DOMO DO9231KR Kitchen Machine Instruction Manual

DO9231KR
Instruction booklet
Kitchen machine

XY-MD02 Sensor Setting - Modbus RTU...

XY-MD02 Sensor Setting - Modbus RTU Network

Read all instructions carefully – save this instruction manual for future reference.

WARRANTY

Dear client,
All of our products are always submitted to strict quality control before they are sold to you.
Should you nevertheless experience problems with your device, we sincerely regret this.
In that case, we kindly request you to contact our customer service.
Our staff will gladly assist you.
+32 14 21 71 91
  info@linea2000.be
Monday – Thursday: 8.30 – 12.00 and 13.00 – 17.00
Friday: 8.30 – 12.00 and 13.00 – 16.30

This appliance has a two-year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions, or repairs executed by a third party. The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty. If your device breaks down within the 2-year warranty period, you can return the device together with your receipt to the shop where you purchased it. The guarantee on accessories and components that are liable to wear and tear is only 6 months.
The guarantee and responsibility of the supplier and manufacturer lapse automatically in the following cases:

• If the instructions in this manual have not been followed.
• In case of an incorrect connection, e.g., the electrical voltage that is too high.
• In case of incorrect, rough, or abnormal use.
• In case of insufficient or incorrect maintenance.
• In case of repairs or alterations to the device by the consumer or non-authorized third parties.
• If the customer used parts or accessories that are not recommended or provided by the supplier/manufacturer.

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken, including the
following:

• Read all instructions carefully. Keep this manual for future reference.
• Make sure all packaging materials and promotional stickers have been removed before using the appliance for the first time. Make sure children cannot play with the packaging materials.
• This appliance is intended to be used in households and similar applications such as:
• staff kitchen areas in shops, offices and other working environments;
• farmhouses;
• by clients in hotels, motels, and other residential-type environments;
• bed and breakfast type environments.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance can be used by children aged 16 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance
• Cleaning and user maintenance shall not be made by children unless they are older than 16 and supervised.
• Keep the appliance and its cord out of reach of children younger than 16 years.
• The appliance must be disconnected from its power source when not in use, during service, and when replacing parts. Allow cooling before putting on or taking off parts, and before cleaning the appliance
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• CAUTION: in order to avoid a hazard this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• Never leave the appliance unattended while it is functioning.
• Do not use or store this appliance outdoors.
• Do not use this appliance for other than intended use.
• Check carefully that the voltage and frequency of the power net match the indications on the rating label of the appliance.
• The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local standards and requirements.
• Only use the utensils delivered with the appliance
• Do not operate this appliance with a damaged cord or plug or in the event the appliance malfunctions or has been damaged in any manner. Return the appliance to the DOMO Service Department or its service agent for examination, repair, or electrical or mechanical adjustment. Do not try to repair the appliance yourself. · To protect against electrical shock or burns, do not immerse the unit, cord, or plug in water or other liquid.
• Do not operate the appliance with wet hands.
• A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. DO NOT USE WITH AN EXTENSION COR D.
• Unwrap the cord completely to prevent overheating of the cord.
• Do not let the power supply cord hang over the edge of a counter, or touch hot surfaces.
• Do not allow the power cord supply to run underneath or around the unit.
• Make sure the appliance is correctly assembled, then plug the cord in the wall outlet. To disconnect, turn the controls to the “OFF” or “0” position, then remove the plug from the wall. Never pull the cord or appliance to remove the plug from the socket.
• Do not use the appliance if there is any water in it or the parts are still wet after cleaning.
• Do not use the appliance without ingredients. · Handle with great care when using sharp accessories like knives. Only touch the accessories when they stopped moving inside the appliance.
• Failure to maintain this appliance in a clean condition could adversely affect the life of the appliance and possibly result in a hazardous situation.
• Any injury or damage caused by failure to comply with these rules is at your own risk. Neither the manufacturer, importer, or supplier may be held liable. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

PARTS

1. Speed control

2. Release button multifunctional head

3. Stainless steel mixing bowl

4. Bowl lid

5. Fill opening

6. Connection point for vegetable slicer and meat grinder

7. Multifunctional head

8. Connection point for blender

9. Beater

10. Dough hook

11. Balloon whisk

12. Blender Available separately

13. Vegetable slicer

14. Meat grinder
    

BEFORE THE FIRST USE

• Remove the appliance and the accessories from the packaging. Remove any promotional stickers.
• Wash all removable parts in warm soapy water and dry thoroughly.
• Never immerse the motor unit in water to avoid electrocution.

USE

KNEADING/BEATING/WHISKING

1. Depending on the nature of the ingredients, the mixing bowl with a lid can make 2 kg of dough.

2. Place the appliance on a flat, clean, and dry surface.

3. Make sure that the plug is removed from the socket and that the speed control is set to ‘0’.

4. Press the release button, and push the multifunctional head all the way up until it clicks into place.

5. Put the mixing bowl in the base and turn it clockwise so it locks. Put the ingredients into the bowl.

6. Place the lid on the multifunctional head via the opening provided.

7. Choose the accessory you want to use: beater, dough hook, balloon whisk.
   a. Attach the accessory to the head by sliding it around the axis.
   b. Turn the accessory a quarter turn counterclockwise.
   c. Release the accessory so that it falls into the lock position. Caution: only use the dough hook up to a maximum of speed 1.

