Soundcraft 32R16R Mini Stagebox 32 Installation Guide

Soundcraft 32R16R Mini Stagebox 32

Product Information

• Product Name:
• Soundcraft Mini Stagebox 32
• Manufacturer:
• HARMAN International Industries Ltd.
• Model:
• Mini Stagebox 32
• Description:
• The Soundcraft Mini Stagebox 32 is a compact stagebox designed for audio applications. It is compatible with Vi2-Vi6 range consoles, Si or Vi1 consoles, and can be connected to two consoles simultaneously.

Product Usage Instructions

Important Safety Warnings

To ensure your safety and avoid invalidation of the warranty, please read and follow these important safety warnings:

• Read the manual carefully before using the unit for the first time.
• Do not make any modifications or changes to the device without explicit approval from Harman.
• Operation of an unauthorized device is prohibited and may be in violation of regulations.
• If experiencing interference, try the following:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a different circuit from the receiver.
  • Consult the dealer or an experienced radio/TV technician for help.
• Contact Harman International Industries Ltd. for further details.

Features

The Soundcraft Mini Stagebox 32 offers the following features:

• Compact design
• Front and rear panel connectors
• MADI link card support

Connecting the Mini Stagebox

Follow the instructions below to connect the Mini Stagebox:

Connecting to Vi2-Vi6 Range Consoles

To connect the Mini Stagebox to Vi2-Vi6 range consoles, follow these steps:

1. Refer to the manual of the console for specific connection instructions.
2. Connect the Mini Stagebox to the console using compatible cables.

Connecting to Si or Vi1 Consoles

To connect the Mini Stagebox to Si or Vi1 consoles, follow these steps:

1. Refer to the manual of the console for specific connection instructions.
2. Connect the Mini Stagebox to the console using compatible cables.

Connecting to Two Consoles

To connect the Mini Stagebox to two consoles simultaneously, follow these steps:

1. Refer to the manuals of both consoles for specific connection instructions.
2. Connect the Mini Stagebox to both consoles using compatible cables.

Specifications

The specifications of the Soundcraft Mini Stagebox 32 are as follows:

• Model: Mini Stagebox 32
• Manufacturer: HARMAN International Industries Ltd.
• Compatibility: Vi2-Vi6 Range Consoles, Si or Vi1 Consoles

Warranty

The Soundcraft Mini Stagebox 32 comes with a warranty. For more information about the warranty, please refer to the documentation provided with the product.

IMPORTANT
Please read this manual carefully before using your unit for the first time.

This equipment complies with the EMC directive 2004/108/EC and LVD 2006/95/EC

• This product is approved to safety standards
• IEC 60065:2005 +A1:2005
• EN60065:2006 +A1:2006 + A1:2008
• UL60065 7th Edition
• CAN/CSA-E60065-03 +A1:2006
• And EMC standards
• EN55103-1: 2009 (E2)
• EN55103-2: 2009 (E2)

Warning: Any modification or changes made to this device, unless explicitly approved by Harman, will invalidate the authorisation of this device. Operation of an unauthorised device is prohibited under  Section 302 of the Communications act of 1934, as amended, and Subpart 1 of Part 2 of Chapter 47 of the Code of Federal Regulations.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

For further details contact

• Harman International Industries Ltd, Cranborne House, Cranborne Road, Potters Bar, Hertfordshire EN6 3JN, UK
• Telephone +44(0) 1707 665000
• Fax +44 (0)1707 660742
• email: [email protected].

Harman International Industries Ltd. 2014 All rights reserved. Parts of the design of this product may be protected by worldwide patents. Part No. 5028913

Soundcraft is a trading division of Harman International Industries Ltd. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Soundcraft shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Soundcraft. Harman International Industries Limited  Cranborne House, Cranborne Road, POTTERS BAR, Hertfordshire, EN6 3JN, UK

• Tel: +44 (0)1707 665000
• Fax: +44 (0)1707 660742
• http://www.soundcraft.com.

INTRODUCTION

SAFETY NOTICES
FOR YOUR OWN SAFETY AND TO AVOID INVALIDATION OF THE WARRANTY PLEASE READ THIS SECTION CAREFULLY.
SAFETY SYMBOL GUIDE

SAFETY NOTICES
FOR YOUR OWN SAFETY AND TO AVOID INVALIDATION OF THE WARRANTY PLEASE READ THIS SECTION CAREFULLY. SAFETY SYMBOL GUIDE

WARNINGS
The lightning flash with arrowhead symbol, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTIONS
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

NOTES
Contain important information and useful tips on the operation

HEADPHONES SAFETY WARNING

• Contain important information and useful tips on headphone outputs and monitoring levels.of your equipment.
• ESD WARNING
  The crossed-out hand symbol is intended to alert the user to devices sensitive to electrostatic discharge. Please refer to the instructions on page 6.

