ATLASTAND MTS-213 Projector Screen User Manual

**ATLASTAND**
MTS-213 Projector Screen
User Manual
MTS-213

SAFETY INSTRUCTIONS

CAUTION!
Keep this device away from rain and moisture!
For your own safety, please read this user manual carefully before you initial start-up.

Operations:

1. Description of the fixture

Installing

Choose a suitable place for installation, open the tripod feet first, pull out the upper bar to a suitable height and lock it, hang the pulling rod above the gooseneck and adjust the screen height, then finally fix/lock it at a satisfying position which you want. After using, release the screen and put it back into the housing.

USEFUL INSTRUCTIONS

a. The tripod legs should be placed steadily.
b. When adjusting the height of the screen should move the upper bar slowly and carefully.

WARNINGS

a . The screen can not be folded. Do not use fingers or hard objects to touch the screen surface. Do not splash the milk, fruit juice or other chemical doses on the screen surface. Keep the screen far away from high-temperature objects or fire.
b. If the screen is dirty wash the screen gently with a broom or a cotton ball do not use organic solvents to clean the screen surface.
c.When pulling the screen down, must be slow and vertical. Do not pull it roughly, please stop pulling as soon as the black border is out or the screen is jammed or injured, then send the screen to the maintenance center.
d. After using, put the screen back into the housing in order to avoid being polluted, If not using it for a long time, please take the screen from the wall and pack it in a carton.

Technical data:

a.Matte White Screen
Gain: 1.1 Viewing Angle: 160″ High color rendering, high resolution.
b.Glass Beaded Screen
Gain: 2.5 Viewing Angle: 60″ High color rendering, high resolution.
c. High-quality synchronous or tubular motor is equipped in the left end of the screen housing.
d. Gain Measurement: refer to the fig below Standard: JB/T8389 issued by the Ministry of Machinery Industry

e.Viewing Angle Measurement: refer to the fig below
Standard: JB T8389 issued by the Ministry of Machinery Industry

Specifications:

• MTS-213/Atlastand: TRIPOD SCREEN, operating manually
• 2130*2130mm
• 1:1,diagonal:118 inch
• slow rising
• metal housing, white plastic material
• Net weight: 9.0kgs
• Dimensions:2291011cm(LWD)

Please note: All information is subject to change without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>