Schneider Electric LVS04038 Linergy DP-NSXm Installation Guide
- June 13, 2024
- Schneider Electric
Table of Contents
Schneider Electric LVS04038 Linergy DP-NSXm
Product Information
The Linergy DP-NSXm is a terminal used in electrical equipment and switchgear manufactured by Schneider Electric. It is designed to be installed in a PrismaSeT switchboard and is subject to IEC 61439-1 & 2 certification. The product is available in two variants: LVS04038 and LVS04039. It is part of the ComPact NSXm series and is compatible with both 3P (3-phase) and 4P (4-pole) configurations. Additionally, there is a Vigi variant available for the ComPact NSXm 160 model.
Product Usage Instructions
- Ensure that only qualified personnel install, operate, service, and maintain the Linergy DP-NSXm terminal.
- The Linergy DP-NSXm terminal should only be fitted in a PrismaSeT switchboard. Do not attempt to install it in any other switchboard.
- Refer to the instructions provided in the user manual (not included in this extract) for detailed guidance on fitting the Linergy DP-NSXm terminal in a PrismaSeT switchboard.
- Follow the specified torque values when tightening the screws on the Linergy DP/NSXm terminal. The torque value for ComPact NSXm models is 9 N.m.
- For ComPact NSXm + Vigi models, ensure that the specified torque value of 9 N.m is applied for tightening the screws.
- For proper installation, refer to the diagram labeled “A’, ‘B’, ‘C’, ‘D’, ‘E’ and ‘SeT G’, ‘SeT P’ included in the user manual.
- The Linergy DP/NSXm 160A terminal has a rated cross-section for the terminal connection. The minimum cross-section allowed is 1 mm2 and the maximum cross-section is 16 mm2.
- For any updates or changes to standards, specifications, and designs, please consult the manufacturer’s website or contact Schneider Electric for confirmation.
Please note that this response is based on the provided text extract from the user manual. For complete and accurate information, refer to the full user manual provided with the product.
PLEASE NOTE
Electrical equipment should be installed, operated, serviced, and maintained
only by qualified personnel. No responsibility is assumed by Schneider
Electric for any consequences arising out of the use of this material.
PrismaSeT switchboards equipped with . the Linergy busbar connection system
and Schneider Electric switchgear are subject to IEC 61439-1 & 2
certification. The instructions in this document describe how to fit Linergy
in a PrismaSeT switchboard.
The installer is fully liable if it is fitted in any other switchboard.
Schneider Electric Industries SAS
35, rue Joseph Monier 92500 Rueil-Malmaison France
www.se.com
MFR77554B-00
As standards, specifications and designs change from time to time, please ask for confirmation of the information given in this publication.
Impression :
Format de pliage : 210 x 297 mm
This document has been printed on ecological paper.
Schneider Electric Limited
Stafford Park 5 Telford, TF3 3BL United Kingdom
www.se.com/uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>