PHILIPS TT150 GreenSpace Downlight Instruction Manual
- June 13, 2024
- Philips
Table of Contents
PHILIPS TT150 GreenSpace Downlight Instruction Manual
What in the Box
| | | | |
---|---|---|---|---|---
TT150| 150-154| 170| 77| 0.6| TT195| 195-199| 215| 77| 0.7| TT240| 240-244|
260| 94| 0.9
TT155| 155-159| 175| TT200| 200-204| 220|
94
| 0.8| TT245| 245-249| 265
TT160| 160-164| 180| TT205| 205-209| 225| TT250| 250-254| 270| 1.0
TT165| 165-169| 185| TT210| 210-214| 230| TT255| 255-259| 275
TT170| 170-174| 190| TT215| 215-219| 235| TT260| 260-264| 280
TT175| 175-179| 195| 0.7| TT220| 220-224| 240| TT265| 265-269| 285
TT180| 180-184| 200| TT225| 225-229| 245| 0.9| TT270| 270-274| 290
TT185| 185-189| 205| TT230| 230-234| 250| TT275| 275-279| 295
TT190| 190-194| 210| TT235| 235-239| 255| TT280| 280-284| 300
Dimension
The housing of the luminaire has been reviewed and approved as an IP54
enclosure.
C = 150 or 200 for cutout ≥ 225 mm > = 3000 lm
The luminaire shall, under no circumstance, be covered with thermal insulation matting or similar material.
Assembly Instructions
Inrush current
| 20W DS I| 30W DS I| 40W DS I| 20W R| 40W R| 36W WIA-E
---|---|---|---|---|---|---
| Electrical characteristics
Imax (A)| 14.1| 14.5| 16.5| 6.7| 9| 4.9
Tref (µs)| | | | 27| 10| 56
MCB| Luminaires max.
B-10 A| 40| 34| 30| 25| 25| 15
B-13 A| 52| 43| 38| 32| 32| 19
B-16 A| 65| 54| 48| 40| 40| 24
C-10 A| 67| 56| 49| 41| 41| 24
C-13 A| 87| 72| 64| 54| 54| 32
C-16 A| 110| 91| 81| 68| 68| 40
Polar intensity diagram
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control conductors
The control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. The light source contained in this luminaire is not replaceable, in case of damage replace the luminaire
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or label.
Disposal of the product.
This product is made of high quality materials and components that can be recycled and reused. If a product is marked with the crossed-out circular garbage can symbol shown here, it means that it is subject to the European Directive 2012/19/EU. You should check the information about local facilities collecting used electrical and electronic products and their packaging on your own. Local regulations prohibiting the discarding of equipment and packaging together with municipal waste must be strictly observed. Proper disposal of used packaging and product will help to avoid potential harmful eff ects on the environment and human health.
© 2023 Signify Holding.
All rights reserved. This document contains information relating to the
product portfolio of Signify which information may be subject to change. No
representation or warranty as to the accuracy or completeness of the
information included herein is given and any liability for any action in
reliance thereon is disclaimed. The information presented in this document is
not intended as any commercial oer and does not form part of any quotation or
contract. Philips and the Philips Shield Emblem are registered trademarks of
Koninklijke Philips N.V.. All other trademarks are owned by Signify Holding or
their respective owners.
Signify Holding.
The Netherlands
Data subject to change without notice
Keep for future reference: https://pro.mycreation.lighting.philips.com/
