PHILIPS MS-PT Accent Cylinder Pendant Instruction Manual
- June 13, 2024
- Philips
Table of Contents
PHILIPS MS-PT Accent Cylinder Pendant
Features
| | | |
---|---|---|---|---
Pendant Surface
Dimensions in mm
Pendant Track
Dimensions in mm
ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
- The luminaire shall be installed by a qualifled electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
- This luminaire is not suitable for use as emergency lighting.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Clean with dry cloth.
Inrush current
MS PT
| 12S, 17S, 23S, 27S except FMT, 32S| 27S FMT, 37S, 39S, 42S| DIA / PSD| WIA
---|---|---|---|---
Electrical characteristics
Imax (A)| 8.75| 14.2| 18| 8.07
Tref (µs)| 190| 227| 2.8| 21
MCB|
Luminaires max
B-10 A| 30| 22| 17| 15
B-13 A| 39| 29| 21| 19
B-16 A| 49| 36| 27| 24
C-10 A| 51| 37| 28| 25
C-13 A| 66| 48| 36| 32
MS PS
|
12S, 17S ex. FMT, 23S,
| 17S FMT, 27S ex. FMT 37S CRI80| 27S FMT, 37S CR190 39S, 42S| 12S, 17S ex. FMT, 23S| 17S FMT, 23S, 27S 37S, 42S|
WIA
---|---|---|---|---|---|---
Electrical characteristics
Imax (A)
| 14| 14.5| 16.5| 18| 18| 4.9
Tref (µs)| 130| 150| 150| 250| 250|
56
MCB
|
Luminaires max
B-10 A
| 42| 35| 31| 21| 21| 15
B-13 A| 52| 43| 38| 27| 27|
19
B-16 A
| 65| 54| 48| 34| 34| 24
C-10 A| 67| 56| 49| 35| 35|
25
C-16 A
| 87| 73| 64| 57| 57|
40
Installation Instructions
Track version PSD assemble
ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control conductors.
The control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. The light source contained in this luminaire is not replaceable, in case of damage replace the luminaire.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or label.
Disposal of the product.
This product is made of high quality materials and components that can be
recycled and reused. If a product is marked with the crossed-out circular
garbage can symbol shown here, it means that it is subject to the European
Directive 2012/19/EU. You should check the information about local facilities
collecting used electrical and electronic products and their packaging on your
own. Local regulations prohibiting the discarding of equipment and packaging
together with municipal waste must be strictly observed. Proper disposal of
used packaging and product will help to avoid potential harmful eff ects on
the environment and human health.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>