MeTra 95-5861 Ford Kit Instruction Manual
- June 13, 2024
- Metra
Table of Contents
MeTra 95-5861 Ford Kit
Ford Transit Connect 2021-Up
Visit MetraOnllne.com for more detailed inlormation about the product and up-
to-date vehicle specific applications
KIT FEATURES
- ISO DDIN radio provision
WIRING & ANTENNA CONNECTIONS (sold separately)
- Wiring Harness: Visit metraonline.com for audio/ video and steering wheel control interface options.
- Antenna Adapter: Not required
TOOLS REQUIRED
- Panel removal tool
- Torx drivers
- Socket wrench
KIT COMPONENTS
- A) Radio trim panel
- B) Radio brackets
- (C) Hood
- D) Trim panel
- E) #8 x 3/8″ Truss-head Phillips screws (3)
- F) #8 x 3/8″ Pan-head Phillips screws (4)
- G) White plastic panel clips (4)
- H) Metal panel clips (6)
- I ) Hazard switch harness
- Attention! With the key out of the ignition, disconnect the negative battery terminal before Installing this product.
- Ensure that all Installation connections are secure before cycling the ignition to test this product.
DASH DISASSEMBLY
- Unclip and remove the passenger airbag light at the bottom of the radio panel. (Figure A)
- Remove (2) T-20 Torx screws behind passenger air bag light. (Figure B)
- Unclip and remove the trim panel on the top of the radio panel. (Figure (C)
- Remove (2) 7 mm bolts under trim panel on top of radio panel. (Figure D)
- Remove (5) T-20 Trox screws securing the radio chassis to the sub dash then remove the chassis. (Figure E)
- Remove the radio chassis bracket from the sub dash. (Figure F)
- From the factory radio panel:
- Unclip and remove the a/c vents. (Figure G)
- Remove (4) Philips screws securing the pocket then remove the pocket. (Figure H)
KIT PREPARATION
To the 95-5861 radio panel
- Secure the top panel using the (3) #8 x 3/8″ Truss head Phillips screws provided .. (Figure A)
- Secure the factory pocket using (4) #8 x 3/8″ Pan-head Phillips screws provided. (Figure B)
- Snap in the a/c vents (Figure C)
- Install the (6) factory panel clips or use the (6) metal panel clips provided. (Figure D)
KIT ASSEMBLY
- Attach the radio brackets to the radio using screws supplied with the radio. (Figure A)
- Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
- Secure the radio to the sub-dash using the factory mounting screws.
- Install the (4) plastic panel clips to the radio trim piece. (Figure B)
- Connect the 6-pin side of the hazard switch harness to the 95-5861 dash panel and the 4-pin side of the harness into the factory radio panel plug
- Re-assemble the dash in the reverse order of disassembly using the new dash panel.
- Lastly, snap the radio trim panel into the dash panel. (Figure (C)
- Having difficulties? We’re here to help.
- Contact our Tech Support line at: 386-257-1187
- Or via email at: techsupport@metra-autosound.com
- Tech Support Hours (Eastern Standard Time)
- Monday – Friday: 9:00 AM – 7:00 PM
- Saturday: 10:00 AM – 7:00 PM
- Sunday: 10:00 AM -4:00 PM
KNOWLEDGE IS POWER
- Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
- Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow..
- NetraOnllnt.com
Documents / Resources
|
MeTra 95-5861 Ford
Kit
[pdf] Instruction Manual
95-5861 Ford Kit, 95-5861, Ford Kit, Kit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>