Srhythm R1 Robot Vacuum User Manual

Find the rhythm of your soul

Robot Vacuum R1
User Manual

Safety Instructions

To reduce the risk of injury or damage, read these safety instructions carefully and keep them near when setting up, using, and maintaining this device.

WARNING SYMBOLS USED
This is the safety alert symbol. This symbol alerts you to potential hazards that could result in property damage and/or serious bodily harm or death.

Warning:

1. This device can be used by people aged 8 years and above after reading the safety instructions. Persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge should not use this device.
2. Children and pets should be supervised to ensure they do not play with this device when it’ s working.
3. Don’ tinsert any parts of the body (e.g. fingers or feet) into the brushes or wheels of the device.
4. Don’ t put anything on the device.
5. Don’ tsit or lean on the device.
6. Don’ t use the device to sweep up burning objects.
7. Don’ t let the device suck up hard or sharp objects, e.g. broken glass, iron nails, etc.
8.  Don’ tuse the device in a humid, flammable, hazardous, or wet environment.
9. Don’ t spray or place near flammable objects (e.g. gasoline, diluent, etc.), surfactants (e.g. cleanser, bathroom items, etc.), or drinks. It may resultin a fire or product malfunction.
10. Don’ t put water or cleanser into the device. that may cause product malfunction.
11. Don’ t use the device outdoors or in a suspended environment without a guard railing to avoid falling. Please use a physical barrier to keep the device from falling off the balcony when working to ensure safety.
12. Don’ t expose the device’ s electronics, battery, or charging base to water to avoid electric shock. Don’ t use the device or the charging base with wet hands.
13. Don’ t assemble or disassemble yourself. Please let professional technology experts maintain the device.
14. Don’ t clean or maintain the device or charging base before unplugging it from an electrical outlet.
15. Please use the original adapter, battery, charging device, and other accessories. Don’ t use other power cords.
16. This device includes a battery. Please don’ t submerge the product in water, burn it, or expose it to excessive temperatures. Exposure to fire or temperatures above 130°C may cause an explosion. Please stop using the product if the battery is defective. Please put the battery in a sealed bag and deal with it according to the local environmental rules as the battery needs to be recycled separately.
17. Please clean the device with a cloth dampened with water only.
18. Please note that the device will move by itself when it’ s working. Walk carefully to avoid to treading on it.
19. Please protect the power cable to avoid pulling, twisting, clamping by the door, or other damages. Don’ t use the device if it has been damaged.
20. Please unplug the device if the charging base hasn’ t been used for an extended time period.
21. Please empty the dust bin regularly and keep clean. Don’ t use the device when the dust bin is full.
22.  Don’ t let the charging base touch the metal parts.
23.  Please keep the cleaning tool out of reach of children.
24. The device is designed in such a way that it will not scratch the floor. It is still recommend to test a small area before cleaning the entire house.
25. Please purchase and use only original Srhythm accessories for the device.
26.  This device contains a battery that is only replaceable by a skilled technician.
27. The external flexible cable or cord of the power supply unit cannot be replaced. if the cord is damaged, the power supply unit must be discarded.
28. Do not handle the plug or the appliance with wet hands.
29. Do not use a battery pack or appliance that has been damaged or modified. Damaged or modified batteries may behave unpredictably resulting in fire, explosion, or the risk of injury.
30. Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care.
31.  Follow all charging instructions. Do not charge the battery pack or appliance outside the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase fire risk.

Tips:
Before use, please check the following items:

1. Please remove fragile or unnecessary items before cleaning the room. (e.g. loose paper, blinds, or curtain pull cords). Remove expensive pottery or flammables from the floor.

2. Please don’ t use the device in a room with sleeping children to prevent injuries.

3. Please check the battery to ensure it s fully charged and recharge it if it is low.

4. Please empty the dust collector if it is full.

5. Please close the door if you don’ t want the robot vacuum to enter the room. The robot vacuum may enter other rooms when operating.

6. It is recommended to set up a physical barrier in places where the device might fall. In most situations, the anti-drop sensor prevents the robot vacuum from falling. The effect of the sensor is reduced if it is dirty, the device is used on carpet, or a reflective or very dark floor.

7. Fold tasseled carpet edges underneath to prevent tangling Robot Vacuum.
   Avoid cleaning very dark-colored high-pile carpet or carpet thicker than 1.02 in/26 mm as they may cause Robot Vacuum to malfunction.

8. Keep the Robot Vacuum away from spaces lower than 2.87 in/73 mm to prevent sticking. If necessary, place a physical barrier to block off problem areas.

