sizing. Simply place the ring on the chart and compare it to the
circles provided, making sure to find the one where the black circle lines up
perfectly with the inside of your ring all the way around. This will ensure
that your new ring fits without any worry of slipping or feeling too tight.
- Have you also checked out our bracelet and necklace sizers?
- https://www.hattonlabs.com