R V R TX30K-KLC TX-K-KLC SERIES FM Stations User Manual
- June 13, 2024
- R V R
Table of Contents
R V R TX30K-KLC TX-K-KLC SERIES FM Stations
Product Information
| Model | Description |
|---|---|
| TX30K-KLC | 30.000W Liquid cooled system. |
Features:
- Maximum modularity and scalability of the system from economical compositions single exciter to redundant custom compositions double exciter.
- Power & Quality: With the family of RVR’s liquid transmitters based on the U-KLC series, it is possible to realize compact equipment up to 20kW, with high energy savings thanks to the use of high efficiency pumps and no forcing ventilation. The Cooling system is with low pressure circuit and double pump in automatic switching and diagnostics.
- Reliability & Redundancy (business continuity): Extremely safe operation: by pressing the emergency button, the power supply line to the various relay switches is cut while remaining exciters operational.
- User-friendly features: user-friendly software and a simple, intuitive HM interface let you easily set up and control all machine operating parameters.
- Ease of Maintenance: Accessibility and ease of maintenance are ensured by advanced modular engineering concepts incorporated in the transmitter and by its lightweight components. Better cleaner work environment and low environmental noise.
- Remote Control: The device comes with a powerful, complete telemetry system.
Product Usage Instructions
To use the TX30K-KLC series transmitter, follow these instructions:
- Ensure the transmitter is properly connected to the power supply.
- Use the user-friendly software and the simple, intuitive HM interface to set up the machine operating parameters according to your requirements.
- For maintenance purposes, ensure easy accessibility to the transmitter and its lightweight components.
- In case of emergency, press the emergency button to cut the power supply line to the various relay switches while keeping the exciters operational.
- For remote control, utilize the powerful telemetry system provided with the device.
MODEL
TX30K-KLC
ORDERING INFORMATION
TX30KSS/60D216J
Modular transmitter, 30kW (composed of
HC-CCU + 6x PJ5000U-KLC + 2x PTX30DDS)
FEATURES
- HARDWARE FEATURES: Maximum modularity and scalability of the system from economical compositions “single exciter” to redundant custom compositions “double exciter”.
- POWER & QUALITY: With the family of RVR’s liquid transmitters based on the U-KLC series, is possible to realize compact equipments up to 20kW, with high energy savings thanks to the use of high-efficiency pumps and no forcing ventilation. The Cooling system is with low pressure circuit and double pump in automatic switching and diagnostics.
- RELIABILITY & REDUNDANCY (business continuity): Extremely safe operation: by pressing the emergency button is cutting the power supply line to the various relay switches while remaining exciters operational.
- USER-FRIENDLY FEATURES: user-friendly software and a simple, intuitive HM interface let you easily set up and control all machine operating parameters. user-friendly software and a simple, intuitive HM interface let you easily set up and control all machine operating parameters.
- EASE OF MAINTENANCE: accessibility and ease of maintenance are ensured by advanced modular engineering concepts incorporated in the transmitter and by its lightweight components. Better cleaner work environment and low environmental noise.
- REMOTE CONTROL: the device comes with a powerful, complete telemetry system.
TX30KSS/60D216J
SPECIFICATION
| Parameters U.M. Value | Notes |
|---|
GENERALS
RF Output power| kW| 30|
Frequency range| | 87.5 – 108 MHz programmable in 1,10 or 1000 KHz
steps|
Frequency stability| ppm| ±1|
Nominal frequency deviation| | ±75 KHz (peak)|
Maximum frequency deviation| | ±100 KHz (peak)|
Class of emission| | 180KF8E|
Stereo transmission| | Acc. To ITU-R / Rec. 450 (Pilot tone)|
RF output impedance| | 50 Ω, Unbalanced|
RF output connector| | 3-1/8” EIA Flange|
VSWR| | 1.41:1 with automatic fold-back at higher VSWR|
Frequency control| | Synthesizer µ processor control|
Modulation capability| | ±150 KHz|
Modulation mode| | Mono, Stereo, Multiplex, SCA, RDS, DARC, Aux|
Pre-emphasis Mode| | 0/50 (CCIR) µs, 75 (FCC) µs|
Asynchronous AM S/N Ratio| | ≥ 70 dB unweight, referred to 100% AM
modulation at 400 Hz Pre-emphasis an| d without FM modulation
Synchronous AM S/N Ratio| | ≥ 55 dB, reference to 100% AM modulation at
400 Hz, 50 µs Pre-emphasis with| FM modulation at 75 KHz of deviation
Harmonics suppression and Spurious| dB| Typically 85|
Overall efficiency| %| Typically 70/72|
RF Harmonics| | Exceeds ETSI/CCIR/FCC requirements|
RF Spurious| | Exceeds ETSI/CCIR/FCC requirements|
Max Frequency Tolerance| | As per ITU (R)|
Analogue Input Level ±75 Khz (peak) deviation| | -6 dBu – +6 dBu at 1
Khz, 0 dBu|
Digital Input Level ±75 Khz (peak) deviation| | -20.0 dBFS – 0 dBFS
(adjustable) at 1 Khz|
MONO OPERATION
S/N ratio| | > 90dB (typical 92dB), 75KHz deviation (30 Hz to 15 KHz
base band) rms, unwe| ighted
Total Harmonic Distortion + Noise| %| Better than 0.15|
nter Modulation Distortion SMPTE| | Better than 0.20% (60 Hz / 7 KHz,
4:1, +4|
Frequency Response| | ±0.2dB (30Hz – 15Khz)|
Audio Input Impedance| | 600 Ω balanced or 10 kΩ unbalanced|
MPX OPERATION
S/N ratio| | >90 dB, 75 KHz deviation rmd, unweight|
Total Harmonic Distortion + Noise| %| <0.02%|
Inter Modulation Distortion SMPTE| | <0.02% 60 hz / 7 khz, 4:1, +4dbu|
Frequency Response| | ±0.3dB, 30 Hz to 100 KHz|
Transient Intermodulation Distortion| | 0.03%, 2.96 KHz square wav end
14 KHzsine wave|
STEREO OPERATION
Audio Input Impedance| | 2 K ohm or more|
Stereo FM S/N Ratio unweighted| | >84 dB, 30 Hz to 15 KHz deviation (L
or R), rms|
Stereo Separation ((Sine wave))| | ≥ 60 dB (30 Hz – 15 KHz)|
L inear Cross Talk| | Better than 50 dB, referred to 100%
modulation (30 Hz to 15 KHz)|
Non-linear Cross Talk| | Better than 50 dB, referred to 100%
modulation|
Total Harmonic Distortion + Noise (L or R)| | <0.02%, 60 Hz / 7 KHz,
4:1, +4dBu|
Inter Modulation Distortion SMPTE (L or R)| | ±0.2 dB, 30 Hz – 15 Khz|
Digital Input Impedance| | 110 Ω|
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
R.V.R. Elettronica S.r.l.
Via del Fonditore 2/2 c
40138 Bologna – Italy
Phone +39 051 6010506
info@rvr.it
www.rvr.it
Phone +39 0516010506
Fax +39 0516011104
sales@rvr.it
www.rvr.it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>