aos bath ELJH Electric Heater Installation Guide
- June 13, 2024
- aos bath
Table of Contents
aos bath ELJH Electric Heater
Product Information
The product is a Gen 1 Electric Heater ELJH designed for installation in false ceilings. It requires a power source of a minimum of 15A. The heater has a space allowance requirement of 250 mm for maintenance. It includes various components such as a relief valve, hot/cold pipe, drain pipe, drain tube, double check valve, stop valve, access panel, and an Omega bracket. The heater comes in different sizes ranging from 30 liters to 100 liters, with corresponding dimensions and weights.
Product Usage Instructions
Installation
SPECIFICATIONS
- Ensure that the power source is a minimum of 15A. Mount the heater in a false ceiling, following the BTO height requirement guidelines.
- Use the provided Omega brackets to secure the heater to the ceiling.
- Position the drain pipe according to the specified requirement (heater height + 60 mm). Install the double-check valve and stop valve in the appropriate locations.
- Attach the hot/cold pipe and drain tube as indicated in the installation diagram.
- Connect the electric wires to the respective terminals (Live: brown, Earth: green/yellow, Neutral: blue).
- Mount the wall brackets included with the heater for added stability.
- Ensure that the access panel is easily accessible and provides a space allowance of 250 mm for maintenance.
False Ceiling Requirements
- The false ceiling height should be equal to the heater height + 80 mm.
- If using Omega brackets, the false ceiling height can be reduced by 30 mm.
- Size and Dimensions Choose the appropriate size of the heater based on your needs (30 lit, 40 lit, 50 lit, 80 lit, or 100 lit).
- Refer to the respective length, width, height, and weight measurements provided in the table. Light Indicator
- The heater is equipped with a light indicator to indicate its operational status.
Note: It is recommended to consult an In-Charge Electrician or a qualified installer for proper installation and to comply with local electrical and safety regulations.
SIZE| Length (mm)| Width (mm)| Height (mm)|
Weight (kg)
---|---|---|---|---
30 lit| 605| 360| 360| 17
40 lit| 710| 360| 360| 19
50 lit| 830| 360| 360| 21
80 lit| 860| 463| 463| 31
100 lit| 1025| 463| 463| 35