OneTemp MX2202 Pendant Water Temperature Light Bluetooth Data Logger User Manual
- June 14, 2024
- OneTemp
Table of Contents
MX2201/MX2202 Mounting Boot (BOOT-MX2201-2202)
Manual
Installing the Logger in the Mounting Boot
- Holding both the boot and the logger upside down, insert the logger mounting tab into the boot as shown
- Insert the other logger mounting tab into the boot, making sure the logger is securely seated in the boot as shown
Mounting the Logger in the Boot to a Pipe
Use two of the included zip ties to mount the logger in the boot to a small pipe as shown
Use one of the included zip ties to mount the logger in the boot to a large pipe as shown
Mounting the Logger in a Boot to a Flat Surface
Use two #8 screws (not included) to mount the logger in the boot to a flat surface. Do not overtighten the screws.
For detailed mounting and deployment guidelines, refer to the logger manual. Go to www.onsetcomp.com/support/manuals/21536mx2201-mx2202-manual or scan the code at left.
1300 768 887
www.onetemp.au
Read User Manual Online (PDF format)
Loading......