Anker A2037 PowerPort Ill 2-Port 100W User Manual

Anker A2037 PowerPort Ill 2-Port 100W

USER MANUAL

Attention

Read all the instructions before using the product.

• The product is designed for use with IT equipment only.
• The maximum ambient temperature during use of the appliance must not exceed 25°C.
• Naked flame sources, such as candles, must not be placed on the product.
• The disconnection from line voltage is made by AC plug.
• In case of broken plugs, the product must be disposed of.
• If you want to clean the product, only use a dry cloth or brush.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).

Using Your Product

For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party (for FCC matters only).

Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764

Telephone: +1 (800) 988 79733

This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

•  Indoor use only
• This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

Specifications

USB-C1/USB-C2 Output/出力:
5.0V 3.0A / 9.0V 3.0A
15.0V 3.0A / 20.0V 5.0A (100.0W Max Per Port)
PPS:3.3V-16.0V 5.0A (80.0W Max Per Port)
Use Two Ports (2ポート同時利用時):
USB-C1 Output/出力:
5.0V 3.0A / 9.0V 3.0A / 15.0V 3.0A
20.0V 3.0A (60.0W Max)
PPS:3.3V-16.0V 3.0A (48.0W Max)
USB-C2 Output/出力:
5.0V 3.0A / 9.0V 3.0A / 15.0V 2.66A
20.0V 2.0A (40.0W Max)
PPS:3.3V-16.0V 2.0A (32.0W Max)
Total Output/出力: 100.0W Max

Customer Service

• 18-month limited warranty
• Lifetime technical support

support@anker.com
support.mea@anker.com (For Middle East and Africa Only)
(US) +1 (800) 988 7973 Mon-Fri 9:00 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Sun 6:00 – 14:00
(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 – 11:00
(Middle East & Africa) +971 42463266 Sun-Thu 9:00 – 17:30
(UAE) +971 8000320817 Sun-Thu 9:00 – 17:30
(KSA) +966 8008500030 Sun-Thu 8:00 – 16:30
(Kuwait) +965 22069086 Sun-Thu 8:00 – 16:30
(Egypt) +20 8000000826 Sun-Thu 7:00 – 15:30
(AU) +61 3 8331 4800 Mon-Fri 8:30 – 17:00 (AEST)
(TR) +90 0850 460 14 14 Mon-Fri 9:00 – 18:00
(RU) +8 (800) 511-86-23 Mon-Fri 9:00 – 18:00 (MSK)
( 中国) +86 400 0550 036 周一至周五 9:00 – 17:30
( 日本) 03 4455 7823 月- 金 9:00 – 17:00
( 한국 ) +82 02-1670-7098 월 – 금 10:00 – 17: 00

For FAQs and more information, please visit:
anker.com/support

DOWNLOAD

Anker A2037 PowerPort Ill 2-Port 100W User Manual – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>