Eaton 5P1550IR Uninterruptible Power Supply (UPS) Specifications And Datasheet
- June 13, 2024
- EATON
Table of Contents
Eaton 5P1550IR Uninterruptible Power Supply (UPS)
Description
Protecting your priceless electronic equipment from power fluctuations and outages is easy with the Eaton 5P1550IR Uninterruptible Power Supply (UPS). It guarantees continuous power to essential devices, such as servers, workstations, networking equipment, and more, with a huge 1500VA (1050W) capacity. With the help of its LCD display, you can keep an eye on voltage, battery life, and load levels in real-time.
With its energy-saving features, this UPS is not only effective but also environmentally responsible. It makes use of Eco-Control technology to optimize power usage and lower operating expenses. Its versatility is further increased by the ease with which it may be added to your network for remote management and monitoring.
Manageability
-
The new graphical LCD display provides clear information on the UPS’s status and measurements on a single screen (in seven languages). Enhanced configuration capabilities are also available with easy-to-use navigation keys.
-
The 5P can meter energy consumption providing kWh values through the LCD and Eaton’s power management software.
-
Load segment control enables prioritized shutdowns of
non-essential equipment during outages in order to maximize battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups. -
The 5P offers Serial and USB connectivity, plus an extra slot for an optional communication card (including SNMP/ Web card or relay contact card). Eaton’s Intelligent Power Software Suite compatible with all major OS including virtualization software such as VMware and Hyper-V is included with each UPS.
Performance and efficiency
- Energy-efficient UPS: With an optimized electrical design, the 5P provides up to 98% efficiency, reducing cooling and utility costs.
- Pure sinewave output: When operating in battery mode the 5P provides a high-quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.
- Adjustable tolerance and sensitivity: Users can maximize useful battery life by widening the input voltage window or adjustable input waveform sensitivity (via the LCD or software) to adapt the UPS to a specific environment (like Genset).
Availability and Flexibility
- The 5P is available in tower or Rack 1U format, providing unmatched energy density with up to 1.1 kW in only 1U.
- Stronger, longer battery life: Eaton ABM® battery management technology uses an innovative three-stage charging technique that extends batteries by up to 50%.
- Batteries can be hot-swapped without ever having to shut down connected equipment. With an optional, hot-swap maintenance bypass module, you can even replace the entire UPS.
Ideal for protecting:
- Servers
- Networking
- Storage devices
Technical specifications
- Rating (VA/W): VA/1100 W
- Technology: Tower or Rack 1U
Electrical characteristics
- Technology: Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
- Input voltage and frequency ranges without using batteries: 160 V-294 V (adjustable to 150 V-294 V), 47 to 70 Hz (50 Hz system), 56.5 to 70 Hz (60 Hz system), 40 Hz in low-sensitivity mode
- Output voltage and frequency: 230 V (Adjustable to 200V / 208V / 220V / 230V / 240V), 50/60 Hz +/- 0.1 % (autosensing)
Connections
- Input: 1 IEC C14 (10 A)
- Outputs Tower model: 8 IEC C13 (10 A)
- Outputs Rack 1U model: 6 IEC C13 (10 A)
- Switched Outlet Group: 2 outlet groups
Battery
- *Typical backup times at 50 and 70% load:** 13/8 min
- Battery management: ABM or constant voltage charging method (user selectable), automatic battery test, deep discharger protection.
Communication
- Communication Ports: 1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously), 1 mini terminal block for remote ON/OFF and Remote Power Off
- Communication Slot: 1 slot for Network-MS card, ModBus-MS, or Relay-MS cards
Operating conditions, standards, and approvals
- Operating temperature: 0 to 40°C
- Noise level: <40 dB
- Safety: IEC/EN 62040-1, UL 1778
- EMC, Performance: IEC/EN 62040 -2, IEC/EN 62040-3 (Performance)
- Approvals: CE, CB report (TUV)
- Part numbers: 1550
- Rack 1U: 5P1550iR
Dimensions H x W x D / Weight
- Rack 1U models: 43.2 (1U) 438 554 mm / 19.4 kg
Customer service & support
Warranty 3 years on electronics, 2 years on batteries
Runtimes are shown at 0.7 power factor. Backup times are approximate and may
vary with equipment, configuration, battery age, temperature, etc.
Trademark
Changes to the products, to the information contained in this document, and to
prices are reserved; so are errors and omissions. Only order confirmations and
technical documentation by Eaton is binding. Photos and pictures also do not
warrant a specific layout or functionality. Their use in whatever form is
subject to prior approval by Eaton. The same applies to Trademarks (especially
Eaton, Moeller, and Cutler-Hammer). The Terms and Conditions of Eaton apply,
as referenced on Eaton Internet pages and Eaton order confirmations. Eaton is
a registered trademark. All other trademarks are property of their respective
owners.
Address: Eaton Industries Manufacturing GmbH Electrical Sector EMEA Route
de la Longeraie 7 1110 Morges, Switzerland Eaton.eu © 2018 Eaton All Rights
Reserved Printed in Europe
Article: Eaton 5P Datasheet
FAQ’s
What is the Eaton 5P1550IR Uninterruptible Power Supply (UPS)?
The Eaton 5P1550IR is a Uninterruptible Power Supply (UPS) designed to provide reliable backup power to connected devices during power outages or fluctuations.
What is the capacity (power rating) of the Eaton 5P1550IR UPS?
The Eaton 5P1550IR UPS has a capacity of 1550VA/1100W, making it suitable for protecting a variety of critical devices and equipment.
What types of devices can be connected to this UPS?
You can connect a range of devices to the Eaton 5P1550IR UPS, including computers, servers, networking equipment, and other sensitive electronics.
What is the runtime of the UPS on battery power?
The runtime of the Eaton 5P1550IR UPS on battery power depends on the load (the connected devices' power consumption). It's advisable to refer to the manufacturer's specifications for runtime estimates at different load levels.
Does the UPS provide surge protection?
Yes, the Eaton 5P1550IR UPS typically provides surge protection to safeguard connected devices from voltage spikes and surges.
Is the UPS compatible with both Windows and Mac operating systems?
Yes, the Eaton 5P1550IR UPS is often compatible with both Windows and Mac operating systems, ensuring broad compatibility with different systems.
What is the input voltage range supported by this UPS?
The input voltage range can vary, but the Eaton 5P1550IR UPS is typically designed to work with a wide input voltage range to accommodate different power sources.
Does it come with a warranty?
The Eaton 5P1550IR UPS typically comes with a warranty of 3 years on electronics, 2 years on batteries.
What is the weight and dimensions of the UPS?
The UPS has specific weight 19.4 kg and dimensions 43.2 (1U) x 438 x 554 mm.
Can the UPS be rack-mounted?
The Eaton 5P1550IR UPS may be rack-mountable, but it's essential to check if additional rack-mounting hardware is required.
Is there any software included for managing the UPS?
Some UPS models include management software for monitoring and managing the UPS's status and settings. Check if such software is included with the Eaton 5P1550IR UPS.
What is the typical recharge time for the UPS battery after a power outage?
The recharge time of the UPS battery can vary, but it's often designed to recharge within a few hours to be ready for the next power outage.
References:Eaton 5P1550IR Uninterruptible Power Supply (UPS) – Device.report