Sanjiao Electronic Quve-231 Smart WiFi Power Strip User Guide
- June 13, 2024
- Sanjiao Electronic
Table of Contents
SMART WIFI POWER
STRIP
USER GUIDE
Quve-231 Smart WiFi Power Strip
PARAMETER:
Model: Quve-231
Rated Voltage:100-240VAC
Max. Current: 15A
Wireless Standard: Wi-Fi 2.4Ghz
Install Smart Life App into smart phone or tablet device. Or scan the QR code,
download and install into smart phone or tablet device.
https://smartapp.tuya.com/smartlife
Smart Life app Download QR Code
Connection way 1- WiFi
-
Plug in and power on.
-
Set up
Press and hold the master button for about 10 seconds until the WiFi LED flashes rapidly. -
Select add device on Smart Life App
-
Select device “Power Strip(WiFi)”
-
Select a 2.4GHz network and input your password.Tap “Next”
-
The app will scan for device. Please wait for the device to add automatically. The process may take as long as 30 seconds.
-
After appearing“Added successfully”It means the connect is complete and your device will be listed in your App.
-
Your WiFi power strip device is configured successfully.Press on the iron of button,turn them on/off.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum 20cm distance between the
radiator and your body: Use only the supplied antenna.