Anker PowerWave Magnetic 2-in-1 Stand with 4 ft USB-C Cable A2561 User Manual
- June 13, 2024
- Anker
Table of Contents
- Anker PowerWave Magnetic 2-in-1 Stand with 4 ft USB-C Cable A2561
- LED Indicator
- Important Safety Instructions
- FCC Statement
- Radiation Exposure Statement
- IC Statement
- Declaration of Conformity
- Anker Innovations Limited
- Specifications
- DOWNLAD
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Anker PowerWave Magnetic 2-in-1 Stand with 4 ft USB-C Cable A2561
USER MANUAL
LED Indicator
LED Indicator | Status |
---|---|
Solid white for 3 seconds,then turns off | Connected to power |
Breathing white | Charging |
Flashing white | •Metal or abnormal objects detected |
•Over-temperature protection
WARNINGS:
- This wireless charger is not compatible with non-Magsafe phone cases, such as Otterbox Defender cases.
- Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, metal, or NFC cards, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
- Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F.
- The position of your AirPods or other TWS (True Wireless Stereo) Bluetooth earphones on the wireless charger will affect the charging speed. The farther they are placed from the center of the wireless charger, the slower the charging speed will be.
Important Safety Instructions
Please refer to the electrical and safety information before installing or operating the product.
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during use of this product must not exceed 40°C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator & your body.
Product Name: PowerWave Magnetic 2-in-1 Stand
Model: A2561
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference.
RSS-Gen Issue 5 March 2019
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2561 is in
compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.anker.com/
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3-5, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2561 is in
compliance with Radio Equipment Regulations 2017 & The Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the GB declaration of conformity is
available at the following internet address:
https://www.anker.com.
Specifications
Input: 5V 2.4A / 9V 2A / 12V 2A / 15V 2A
Output: 5W / 7.5W
- Indoor use only.
- This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
V02For FAQs and more information, please visit:
DOWNLAD
Anker PowerWave Magnetic 2-in-1 Stand with 4 ft USB-C Cable A2561 User Manual – [Download PDF]