LopiStoves 98801097 Large Flush NexGen Hybrid Wood Burning Inserts User Manual
- June 13, 2024
- LopiStoves
Table of Contents
LopiStoves.comFireplacex.com
Large Flush
NexGen-Hybrid™
Wood Burning Inserts
98801097 Large Flush NexGen Hybrid Wood Burning Inserts
THIS MODEL QUALIFIES FOR THE 30% USA TAX CREDIT ON THE PURCHASE, VENTING AND INSTALLATION COSTS PLEASE CONSULT WITH YOUR TAX ADVISOR TO CONFIRM YOUR ELIGIBILITY FOR THIS TAX CREDIT
Our Cleanest Burning Large Wood Insert
The Large Flush NexGen-Hybrid™ Wood Insert is a great option for those looking
to upgrade their old, inefficient fireplace. It features a sleek, flush
design, a big, beautiful fire viewing area, and concealed convection fans that
increase the transfer and circulation of heat throughout your home.
NexGen-Hybrid™ Technology provides cleaner, longer burns, higher efficiencies
and more heat into your home. This makes the Large Flush NexGen-Hybrid™ Wood
Insert one of the most efficient and cost effectiveways to heat your home,
even if the power goes out.
Here are just a few benefits you’ll love about the Large Flush NexGen-Hybrid™ Wood Insert:
- Cleaner burns with lower emissions than traditional wood inserts.
- Massive 3 cubic foot firebox accommodates logs up to 24 inches long, which allows you to burn more wood efficiently and for longer burn times
- Bypass damper helps to prevent smoke-backs during loading and reloading.
- Single operation air control gives you full range of control over the burn rate (low, medium, and high).
- Huge fire viewing area with beautiful arched and rectangular door designs.
- Optional Green Start® Igniter makes starting your wood fires as easy as pushing a button!
*Green Start® Igniter option requires additional firebox width measured 3” from front of fireplace opening.
SPECIFICATIONS
| Heating Capacity*: | 1,500 – 2,500 Square Feet |
|---|---|
| Cord Wood BTU’s: | 18,000 – 67,000 |
| Crib Wood BTU’s: | 11,162 – 39,875 |
| Emissions: | 0.8 Grams/Hr. (Crib Wood) |
| HHV Overall Efficiency: ** | Up to 77.8% |
| Maximum Burn Time: | Up to 12 Hours |
| Firebox Size: | 3 Cubic Feet |
| Maximum Log Size: | 24 Inches |
| Weight: | 530 Pounds |
| Construction: | 5/16” to 1/4” Steel Plate |
| Glass Viewing Area: | 24-1/2” W x 13” H |
307 Sq. In. Arch Door
319 Sq. In. Rectangular Door
- Heating capacity may vary depending on degree of home insulation, floor plan and ambient temperature zone of the area you live.
**As tested using B-415.1. HHV = High Heat Value
OPTIONS
- Insert Wiring Kit
- Igniter starts your fire with the push of a button!
RECTANGULAR DOOR FACE OPTIONS
Universal Face
Metallic Black paint finish 35-3/8” W x 26-1/4” H
Times Square™ Face
Metallic Black paint finish 37-3/4” W x 25-3/4” H
Metropolitan™ Face
Metallic Black paint finish
35-3/8” W x 26-1/4” H
Shadowbox™ Face
Metallic Black paint finish
37-3/4” W x 25-1/8” H
Cast Iron Boston™ Face
Metallic Black paint finish
36-1/4” W x 25” H
CLEARANCES TO UNPROTECTED COMBUSTIBLES
A = Insert Base to Top Facing
B = Insert Base to Mantel
C = Firebox Side to Side Facing
D = Firebox Side to Side Wall
| Masonry | Metal (ZC) |
|---|---|
| 37” | 37” |
| 41” | 41” |
| 5-1/2” | 5-1/2” |
| 10-1/2” | 10-1/2” |
SIZING YOUR FIREPLACE FOR AN INSERT
Your Fireplace Measurements
E = Depth
F = Front Width
G = Back Width
H = Height
I = Hearth Depth
Please use the provided chart above to mark down your fireplace dimensions.
This will assist you in determining the right insert for your fireplace.
Approved ZC Fireplaces: See the Owner’s Manual for details.
ARCHED DOOR FACE OPTIONS
Wilmington™ Face
Metallic Black paint finish
35-3/8” W x 26-3/8” H
Classic Arch™ Face
Metallic Black paint finish
35-1/4” W x 26-3/8” H
Artisan™ Hand-Forged, Hand
Hammered Face
New Iron paint finish
35-1/4” W x 26-3/8” H
Limited to stock on hand
Cast Iron Boston™ Face
Metallic Black paint finish
36-1/4” W x 25” H
98801097
References
- Fireplaces | Inserts | Wood | Gas | Fireplace Xtrordinair
- Stoves | Wood | Gas | Pellet | Lopi Stoves®