LOGIC B10L 4G Bar Phone User Guide
- June 13, 2024
- Logic
Table of Contents
- B10L 4G Bar Phone
- Charge for 24 hours before using.
- Install SIM card / memory card.
- Get to know your Logic phone
- Connect your Logic phone to the computer using a USB cable (not
- Copy music files from your computer to your Logic phone.
- Warranty Certificate Terms and Conditions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LOGIC BIOL
4G BAR PHONE
QUICK GUIDE
B10L 4G Bar Phone
Thank you for purchasing this innovative LOGIC device. The specifications in
this document are subject to change without prior notice.
LOGIC and the LOGIC logo are registered trademarks of Swagtek, Inc. Other
trademarks are the property of their respective owners.
Charge for 24 hours before using.
Install SIM card / memory card.
Get to know your Logic phone
Connect your Logic phone to the computer using a USB cable (not
included).
Copy music files from your computer to your Logic phone.
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the US.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The exposure standard for wireless
mobile phones employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 16 W/kg Tests for SAR are
conducted with the phone transmitting at its highest
certified power level in all tested frequency bands, Although the SAR is
determined at the highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to use only the
power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output. Before a phone
modelis available for sale to the public, it must be tested and certified to
the FCC that it does not exceed the limit established by the government
adopted requirement for safe exposure. The tests are performed in positions
and locations (e.g., at the ear and worn on the body) as required by the FCC
for each model. The highest SAR value for this model phone when tested for use
at the ear is 0.681 W/Kg and when worn on the body, as described in this user
guide, is 1238 W/Kg(Body-worn measurements differ among phone models,
depending upon available accessories and FCC requirements} While there may be
differences between the SAR levels of various phones and at various positions,
they all meet the government requirement for safe exposure The FCC has granted
an Equipment Authorization for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RFexposure guidelines SAR information
on this model phone is on file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID:
OSS2403323 Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site
at http://www.wow-com.com. In the United States and Canada, tne SAR limit
for mobile phones used by the public is 16 watts/kg (W/kg) averaged over one
gram of tissue. The standard incorporates a sub-stantial margin of safety to
give additional protection for the public and to account for any variations in
measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of l1Omm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
Warranty Certificate Terms and Conditions
LOGIC warrants that their Products will be free from defects in material and
workmanship.
The warranty period is one (1) year for the products and three (3) months for
the accessories which are part of the original package including the battery.
The warranty period begins the date of purchase by the End-User who shall
present an invoice or a purchase receipt when requiring warranty service
otherwise the warranty period will begin from the date of manufacture of the
product. LOGIC will repair a product without cost to the customer if it
presents a manufacturing defect or defect in workmanship during the warranty
period and if
the defect occurred under normal conditions of use in accordance with the
instructions and specifications stated in the user’s manual.
For additional information about the terms and conditions of LOGIC’s Limited
Warranty or to obtain warranty service information, please visit the support
section at: logicmobility.com
logicmobility.com
Made in China
Copyright Swagtek, Inc. 2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>