XJGP1100000 Ravak Chrome Sink Instruction Manual

XJGP1100000 Ravak Chrome Sink

The UMYVADLO CHROME is a washbowl designed for installation in bathrooms. It is available in different sizes: CHROME 400 (L/R), CHROME 600, CHROME 700, and CHROME 800. The product comes with the necessary wall plugs and screws for installation.

Please note that the washbowl should only be fitted to solid walls made of full bricks or concrete. If you have porous concrete, hollow bricks, or plasterboard walls, it is important to reinforce the area where the washbowl will be positioned with a structure that has sufficient load-carrying capacity. In such cases, you should use the corresponding wall plugs and screws.

Product Usage Instructions

1. Choose the appropriate size of the washbowl based on the dimensions provided:
   • A = 55 – CHROME 400 (L/R)
   • A = 50 – CHROME 600, 700, 800
   • L = 290 – CHROME 400 (L/R)
   • L = 280 – CHROME 600
   • L = 280 – CHROME 700
   • L = 440 – CHROME 800
2. Ensure you have a solid wall made of full bricks or concrete for installation.
3. If your wall is made of porous concrete, hollow bricks, or plasterboard, reinforce the area where the washbowl will be positioned with a structure that has sufficient load carrying capacity.
4. Use the enclosed wall plugs and screws to secure the washbowl to the wall. Make sure to follow the installation instructions provided.
5. Tighten the screws using a torque wrench, applying a maximum torque of 1 Nm.
6. Allow at least 30 minutes for the installation to set properly.
7. For further information or assistance, contact your local Ravak dealer.

Note: The manufacturer reserves the right to amend or improve on existing designs or features. Please help preserve the environment by observing local country guidelines or laws regarding recycling. Materials that are not suitable for recycling should be disposed of at an official and suitable waste control center.

INSTALLATION INSTRUCTIONS

• CHROME 400 (L/R)

• CHROME 400 (L/R)

• CHROME 700

• CHROME 800

PARTS AND TOOLS

In order to secure the correct functioning, the product may be fitted only to solid walls of bathrooms made of full bricks or concrete for which the enclosed wall plugs with screws are designed. When installing on the specific materials of the walls (porous concrete, hollow bricks, or plasterboard) it is necessary to reinforce the place where the washbowl is positioned, by the structure with sufficient load-carrying capacity and use the corresponding wall plugs and screws.

INSTALLATION

• Separator, e. g. liquid soap
• White cement
• Ce mento blanco

Washbasins without an overflow need to be fitted with a fixed (unclosable) waste plug.

MAINTENANCE

Clean the plastic parts with a cloth and mild detergent. Never use any abrasive pastes, dissolvents, acetone or detergents, and disinfectants, that contain chlorine. The manufacturer accepts no liability for any type of use or care other than those contained in these instructions. The manufacturer reserves the right to introduce technical changes without notice. For further information about assembly, use, and care contact your local dealer.

The manufacturer recommends: RAVAK CLEANER – works to remove old and dried-on debris from glass surfaces, shower frames,
enamel and acrylic bathtubs, washbasins, and water taps; RAVAK DISINFECTANT – is a special preparation with considerable antibacterial and anti-fungal effects.

For further information, contact your local Ravak dealer
The manufacturer reserves the right to amend or improve on existing designs or features.
Please help preserve the environment by observing local country guidelines or laws regarding recycling. Materials that are not suitable for recycling must be disposed of at an official and suitable waste control center

CONTACT

• ADDRESS: RAVAK a.s., Representative Office in Ukraine, 21 Dniprovska Naberezhna str., 2nd floor, 02081, Kyiv, Ukraine
• FAX: 73 44 77 434
• tel.: 00380 44 2203232, 00380 44 3605200,
• fax: 00380 44 2204343,
• e-mail: [email protected],
• web: www.ravak.ua
• ADDRESS: 00O RAVAK ru, ul. Staropetrovskiy pr. 7A, Moskva 125 130,
• tel./fax: 007 495 710 82 23, 007 495 450 12 77,
• e-mail: [email protected],
• web: www.ravak.com

References

• RAVAK COM - Acrylic Bathtubs and Shower Enclosures
• RAVAK a.s. - Když koupelnu, tak RAVAK – české koupelny světového designu!
• RAVAK GmbH - Das Badeerlebnis in Ihrem Badezimmer
• RAVAK Hungary Kft. - ha fürdőszoba akkor RAVAK
• Ravak Polska S.A. - dożywotnia gwarancja na wszystkie wanny. Kompleksowe wyposażenie łazienek.
• Kúpeľňa a zariadenie kúpeľne | RAVAK
• RAVAK UA - ЕСЛИ ВАННАЯ КОМНАТА, ТО RAVAK (ванны, душевые уголки, умывальники, гидромассаж )

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>