BORA PM-900 Workbench Caster Ket Set Instruction Manual
- June 13, 2024
- BORA
Table of Contents
BORA PM-900 Workbench Caster Ket Set
Caution: Read all instructions carefully.
SAVE THESE INSTRUCTIONS: Refer to them often and use them to instruct others.
Assembly Instructions
-
Disassemble the mechanism from the mounting bracket – take note of where the washers and nylon spacers are placed for easy reassembly.
-
Position the bracket so that the bottom edge of the bracket is 1-3/4″ (44.5mm) from the floor. With the bracket placed correctly – mark the mounting holes onto the bench with a pencil or marker. Now the holes are marked pre-drill the holes with a 3/16″ drill bit. You only need to go into the material – 5/8in (16mm).
-
Attach the brackets to the bench with the screws provided and reassemble the lifting mechanism to the brackets. Tighten the bolts until the nut is snug against the side of the bracket, be careful not to overtighten as it will cause the brackets to bend.
-
You are ready to roll!
ID | Part No. | Description | Qty. |
---|---|---|---|
? | M2036 | Mounting bracket | 4 |
? | M2037 | Foot Lever | 4 |
? | M2038 | Swivel Plate | 4 |
? | 5206-N | Caster – Roues | 4 |
? | M3710 | Hardware Pack | 1 |
One Year Limited Warranty
Warrantor warrants to the original purchaser that the Bora PM-900 Workbench Caster Kit will be free from defects in materials and workmanship under normal use and service for a period of one (1) year from the date of original purchase.
The obligation of this Warranty is limited to repair or replacement, at our option, of components which prove defective under normal use.
Any product or component claimed to be defective should be sent during
Warranty period, postage prepaid to Affinity Tool Works, 1161 Rankin Drive,
Troy, Ml 48083, Attn: Warranty Department, together with a copy of your
original dated sales receipt.
Call for authorization number before sending.
This warranty is in lieu of all other express warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS OR LIABILITIES, SHALL BE LIMITED IN DURATION TO THE ONE YEAR PERIOD OF THIS LIMITED WARRANTY. NO AGENT, REPRESENTATIVE, DEALER, OR EMPLOYEE OF THE COMPANY HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THIS WARRANTY.
This Warranty shall not apply to any product or component which in the opinion of the Warrantor has been modified or altered in any way, damaged as a result of an accident, misuse or abuse, or loss of parts. In no case shall the Warrantor be liable for any special or consequential damages, or any other costs or warranty, expressed or implied, whatsoever. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
88-588-0395 .www.boratool.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>