exodraft RS009-4-1 Smoke Extractor RS User Guide
- June 13, 2024
- exodraft
Table of Contents
Exhaust fan/smoke extractor
RS009-4-1 Smoke Extractor RS
The Exodraft RS exhaust fan is a specially designed one Exhaust fan with a
horizontal discharge. The exhaust fan is mounted on top of the chimney a
negative pressure in the flue gas pipe and in the chimney. With its axial
wheel it is particularly suitable for all types of exhaust gases or hotter
Air. Thus is the Exhaust fan RS from Exodraft for all species from fuels
suitable. Exodraft’s exhaust fans are designed for temperatures up to 250 °C
in continuous operation made from cast aluminum. All screws and bolts are made
of stainless steel.
The motor is a temperature-resistant, encapsulated asynchronous motor with
closed and maintenance-free Ball bearings. It sits outside the air volume
flow. A special cooling wing and cooling air slots ensure constant cooling of
the engine. The cable is heat-resistant, strain-relieved and protected on the
outside with an armored hose.
These measures lend to that Exhaust fan a high Operational reliability and a
long service life Lifespan. The exhaust fan can be opened so that the chimney
sweep can easily clean the chimney can. The discharge opening is equipped with
a stainless steel grille as finger and bird protection.
Technical data
| 1. Connection cable | 5. Cooling plate |
|---|---|
| 2. Top | 6. Support plate |
| 3. Engine | 7. Hinges |
| 4. Axial wing | 8. Locking screws |
| Typ | rpm |
| --- | --- |
| RS009-4-1 | 1400 |
| RS012-4-1 | 1400 |
| RS014-4-1 | 1400 |
| RS016-4-1 | 1400 |
| RS255-4-1 | 1400 |
| RS285-4-1 | 1400 |
*Power consumption at an ambient temperature of 20°C The exhaust fan is continuously adjustable in all versions.
Protection class IP 54, insulation class F
Performance charts
RS009 bis RS016
RS255 und RS285
Sound data
Lw (dB)
| 125 Hz| 250 Hz| 500 Hz| 1000 Hz| 2000 Hz| 4000
Hz| 8000 Hz| Lp dB (A)
---|---|---|---|---|---|---|---|---
Typ
RS009-4-1| 54| 50| 47| 43| 38| 31| 25| 21
RS012-4-1| 64| 60| 55| 52| 48| 42| 34| 30
RS014-4-1| 75| 69| 65| 62| 57| 51| 44| 41
RS016-4-1| 81| 76| 72| 69| 64| 58| 52| 47
Tolerance +/- 3 dB
Lw = sound power level dB (reference: 1 pW)
Lp = sound pressure level dB (A) at a distance of 10 m from the fan with
hemispherical sound distribution
Lp (5m) = Lp (10m) + 6dB
Lp (20m) = Lp (10m) – 6dB