9. Keep the Robot Vacuum away from wet areas.

10. Robot vacuum may climb on top of objects less than 0.63 in/16 mm high and get stuck. Remove these objects from the room if possible.

11. Do not use the robot vacuum without a dust collector and/or filter in place.

12. We recommend using the robot vacuum on hard tile or wood floor.

13. Please remove the water tank, and only keep the dust collector for use on carpet (the carpet thickness should be less than 0.59 inches/15mm).

Place physical barriers in front of fireplaces and areas that may damage the Robot Vacuum if entered.
Notice
This symbol on the device or its packaging indicates:
Do not dispose of electrical appliances as unsorted municipal waste. use separate collection facilities. Contact your local authori- ty for information regarding available collection systems. If electri- cal appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food supply chain, damaging health and well- being. When replacing old appliances, the retailer is legally obliged to take back your old appliance for disposal free of charge.

What’s in the Box

At a Glance
A. Top&Side 

B. Bottom

C. Charging Base

Using Your Robot Vacuum

Preparation

1. Install the side brushes before use.
2. Turn on the main power switch on the bottom of the Robot Vacuum. (Don’t tear off the protective cover)

Remove the sticker next to the power switch and the foam blocks beside the bumper before use.

3. Place the Charging Base against a wall on a level surface.
   

4. Remove objects within 3 ft/1 m of the left and right sides and within 6 ft/2 m of the front of the Charging Base. If you cannot remove the objects, check whether the Robot Vacuum can return to the Charging Base normally.

5. Insert the round connector of the adapter into the power socket on the Charging Base and plug the other end into a wall outlet.
   *When the Charging Base is connected to AC power, the LED indicator turns BLUE.

« Install the Charging Base in a location that the Robot Vacuum can easily access. It is recommended to place the Charging Base against a wall, and on a hard-level surface rather than on rugs or carpets.
« Always keep the Charging Base plugged in, otherwise the Robot Vacuum will not automatically return to it.

6. For the mopping function, please install the mop on the back of the water tank and fill the tank with water. (Press the gray square button at the bottom of the water tank before installing).
   

Use R1 with the Srhythm App
Before you start, make sure that:
Your smartphone or tablet is connected to a 2.4GHz Wi-FiThe Robot Vacuum is attached to the Charging Base to ensure it has enough power during setup.
Download the app via App Store, Google Play, Srhythm official website or scanning the QRcode.
http://a.smart321.com/srhythmsmart
a.Switch on the Robot Vacuum, and the smartphone’ s “Bluetooth” and “Location”
Step 1: Press the ON/OFF button in the back of the Robot Vacuum, make sure it is powered on, and the  will have blue light on.
Step 2: Press the for 7 seconds till the Wi-Fi indicator beside it blinks.
Step 3: Turn on “Bluetooth” and “Location” on smartphone.
b. Follow the instructions in the app to complete the Wi-Fi connection
Step 1-2: Register.
Step 3: Log in to your account.
Step 4: Tap “Add device”.
Step 5: Search device, tap “Add” or add manually.
Step 6: Choose Wi-Fi, enter password, and tap” Next”.
Step 7: Robot Vacuum’ s information being loaded
Step 8: Select a cleaning mode or schedule cleaning via the app.

Charge Your Robot Vacuum

• Robot Vacuum has a pre-installed rechargeable battery that must be fully charged before use.
• Robot Vacuum returns to the Charging Base at the end of a cleaning cycle or when its battery is running low.
  Method 1: Attach the Robot Vacuum to the Charging Base by aligning its charging pins with the charging pins on the base.

Method 2: Press on the remote control to return the Robot Vacuum to the Charging Base.

Method 3: Press and hold the Start button on the machine for 3 seconds to return to the Charging Base.

Turn off the main power switch if the Robot Vacuum will not be used for a long time. To preserve battery life, recharge at least every 6 months.

Start /StOP Cleani ng

1.  Turn on the main power button on the bottom of the Robot Vacuum. (“ON”)
2.  Press on the Robot Vacuum to activate the automatic cleaning mode.
3.  Press on the Robot Vacuum to stop cleaning.

Make sure the main power switch on the bottom of the Robot Vacuum is turned on before use.

Turn Off your Robot Vacuum

Turn off the main power button on the bottom of the Robot Vacuum. (“OFF”)
Button indicator light

| Blue light| Normal power
---|---|---
Red light| Error warning
Red light flashes| Error warning
Orange light| Low battery/Back to Charging Base
Orange light flashes| Charging

Voice Alert
When R1 encounters a problem, the red/orange indicator on it will flash and you will hear the relevant voice prompts.
The voice prompts below are only for reference and may be changed slightly after voice pack updates. Please follow the voice prompts you have heard to find the cause and solution below.

