FuelTech 5010100058 Wastegate Boost Pressure Dual Valve Controller Instructions
- June 13, 2024
- FuelTech
Table of Contents
FuelTech 5010100058 Wastegate Boost Pressure Dual Valve Controller
Instructions
Wastegate boost pressure control
The active control function of the wastegate valve pressure is used for a more
precise control of turbo pressure in street, circuit and, mostly, drag race
cars. The control can be performed by time after 2-step, by gear and engine
RPM, by gear elapsed time, by a single target or by engine RPM, besides
specific targets for 2-step, 3-step and burnout mode.
IMPORTANT:
- The pressure controlled by Boost Controller is the pressure at the top of the wastegate valve.
- You can set the maximum MAP pressure and maximum MAP pressure on 2-step.
- When the Boost Controller is off the target is zero, and each time the read pressure, for any reason, exceeds 1.45psi the decrease solenoid is activated.
Installation diagram
- Decrease solenoid/injector trigger – connected to the blue or yellow output
- Decrease solenoid
- Increase solenoid/injector trigger – connected to the blue or yellow output
- Increase solenoid
- 12V from relay
- Intake or CO2 bottle
- Pressure sensor
- Pressure sensor hose
- Intake
- Free air
- Control pressure Wastegate
- FT dual valve block
- Activation LED
Read User Manual Online (PDF format)
Loading......