PHILIPS MS SM Series Accent Cylinder Surface Instructions

June 13, 2024
Philips

PHILIPS MS SM Series Accent Cylinder Surface

PHILIPS MS SM Series Accent Cylinder Surface

Features

Feature

Surface mounted

Surface mounted

Dimensions in mm

Dimensions in mm

ATTENTION OBSERVE PRECAUTIONS
FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES

  • The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
  • This luminaire is not suitable for use as emergency lighting.
  • The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
  • Clean with dry cloth.

Inrush current

| PSU| DIA| WIA
---|---|---|---

20W

| 36W| 20W| 36W|

36W

Electrical characteristics

Imax (A)

| 4.4| 4.6| 18| 18| 4.9
Tref (µs)| 66| 65| 250| 250|

56

MCB

|

Luminaires max.

B-10 A

| 21| 21| 21| 21| 15
B-16 A| 34| 34| 34| 34|

24

C-10 A

| 35| 35| 35| 35| 25
C-16 A| 57| 57| 57| 57|

40

Inrush current

Data subject to change without notice
Keep for future reference: https://pro.mycreation.lighting.philips.com/

Installation Instructions

Installation Instructions
Installation Instructions

Disconnect before servicing

Luminaire has basic insulation between Low Voltage supply and control conductors.

The control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. The light source contained in this luminaire is not replaceable, in case of damage replace the luminaire.

Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.

This product contains a light source of energy efficiency class: see table or label.

Disposal of the product.

This product is made of high quality materials and components that can be recycled and reused. If a product is marked with the crossed-out circular garbage can symbol shown here, it means that it is subject to the European Directive 2012/19/EU. You should check the information about local facilities collecting used electrical and electronic products and their packaging on your own. Local regulations prohibiting the discarding of equipment and packaging together with municipal waste must be strictly observed. Proper disposal of used packaging and product will help to avoid potential harmful effects on the environment and human health.

444316027502

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals