SIGNATURE HARDWARE 944715 100W 1-Light Outdoor Pendant Instruction Manual
- October 31, 2023
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 944715 100W 1-Light Outdoor Pendant
Product Information
Product Name: WETHERBURN
SKU: 944715
Before You Begin
We recommend consulting a professional if you are unfamiliar with installing electric fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, countertop, or for personal injury during installation. Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage.
Getting Started
Ensure that you have gathered all the required materials that are needed for the installation.
Care and Maintenance
To clean, wipe with a damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol. Shut off the main power supply before cleaning the product or changing light bulbs. All glass is fragile, so use care when handling glass shades and bulbs.
Recommended Tools
- Mounting Bracket Support
- Screws Collar Loop (2)
- Short Machine Screws (2pcs)
- Wire Connector (3pcs)
- Quick Link (1pc)
Installation Instructions
- Shut off the power at the circuit breaker and remove the old fixture, including the crossbar.
- Attach the crossbar to the outlet box using the provided screws.
- Connect the screw collar loop with the chain by using the quick link.
If you have any additional questions or need further assistance, you can visit our Help Center at www.signaturehardware.com or contact us through live chat or by emailing [email protected].
BEFORE YOU BEGIN
- We recommend consulting a professional if you are unfamiliar with installing electric fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation.
- Observe all local plumbing and building codes.
- Unpack and inspect the product for shipping damage.
If any damage is found, contact our Customer Relations team via live chat at www.signaturehardware.com or by emailing [email protected].
GETTING STARTED
- Ensure that you have gathered all the required materials that are needed for the installation.
ADDITIONAL QUESTIONS?
- Still need help? Check out our Help Center at www.signaturehardware.com for product and warranty information, or contact us through live chat or by emailing [email protected].
CARE AND MAIN TENANCE
To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
CAUTION:
Shut off main power supply before cleaning product or changing light bulbs. All glass is fragile. Use care when handling glass shades and bulbs
RECOMMENDED TOOLS AND ACCESSORIES
OUTDOOR HANGING PENDANT
SAVE THIS MANUAL: RETAIN FOR CONSUMER’S USE.
READ THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING THE PRODUCT: FOR PRODUCT
OR INSTALLATIO QUESTIONS PLEASE CALL CUSTOMER. SERVICE AT 1‐800‐221‐3379
.
INSTALLATION
(FIG 1)
- Shut off the power at the circuit breaker and remove old fixture, including the crossbar.
- Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- Attach the cross bar (B) to the outlet box (A) (not supplied) using the 2 screws provided with the outlet box (A).
- CONNECTING THE WIRES Now connect the electrical wires as follows: Connect the smooth wire from the fixture to the black or red (lead) supply wire. Connect the ridged wire from the fixture to the white (neutral) supply wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to the crossbar using the green screw provided. Tuck the wire connections neatly into the ceiling junction box.
- Connect the screw collar L oop (D) with the chain (J ) by the quuick link (N) .
- Move up the canopy (E) to the ceiling and secured by the screw collar ring (F) to the screw sollar loop (D).
1.855.715.1800signaturehardware.com