Cricut Provo Craft 29-0033 Personal Electronic Cutter User Guide
- June 13, 2024
- Cricut
Table of Contents
Cricut Provo Craft 29-0033 Personal Electronic
Instructions
Welcome to the Circus™ Personal Electronic Cutter! This Quick Start Guide will help you get started. Plisse low at least 30-60 minutes to ge familiar with sour machine, Epoch to mace some mistakes as woulaom r vow need additiongelo meter to sour User Mound or vest www.cricut.com for the latest tips and techniques.
| A B C D E F | On – Button | Bouton de Marche |
|---|---|---|
| Keypad Overlay | Panna de Superposition du Clavier | |
| Cartridge | Cartouche | |
| Size Dial | Bisque de De affinition de la Tail e | |
| CUT Button n | Bouton de Coupe | |
| STOP Button | Bouton de Arrest |
Place your Circuit™ machine at least 6″ from the edge of your table to prevent it from tipping and causing possible injury.
Content may vary from illustrations
-
Press the On button and remove all cardboard inserts.
Apposes sur le Bouton de Marche et retires touts les insertions eon carton. -
Loosen the screw. Insert the green blade assembly into the cradle with the black arrow facing towards you. Tighten screw.
-
Insert cartridge
-
Plug in and press the On button again.
- Position Keypad Overlay.
- Metter le Panna de Superposition du Clavier.
- Remove plastic from Cutting Mat and press 6″× 12″ paper against it.
- Gently press mat against the roller bar.
- Press Load Paper key and choose letters/shapes/phrases.
- Select dial size.
- Press CUT button.
- Presser le bouton de CUT (COUPE).
- When finished, press Unload Paper key.
- Lift images off mat.
Look for additional updates to this guide on
www.cricut.com
Craft and Novelty, Inc. Spanish Fork, UT 84660, USA
www.provocraft.com ©2006 073805/037006_RW Part #
9900-0016