pelsee PEA-ZD01 Peacall Dash Cam User Manual

pelsee PEA-ZD01 Peacall Dash Cam

Peacall-ZD01 Service Email:hongjitai2019@outlook.com

Preface

Thank you for purchasing the Peacall Dash Cam. This user manual provides detailed information on how to use and operate the dash cam, precautions, technical specifications, and more. Please read this manual carefully before use and fully understand it. Keep this manual in good condition to ensure long-term usage.
The Peacall Dash Cam complies with the certification indicators of FCC&CE and other authoritative organizations to ensure customer safety.

Warm Tips

• When switching on the power supply, the dash cam automatically powers on and starts recording. When powered off, it will immediately shut down.
• The first time using this dash cam, we recommend formatting the memory card through the machine.

One. Appearance and fundamental function

App Download and Installation

RoadCam APP download

Android and iPhone phones can scan the QR code above to directlydownload and install the ‘RoadCam’ APP or download ‘RoadCam’ from iOS App Store or Google Play Store.

WiFi connecting
Power on the dash cam, and open the settings on your mobile phone to connect the WiFi.

Default WiFi Name: Pea-ZD01-XXXX(generated the last four bits randomly)
Default Password: 12345678
Note : You must open the APP’s location and the permission to access the image.

Then open RoadCam APP to connect the dash cam.
(iPhone iOS example) Notices: When the Android system mobile phone is connected to the dash cam’s WiFi, it will not be able to use network data. The link must be disconnected manually if you need to use the mobile phone’s network data. Don’t set Android system phones to connect to the WiFi automatically.

Install instruction

The installation is simple, as shown in the figure below:

1. Paste electrostatic sticker: Wipe the glass and then paste the electrostatic sticker;
2. Paste the machine: First, connect the machine to the power supply, use the APP to view the video, and ensure that the machine is in the correct direction. Then tear off the lens protective film and 3M adhesive protective sticker, and paste the machine on the electrostatic sticker. Don’t let the electrostatic sticker block the lens;
3. Complete the wiring: The crowbar can assist with the wiring, and the wiring diagram is shown below;
4. Adjust the machine angle to complete the installation: Preview the video through APP. After adjusting the video angle, the entire installation is finished.

APP basic function

1. Real-time preview: Check the recorded video in the dash cam by connecting to the WiFi. You can switch different cameras (optional);
2. Photo: Check and download images;
3. Video files: Check and download video files;
4. Setting: Set up the dash cam from the RoadCam WIFI APP.

Preface

Thank you for purchasing this dashcam. We hope it may bring a better and more colorful life to you.
This user manual will detail how to use and operate, precautions, technical specifications, and so on. Please read this manual carefully before use and fully understand it. Please keep this manual in good condition. We hope this product can meet your requirements and serve you for a long time!
This product complies with the certification indicators of FCC&CE and other authoritative organizations to ensure customers’ safety.

Warm tips:

1. When switching on the power supply, the dash cam automatically powers on and starts recording; when powered off, it will immediately shut down.
2. The first time using this dashcam, we recommend you format the memory card through the machine.

Appearance and fundamental function

1. Camera: Recording Video.
2. Loudspeaker: Play Audio.
3. MicroSD card slot: Default a 64G microSD card exists.
4. USB Port: Power port.
5. Status indicator: None / Red / Green (blinking when recording).
6. Power: Restore the factory settings.

App Download and Installation

RoadCam APP download

Android and iPhone phones can scan the QR code above to directly download and install the ‘RoadCam’ APP or download ‘RoadCam’ from iOS App Store or Google Play Store.

WiFi connecting

• Power on the dash cam, and open the settings on your mobile phone to connect the WIFI.

  • Default WiFi Name: Pea-ZD01-XXXX(generated the last four bits randomly) Default Password: 12345678
    Note : You must open the APP’s location and the permission to access the image.

• Then open RoadCam APP to connect the dash cam.
  (iPhone iOS example)
  Notices : When the Android system mobile phone is connected to the dashcam’s WiFi, it will not be able to use network data. The link must be disconnected manually if you need to use the mobile phone’s network data. Don’t set Android system phones to connect to the WiFi automatically.

Install instruction

The installation is simple, as shown in the figure below:

• Paste electrostatic sticker: Wipe the glass and then paste the electrostatic sticker;
• Paste the machine: First, please connect the machine to the power supply, use the APP to view the video, and ensure that the machine is in the correct direction. Then tear off the lens protective film and 3M adhesive protective sticker, and paste the machine on the electrostatic sticker. Don’t let the electrostatic sticker block the lens;
• Complete the wiring: The crowbar can assist with the wiring, and the wiring diagram is shown below;
• Adjust the machine angle to complete the installation: Preview the video through APP. After adjusting the video angle, the entire installation is finished.

APP basic function

1. Real-time preview: Check the recorded video in the dashcam by connecting to the WiFi. You can switch different cameras(optional);
2. Photo: Check and download the images;
3. Video files: Check and download the video files;
4. Setting: Set up the dashcam from the RoadCam WIFI APP.

Parameters

Exposure

| +2.0, +1.7, +1.0, +0.7, +0.3, 0,

-0.3, -0.7, -1.0, -1.7, -2.0

Screen| No screen
Recording mode| Recording; loop recording
Picture format| JPEG
Video format| Mp4

Memory card

| MicroSD(Class 10,U1 above),

MAX up to 128G

Power| ACC
Mic| Built-in
Loudspeaker| Built-in
Language| English

OS

| Windows XP/7/8/10 SP3/Vista and Mac

10.5 or above

Work Temperature| -20℃～+70℃
Storage Temperature| -40℃～+80℃
ROM| 1GB

FAQ

Under normal operating conditions, if the dash cam goes wrong, please refer to the following solutions:

• Record video is abnormal
  Check the MicroSD card to see whether there is enough space. You can format the MicroSD card.

• When recording the video, the dashcam automatically stops.
  Due to the massive UHD video data, please use a high-speed MicroSD card (above C10 level) that matches SDHC.

• The image is hazy
  Check whether the lens has dirt/ fingerprint; before taking a recording, please clean the lens.

• The image is very dark when recording the sky and water surface.
  It will affect the automatic exposure function in the big contrast scene.

• Downtimes
  When there is downtime, Please power down and reconnect the power. If the problem still exists, you can long press the power button on the side of the machine for 10 seconds to restore the factory settings

FCC Note

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>