PHILOSIN AN1330 13.3 Inch Android Car Multimedia Player User Manual
- June 13, 2024
- PHILOSIN
Table of Contents
PHILOSIN AN1330 13.3 Inch Android Car Multimedia Player User Manual
Principle description :
This product, An1330, is a 13.3-inch Android system. The power is turned on by connecting the AN1330 to a 12V adapter, and the system starts to operate. When the screen displays the Android interface, you can begin installing the apps you need. This product supports two USB 3.0 ports, two USB 2.0 ports, one Ethernet 1000MHZ port, one RS232 port, one OTG port, and one Cash Drawer.
Product Features
- CPURK3568 highest frequency up to 2.0GHZ
- Memory2G/4G/8G DDR4 optional
- EMMC16G to 64G optional standard 16G)
- Network Ethernet support 10MHZ / 100MHZ / 1000MHZ LAN WiFi support 2.4G 802.11b/g/n
- Bluetooth :BT4.2
- Operation system: ANDROID11
- Touch panel10 point multi-touch capacitive touch screen
- 13.3 inch 1920×1080 Full HD resolution , Wide view angle TFT panel
- USB interfaceUSB3.0/USB HOST/OTG
- Adaptive temperature: 0 ~ 45
I/O Port :
Top Indicator Bar :
Top Tool Bar ( To quickly setup system) :
Bottom Tool Bar :
Setup ( Detail system setup and information )
Pre-install Application :
Outline Dimension :
Specification :
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. NOTE: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. To
maintain compliance with FCC’s RF Exposure guidelines, This equipment should
be installed and operated with minimum distance between 20cm the radiator your
body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>