SoundCore BeatLight B32 LED Light Strip A3561 User Manual

SoundCore BeatLight B32 LED Light Strip A3561

USER MANUAL

What’s In The Box

Testing

Spread through the light strips straight and power on to test whether they light normally.

Warning : Ensure to correctly connect the control box with the light strips.

Installing

1. Choose a dry, clean and smooth surface and wipe off the dust with alcohol prep pads.

2. Tear off the adhesive tape and paste the light strips on the chosen surface immediately.

Warning: Avoid bending on the LED beads.

3. Press firmly to remove the air between the light strips and the surface.

4. Use the provided adhesive hooks to reinforce it if necessary.

5. Connect to the power adapter and then the power supply

Control Box

Soundcore APP

Download the Soundcore app to enhance your experience.

• Connect, manage, and disconnect the device.
• Check product information.
• Upgrade the firmware.
• Set the timer for the lights to automatically turn on and off.
• Adjust and manage light patterns.
• Adjust the basic light colors and paints.
• Customize unique light effects (Color/Speed/Direction/Brightness).
• Make your own playlist and each track can be accompanied by multiple light effects.
• Switch voice pickup modes (Built-in microphone/PartyCast).
• Adjust voice pickup sensitivity (High/Medium/Low).
• Enter PartyCast mode to sync with your PartyCast speaker.

Voice Pickup Modes

There are two voice pickup modes you can select from the Soundcore app.

• Microphone: the light will be synchronized with the ambient sounds or music. You can also adjust the voice pickup sensitivity of the microphone.
• PartyCast: wirelessly connect with your PartyCast speaker and the light will be synchronized with the music played by the speaker, without noise interference.

Rhythm & Motion

The light strips come with multiple preset light patterns both in the rhythm and motion categories.

PartyCast

PartyCast enables the light strips to wirelessly connect with your PartyCast speaker, the ambient sounds will be blocked and the light effects will be synchronized with the music played.

1. Read carefully the user manual of your PartyCast speaker and complete the Bluetooth connection with your smartphone or tablet.
2. Activate PartyCast pairing mode of the PartyCast speaker.
3. Press the PartyCast button on the control box to enter PartyCast pairing mode. Alternatively, select “PartyCast” to connect from in the app.

How to check whether the PartyCast connection is successful or not?
Pause the music, clap your hands, and check the light strips’ response.

• If the light strips respond with light effects, this means they are not connected with the PartyCast speaker, the voice pickup source is from the microphone.
• If no light effects happen, it means already connected.

Still having problems? Please contact our customer service team via
email: service@soundcore.com

Specifications

Power adapter for US &
Canada: BI24G-120200-AdU| Input: 100-240V~50/60Hz, 0.8A
Output: 12V 2A
---|---
Power adapter for EU:
BI24GH-120200-AdV| Input: 200-240V~50/60Hz, 0.4A
Output: 12V 2A
Power adapter for UK(GB):
BI24GH-120200-AdB| Input: 200-240V~50/60Hz, 0.4A
Output: 12V 2A
Input| 12V 2A
Power consumption| 24W
Length| 5m/16.4ft x2
Bluetooth range| 100m (Nil interference)

Troubleshooting

The light strip doesn’t work.| • Make sure to correctly connect the control box to the light strip and the power adapter.
---|---
Failed to connect this device to the app.| • Make sure to turn on Bluetooth on your smartphone or tablet.
• Turn the light strip off, then turn it on to try again.
• Keep the light strip 1m/3.28ft or closer to your smartphone.
Cannot sync with music or sounds.| • Keep the music source closer to the control box.
• Clean out the microphone on the control box.
Some LED beads do not light up.| • Please contact our customer service team.

Important Safety Instructions

Read all the instructions before using the product, refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the product.

1. Store the product in a cool and dry place.
2. Do not store the product in a hot or humid environment.
3. Keep out of the reach of children.
4. Do not touch the product for a long time when powered on.
5. Power off and unplug the adapter when not use for an extended period of time.
6. Do not connect the rope light to the supply while it is in the packing or wound onto a reel.
7. Do not use the rope light when covered or recessed into a surface.
8. Keep away from any sharp objects. Do not open or bend the rope light.
9. Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
10. Operating temperature should be between 0°C to 40°C.
11. Do not disassemble the product or make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
12. Do not clean the product with harmful chemicals or detergents.
13. Misuse, dropping or excessive force may cause product damage.
14. Do not subject the product to mechanical shock, crushing, or cutting.
15. Do not short-circuit the product or be short-circuited by other metal objects.
16. Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
17. Do not use the product that is damaged or modified. It may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
18. Do not connect the chain to the supply while it is in the packaging.
19. Have servicing performed by a qualified repair person using only identical replacement parts. Servicing is required when the apparatus has been damaged in any way:such as power supply or cord is damaged; liquid has been spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
20. Do not install this equipment near any heat sources or in a confined or building-in space such as a bookcase or similar unit, and remain in good ventilation conditions at an open site.
21. Only suitable for safe use in areas below 2000m above sea level. Suitable for safe use in tropical and non-tropical areas.
22. Protect the power supply or cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time.

WARNING: Use only power supplies/attachments/accessories specified by the manufacturer.
Use only adapters below by Dong Guan Royal Intelligent Co.,Ltd. according to different area.
Model(s) for US & Canada：BI24G-120200-AdU
Model(s) for EU: BI24GH-120200-AdV
Model(s) for UK(GB): BI24GH-120200-AdB

CE

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A3561 is in compliance with Directives 2014/53/EU.The full text of the EU
declaration of conformity is available at the following internet address:
https://www.soundcore.com/products
Maximum output power: 11.63 dBm
Frequency band: 2.4G band (2.402GHz-2.480GHz)

The product is not under the Article 2 “Definitions” for ‘Light source’, according to EU 2019/2020, because the x and/or y chromaticity coordinates does not fall in the range of ‘Light source’.

UK CA

This product complies with the radio interference requirements of the United Kingdom.
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A3561 is in compliance with Radio
Equipment Regulations 2017(RER 2017 (SI 2017/1206)).
The full text of the UK declaration of conformity is available at the following
internet address: https://www.soundcore.com/products

The following importer is the responsible party (contact for EU and UK matters)

ANKER TECHNOLOGY (UK) LTD
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA,
United Kingdom

Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany

Indoor use only.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

BLUETOOTH

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited. is under license. Other trademarks and trade names are those of their respective owners.

*Additional Legal Rights for Consumers For consumers, who are covered by consumer protection laws or regulations in their country of purchase or, if different, their country of residence, the benefits conferred by Soundcore’s Limited Warranty are in addition to
all rights and remedies conveyed by such consumer protection laws and regulations, including but not limited to these additional rights.
For FAQs and more information, please visit https://www.soundcore.com/

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

DOWNLOAD

SoundCore BeatLight B32 LED Light Strip A3561 User Manual – [Download PDF]

SoundCore BeatLight B32 LED Light Strip A3561 QSG – [Download PDF]

A3561 BeatLight B32 Declaration of Conformity – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>