innex DC500 4K Foldable Document Camera User Guide
- June 13, 2024
- innex
Table of Contents
DC500
4K Visualizer / Document Camera
Quick Start Guide
Getting started with DC500
- Pull the camera head up from its base plate in the steps shown.
- Plug in the USB cable and attach the cable clip to the camera arm.
- Adjust the camera head until it is horizontal. Fully extend the arm to capture A3-sized content. After adjusting the camera to the desired position, press the focus button to trigger focus if auto-focus mode is off.
Innex DC500 is a 2-in-1 document camera and webcam that features crystal clear
4K resolution, a noise-cancelling microphone, smart autofocus, and auto-
rotation with its built-in G-sensor. It works out of the box with most UC
software, such as Zoom, Google Meet, Microsoft Teams, Skype, and more. Ideao’s
complimentary software can help you enhance your lessons and presentations.
Download Ideao VisualCam and the IdeaoCam Chrome extension for digital zoom,
snapshot, recording, annotation, Google account integration, and more. For
more information please visit:
Ideao VisualCam
https://funtechinnovation.com/software/ideao-visualcam/
IdeaoCam
https://funtechinnovation.com/software/ideaocam/
Package Contents
Auto Focus
Turn off Auto Focus mode when using the DC500 as a document camera for still objects such as document. When Auto Focus is off, auto focus is triggered only when the focus button “ ” is pressed.![innex DC500 4K Foldable Document Camera
- camera3](https://manuals.plus/wp-content/uploads/2023/09/innex-DC500-4K-
Foldable-Document-Camera-camera3.jpg)
Turn on Auto focus mode when using the DC500 as a webcam to always keep your face in focus. Or as a document camera that needs to capture dynamic movements.![innex DC500 4K Foldable Document Camera - camera5](https://manuals.plus/wp-content/uploads/2023/09/innex-DC500-4K-
Foldable-Document-Camera-camera5.jpg) DC500 Overview
a. Micro USB Port
b. Auto Focus On/Off
c .Focus / Rotate Button
Press once: trigger focus once
Long press: rotate image 0/180°
d. LED Light Button
Press to turn on LED light. Three levels brightness.
e. AI Noise Reduction On/Off
f. Auto Rotate 180° On/Off
g. LED Indicator
h. Built-in Microphone
i. Camera
j. LED Light
k. Flip Camera Head 0°~180°
l. Base Plate
m. Bolts
AI Noise Reduction
The AI-powered noise reduction mode is designed to filter out background
noise, providing clear audio for effective communication and improving the
quality of remote presentations and meetings. Auto Rotate 180°
(Use DC500 as a webcam)
When the Auto-Rotate mode is off, you can long press the button to trigger 180° rotation.If the image appears mirrored, please check the video settings in the video conference software you are using.
When the Auto-Rotate mode is on and you flip the camera head to the front- facing position, the Auto-Rotate mode will automatically rotate the view by 180°.
Caution
- Be careful not to pinch your fingers when moving the arm.
- Do not hold the arm or camera head when carrying the product.
- Avoid any impact to the camera head.
Specifications
Camera
Max. Output Resolution & Frame Rate| 3840×2880 @15fps (To Capture A3 Image)
3840×2160 @30fps
1920×1080 @60fps
---|---
Video Compression| MJPG / YUY2
Focus| Dual autofocus mode: On demand / Continuous
Minimum Focus Distance| 10cm / 3.9″
Maximum Shooting Area| 420x297mm / 16.5×11.7″ (A3 size)
Viewing Angle| 82°
Sensor| 13 Megapixel 1/3″ CMOS
F-Number| F2.2 ± 5%
G-Sensor| Yes
LED Lighting| Yes, 3 level
Pan / Tilt / Zoom| Yes, 10 digital zoom by software
Image Rotation| 0° / 180° / Auto
Support Power Line Frequency| 50/60 Hz
Micorphone
Built-in Microphone | Omnidirectional Microphone |
---|---|
Microphone Specifications | Sensitivity S 94dB SPL @1KHz Min-29 Typ-26 Max-23 |
dBFS SNR 64dB
Voice Technology| Noise reduction and voice enhancement technology
Safety Information
Federal Communications Commission (FCC) Statement. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Others
Connectivity | USB Type-C to Type A 2.0 |
---|---|
Powered By | USB 2.0 5V/500rnA |
Protocol | UVC; UAC; Plug-and-play |
Operating System | Windows 11, 10 |
macOS 10.15 or above
Chrome OS
Product Dimensions| Extended (LxWxH):
397x 51 x337 mm/ 15.6×2 x13.3″
Folded (LxWxH):
197x 51 x20 rnrn/ 7.8x 2 x 0.79″
Net Weight| 409g/ 14.4 oz
Package Contents| DC500
Quick start guide,
USB cable (C to A) ,
USB C to A Adapter
Carry bag
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
APEX CE SPECIALISTS LIMITED
89 PRINCESS STREET, MANCHESTER, M1 4HT, UK
APEX CE SPECIALISTS LIMITED
UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK,
NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
References
- Ideao VisualCam Document Camera Software - FunTech Innovation
- IdeaoCam Document Camera Software - FunTech Innovation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>