Vacuum and remove any hair or debris from the rolling brush
• ground detection error| Drop Sensor suspended in air| Clean the Drop Sensor
• Side brush abnormal| Side brush stuck| Turn off the Robot Vacuum and remove any hair or debris from the side brush
• Left wheel abnormal Right wheel abnormal| Side wheel stuck or trapped| Vacuum Turn off the Robot  and remove any hair or debris from the side wheel
Voice Prompt| Cause| Solution
---|---|---
• Collision abnormal| Front collision bumper stuck| Repair the stuck front crash bumper, then press the start button to restart the Robot Vacuum
• Fan tan led     lease, p check it| Suction failure| Turn off the Robot Vacuum, clean out the dust bin. Make sure the suction port is not blocked by hair or debris.
• Low battery, please charge| Low Battery; system will shut down| Place the Robot Vacuum manually back into the charging cradle for charging

How to use Remote Control

Note: Install 2 AAA batteries before using the remote control for the first time.
Make sure the positive and negative ends are facing the correct polarity direction as marked in the battery compartment.

Remote Control Instructions

pause of the machine
Suction Adjustment| | Suction Setting| Set the suction force (Standard/Medium/Max)
Auto Cleaning|

A

| Cleaning in Auto Mode| In this mode, the RI performs scheduled cleaning (cleaning according to the mapped path)
Spot Cleaning| | Cleaning in Spot Mode| RI intensively cleans a specific area in a spiral pattern
Edge Cleaning| | Cleaning in Edge Mode| RI reduces its speed when it detects a wall and then follows the wall to ensure the edge is cleaned thoroughly
Up| | Control the operation of the Robot Vacuum| In working mode: Press and release to move forward about 10CM, press and hold to move forward continuously
Down| | Control the operation of the Robot Vacuum| In working mode: Press and release to rotate about 20° to the left, press and hold for 180° left and then forward
---|---|---|---
Left| | Control the operation of the Robot Vacuum| In working mode: Press and release to rotate about 20° to the left, press and hold to continuously rotate to the left
Right| | Control the operation of the Robot Vacuum| In working mode: Press and release to rotate about 20° to the right, press and hold to continuously rotate to the right
Return to Charge| | Control the Robot Vacuum back to the Charging Base for charging| The Robot Vacuum returns to the Charging Base for charging

Cleaning Mode

1. Auto Cleaning
   Press on the Robot Vacuum or (8 on the remote control to start cleaning in Auto Mode.
   Robot Vacuum will leave the Charging Base and start sweeping automatically back  and forth in a square fashion until cleaning is complete. Robot Vacuum will returnto the Charging Base automatically when it finishes cleaning. Robot Vacuum will return to the Charging Base automatically when the battery level becomes low or when Robot Vacuum finishes cleaning. By default, Robot Vacuum starts in Auto cleaning mode when turned on.

2.  Spot Cleaning
   Press on the remote control to start cleaning in Spot Mode.
   In Spot Mode, the Robot Vacuum intensively cleans a specific area in a spiral pattern. This is useful if there is a concentrated area of dust or debris.

3. Edge Cleaning
   Press on the remote control to start cleaning in Edge Mode.
   In Edge Mode, the Robot Vacuum cleans along the room edges. It will reduce its speed when it detects a wall and then follows the wall to ensure the edge is cleaned thoroughly.

4. Manual cleaning
   You can direct the Robot Vacuum to clean a particular area by using the directional buttons on the remote control.

5. Set a Scheduled Cleaning****

Step 1: Open the APP and click on the name of your Robot Vacuum.
Step 2: Tap “Schedule”.
Step 3: Set the automatic cleaning time, turn on the cleaning switch and save.

• This function is available in the app only.

Cleaning and maintenance

For optimal performance, follow the instructions below to clean and maintain the Robot Vacuum R1 regularly. The frequency of cleaning/replacement will depend on your usage habits.
Recommended cleaning/replacement frequency

Keep the robot vacuum dry,don’t put the water into the machine.

Clean the dust collector and filter
(The filter can be replaced)
The dust collector must be cleaned before and after each use. the machine will lose suction power when the dust collector is full.

a. Hold down the dust collector buckle and pull the dust collector out.

b. (Do not turn upside down when removing the dust collector). Hold it right side up and open the dust collector.

c. Hold the dust collector at an appropriate angle and use the cleaning tool to clean and empty the dust collector.

d. Take out the filter.

e. Rinse the dust collector and filter (it is recommended to clean them once amonth). Please wait until the dust collector and filter are completely dry before using them to ensure their longevity.