8. Press the release button back in to push the multifunctional head back down and secure it.

9. Put the plug into the socket and select the desired speed by turning the speed control knob.

10. During the preparation, you can add ingredients through the fill opening in the lid.
    Caution : Do not use the appliance for longer than 10 minutes at a time. After 10 minutes of use, let the appliance cool down for 30 minutes before using it again.

11.  To stop the appliance, turn the speed control knob to the ‘0’ position.

DISASSEMBLY

1. Remove the plug from the socket.
2. Press the release button to secure the multifunctional head fully at the top.
3. Push the accessory out of the locked position and turn it clockwise a quarter turn. Then slide the accessory off of the drive shaft and remove the accessory. Use caution when removing the accessories since there may be sharp edges.
4. Remove the lid from the multifunctional head by rotating it anti-clockwise.
5. Turn the release button a quarter turn to the left, push the head down entirely and turn the release button a quarter turn to the right again so that it points upwards, to lock the head.
6. Press the release button in to push the multifunctional head back down and secure it again.

BLENDER

1. Depending on the nature of the ingredients, the blender is capable of mixing 1,5 liters.
2. Put the multifunctional head in a horizontal position and remove the lid from the top of the head by pulling on it.
3. Add the ingredients to the work bowl and close the work bowl with the lid, including the measuring cup in the feed tube.
4. Place the blender on the connection point and lock the blender by turning it counterclockwise.
5. Use the speed regulator to blend.
6.  During blending, it is possible to remove the measuring cup from the lid and add ingredients through the feed tube. Then always close the opening again with the measuring cup.

Note:

• Never run the blender empty.
• Never fill the work bowl with boiling fluids; always allow them to cool to room temperature.
• If you want to crush ice, do not use more than 9 ice cubes (4x4x2 cm) at a time.

AVAILABLE SEPARATELY

VEGETABLE SLICER
Turn off the machine and pull the plug from the outlet before mounting, removing or cleaning any accessories.

1. Open the lid at the tip of the multifunctional head of the food processor: tilt the lid slightly upwards and remove the lid.

2. The connection point for accessories is revealed.

3. Place the vegetable slicer on the connection point at an angle of 25° and turn it counterclockwise a quarter turn. You will hear a click when it is attached. The vegetable slicer is now perfectly vertical.

4. Press the grater into the opening of the vegetable slicer. You may select from a cutter and 2 different graters.
   

5. Operate the vegetable slicer with the food processor’s speed regulator.

6. Vegetables can be pushed into the vegetable slicer safely by using the pusher.

7. To remove the vegetable slicer: Press the unlock button (see diagram) and turn the vegetable slicer clockwise a quarter turn.

8. Remove the vegetable slicer and replace the lid on the connection.

9. Clean and dry all parts thoroughly prior to using them again.

MEAT GRINDER
Turn off the device, and take the plug out of the socket before you add, remove or clean any accessories.

1. Open the lid at the tip of the multifunctional head of the food processor: tilt the lid slightly upwards and remove the lid.

2. The connecting point for accessories is now shown.

3. Place the meat grinder at an angle of 25° to the connection point and tighten it by making a quarter turn clockwise. You hear a click when it is securely fastened. Your meat grinder is now in a perfectly vertical position.

4. For grinding meat insert in succession: the worm wheel and the cutting knife.

5. Then make a selection from the grinding discs.

6. Position the notch on the disc at the height of the projecting catch.

7. Connect it all together with the screw ring.

8. Position the bowl in the best way possible so as to put your meat in it.

9. You can use the pushing rod to press the meat firmly inside.

10. For sausage making, insert the following components:

11. For making stuffed meatballs insert the following components:

12. To remove the meat grinder, press the release button next to the connection point for a meat grinder.
    Make a quarter turn clockwise on the meat grinder. Clean all parts thoroughly and dry them carefully before using them again.
    Cleaning: Do not use the dishwasher for cleaning the meat grinder.

CLEANING AND MAINTENANCE

1. Always remove the plug from the socket before cleaning the appliance. Make sure that the speed regulator button is set to “0”.
2. Never immerse the motor unit in water or under running water. Clean the motor unit with a soft, damp cloth.
3. Disassemble all accessories according to the instructions under the section ‘Disassembly’.
4. For quick cleaning, rinse the accessories under running water.
5. For thorough cleaning, wash, rinse and dry the accessories.
6. To clean the blender, combine warm water with a few drops of detergent in the blender. Put the lid on the blender. Briefly turn the speed regulator to pulse and back.  Repeat if needed. Rinse the blender under running water and allow it to drip-dry upside down.

ENVIRONMENTAL GUIDELINES

**** This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it must be brought to the applicable collection point or recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment nd human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging ecologically.

Webshop
ORDER
the original
Domo
accessories and
parts online at:
webshop.domo-elektro.be

http://webshop.domo-elektro.be
LINEA 2000 BV – Dompel 9 – 2200 Herentals – Belgium –
Tel: +32 14 21 71 91 –
Fax: +32 14 21 54 6

Documents / Resources

| DOMO DO9231KR Kitchen Machine [pdf] Instruction Manual
DO9231KR, Kitchen Machine, DO9231KR Kitchen Machine
---|---

References

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>