OneTemp Tempmate S1 Pro Single-Use Temperature Data Logger Instruction Manual
- June 13, 2024
- OneTemp
Table of Contents
Tempmate S1 Pro Single-Use Temperature Data Logger
Manual
The configuration tool manual guides the user on how to use the tool for
generating configuration for their respective devices.
The configuration tool supports tempmate.®-S1 PRO T and tempmate.®-S1 PRO TH.
Features
- Configuration Generation
- Supports S1 Pro T and S1 Pro TH
- TXT Config
- Time-zone selection
- Temperature Unit Selection (Celsius & Fahrenheit)
- Schedule Start Support
- System Sync Time Enabled
- Temperature & Humidity Support
Requirements
NET Framework 4.6 and above
Tempmate.®-S1 PRO Models
One-way| |
---|---|---
Temperature| |
Rel. humidity| |
Device Description T
Device Descriprion TH
Configuration Tool Description
- Device: This option allows you to select the device for which the configuration needs to be generated. It supports tempmate.®-S1 PRO T & ternpmate.®-S1 PRO TH.
- Log Interval: This option allows you to set the duration of the log interval for the device. The device will record the data requ- larly after every interval. The default log interval is 10 minutes.
- Time-zone: Select the respective time zone. By default, the time zone is UTC+00:00.
- Run Time: Displays the runtime of the device based on the log interval you choose. This is an automatic calculation.
- Temperature Unit: This option allows you to select the temperature unit. You can choose between Celsius or Fahrenheit.
- Stop Mode: Select the stop mode of your device. You can choose between stop by button or an automatical stop when the device memory is full.
- Start Delay: Select a time after which the logger will automat- ically start recording after the actual start. You can choose between 3 options. No Delay: The device starts recording im- mediately after the start. Delay: You enter a time (in minutes) after which the device will automatically start recording. Scheduled Time: You select a date & time at which the device should start recording.
- Delay Time: This option is only available if the Delay’ option has been selected in the start delay menu. Enter your desired delay in minutes in this field.
- Scheduled Start (Date): This option is only available if the “Scheduled Time” option has been selected in the start delay menu. Enter your desired date for a scheduled start here.
- Scheduled Start (Time): This option is only available if the “Scheduled Time’ option has been selected in the start delay menu. Enter your desired time for a scheduled start here.
- Device Name: Choose a description for your device.
- Temperature Mode: Choose the temperature modes for which you want to set thresholds & alarms (Max. 3 High and 3 Low treshholds).
- Temperature Threshold: Set you temperature and/or humidity threshold for which the alarms should get triggered and recorded.
- Alarm Type: Choose between Single or Cumulative alarm types.
- Alarm Delay: Select a time period (in minutes) that may elapse before an alarm is triggered if your alarm limits are exceeded.
- Generate Config File: Press this button once your configuration iS complete. It will then be automatically transferred to your device and it is immediately ready for use.
- Progress Bar: This loading bar shows you the progress of the transfer of the configuration to your device. Please do not unplug the logger from the PC until this bar has finished loading and you have received confirmation of the successful save operation.
Contact Information
Do you have any questions? Please
contact us – our experienced team will be happy to support you.
1300 768 857
www.onetemp.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>