Clean the Mop
Itis recommended that the mop and water tank are cleaned after each use.

Clean the Rolling Brush
Foreign substances, such as hair, can easily get tangled in the rolling brush, and dirt may adhere to it. Be sure to clean the brushes once a week.
a. Press and hold the brush frame release tabs, open up and remove the roller brush frame.
b. Lift the rolling brush to remove.
c. Clean the rolling brush with the provided cleaning tool.
d. Insert one end of the square bearing seat of the roller brush into the corresponding square card slot (not reversible).
e. Press down to snap the brush frame into place.

Clean the Side Brushes
Foreign substances, such as hair, can easily get tangled in the side brushes, and dirt may adhere to them. Be sure to clean them once a week.
a. Remove the side brushes.

b. Carefully unwind and pull off any hair or string wrapped between the main unit and the side brushes.

c. Use a cloth dampened with warm water to remove dust from brushes or gently reshape them.

– Only use the side brushes when they are completely dry.
– To protect your wood or carpeted floor, our side brushes are made of soft materials. They may become curled after being used for awhile, but it will not affect their cleaning capability.

Replace the Side Brushes
The side brushes may become bent or damaged after being prolonged use.
Follow the instructions below to replace them.

• Pull off the old side brushes and snap the replacement brushes into place.

Clean the Sensors

Clean the Charging Pins
To maintain peak performance, clean the charging pins once a week.

• Dust off the charging contact pins using a cloth or a cleaning brush. (Make sure the power is off before cleaning)

Clean the Swivel Wheel
Hair or dust particles can easily get entangled in the swivel wheel. Be sure to clean the swivel wheel once a week.
a. Pull out the swivel wheel.
b. Clean any hair or debris wrapped around the wheel or entangled inside the wheel cavity.
c. To reinstall the wheel, push in until it clicks into place. Check to make sure the wheel ticks.

Troubleshooting

the rolling brush.
·    Check if the rolling brush and brush guard are installed properly.
The side brushes do not rotate| ·    Clean the hair and other debris off the rolling brush.
·    Check if the rolling brush and brush guard are installed properly.
Robot Vacuum R1 cannot be activated| ·    Make sure the main power switch is in the ON position.
·    Make sure the battery is fully charged.
·    Replace the remote control batteries (2 AAA) install them correctly.
·    Make sure the remote control is within range (16 ft/5 m) of Rl.
·    If you still have trouble, turn off the main power switch and turn it back on.
Suction power is weak| ·      Check for any obstructions blocking the suction inlet.
·      Empty the dust collector.
·      Check if the filter is wet due to water or other liquid on the floor. Air-dry the filter completely before use.
The remote control does not work| ·    Replace the batteries (2 AAA) in the remote control and install them correctly.
·    Make sure the Robot Vacuum is turned on and fully charged.
Problems| Solutions
---|---
RI cannot be charged| ·   Remove items around the Charging Base
·    Dust off the charging contact pins with a dry cloth.
·    Check if the orange indicator light on the Charging Base lights up. If not, contact the Srhythm customer service team.
RI stops working suddenly| ·    Check if the Robot Vacuum is trapped or stuck on an obstacle.
·    Check if the roller brush is stuck.
·    Check if the side brushes are stuck.
·    Check if the side wheels are stuck.
·    Check if the battery level is too low.
Louder noise| ·    Check if the dust collector is installed correctly.
·    Check if the filter is installed correctly.
·    Check for foreign objects stuck on the roller brush or the side brushes.

Technical Specification

| Model| Srhythm R1
---|---|---
Size| 32.2cm32.3cm6.9cm
Battery| Li-ion2900mAh
Weight| 2.43kg/5.351b
Battery Voltage| 14.4V
Power Consumption| 30W
Input| 19V=0.6A
| Input| 100-240V-0.5AMax, 50/60Hz
---|---|---
Output| 19V=0.6A

Customer Service
If any part of your product is damaged, discontinue use. Contact your authorized Srhythm dealer or Srhythm customer service. For FAQs and more information, visit www.srhythm.com.
We are here to serve you.
Email: service@srhythm.com

FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and radiates radio frequency energy. If not installed and used according to instructions, it may interference with radio communications. However, there is no guarantee interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.
•  Changes or modifications not expressly approved by the compliance party could void the user’ s authority to operate the equipment.

RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance 20 cm between the radiator & body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>