IMPORTANT SAFETY WARNINGS

THIS APPARATUS MUST BE EARTHED. Under no circumstances should the safety earth be disconnected from the mains lead. The mains supply disconnect device is the mains plug. It must remain accessible so as to be readily operable when the apparatus is in use.  If any part of the mains cord set is damaged, the complete cord set should be replaced. The following information is for reference only. The wires in the mains lead are coloured in accordance with the following code:

• Earth (Ground): Green and Yellow (US – Green/Yellow)
• Neutral: Blue (US – White)
• Live (Hot): Brown (US – Black)

the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol .

The wire which is coloured Blue must be connected to the terminal in the plug
which is marked with the letter N.
The wire which is coloured Brown must be connected to the terminal in the plug
which is marked with the letter L.
Ensure that these colour codes are followed carefully in the event of the plug being changed.

This unit is capable of operating over a range of mains voltages as marked on the rear panel.

The internal power supply unit contains no user serviceable parts. Refer all servicing to a qualified service engineer, through the appropriate Soundcraft dealer.

ELECTROSTATIC DISCHARGE (ESDELECTROSTATIC DISCHARGE (ESD)

Many semiconductor components are sensitive to electrostatic discharge (ESD). The lifespan of assemblies containing such components can be drastically reduced by improper handling during maintenance and repair. Please observe the following rules when handling ESD sensitive components:

ESD sensitive components should only be stored and transported in the packing material specifically provided for this purpose.

• When performing a repair by replacing complete assemblies, the removed assembly must be sent back to the supplier in the same packing material in which the replacement assembly was shipped. If this should not be the case, any claim for a possible refund will be null and void.
• Unpacked ESD sensitive components should only be handled in ESD protected areas (EPA, e.g. area for field service, repair or service bench) and only be touched by persons wearing a wristlet connected to the ground potential of the repair or service bench by a series resistor. The equipment to be repaired or serviced as well as all tools and electrically semi-conducting work, storage, and floor mats should also be connected to this ground potential.
• The terminals of ESD sensitive components must not come in uncontrolledcontact with electrostatically chargeable or metallic surfaces (voltage puncture, discharge shock hazard). • To prevent the components from undefined transient stress and possible damage due to inadmissible voltages or compensation currents, electrical connections should only be established or separated when the equipment is switched off and after any capacitor charges have decayed.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water. Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of a polarised or grounding type plug. A polarised plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

NOTE: It is recommended that all maintenance and service on the product should be carried out by Soundcraft or its authorised agents. Soundcraft cannot accept any liability whatsoever for any loss or damage caused by service, maintenance or repair by unauthorised personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not expose the apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus. No naked flame sources, such as lighted candles, should be placed on the apparatus. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths, curtains etc.

WORKING SAFELY WITH SOUND

• Although your new unit will not make any noise until you feed it signals, it has the capability to produce sounds which when monitored through a PA system or headphones can damage hearing over time.
• The table below is taken from the Occupational Safety & Health Administration directive on occupational noise exposure (1926.52):

PERMISSIBLE NOISE EXPOSURE

• Conforming to this directive will minimise the risk of hearing damage caused by long listening periods. A simple rule to follow is — the longer you listen, the lower the average volume should be.
• Please take care when working with your audio. If you are manipulating controls which you don’t understand (which we all do when we are learning), make sure your monitors are turned down. Remember that your ears are the most important tool of your trade, look after them, and they will look after you.
• Most importantly — don’t be afraid to experiment to find out how each parameter affects the sound — this will extend your creativity and help you to get the best results. Recommended headphone impedance is 50-600 ohms.

FEATURES

The Mini Stagebox 32 is ideal for for expanding the I/O capabilities of any of the Vi or Si range of consoles regardless of whether that I/O is needed locally or hundreds of metres away on the stage. The Soundcraft Mini Stagebox 32 requires only 3U of rack space and, in this tiny footprint, provides 32 recallable mic/line inputs, 8 balanced line outputs and 4 pairs of AES outputs, all lifted directly from the Vi1 and larger Compact Stagebox. The Mini Stagebox 32 is connected to the host console using Cat-5, similar to how the larger 64 mic/line Vi6 Stagebox is hooked up, and shares the same redundant MADI cable capability when connected directly to a single console. The efficient design negates the need for a fan so making the MINI Stagebox ideal for applications where silence is a must!

Expansion Slots
On the rear of the Mini Stagebox 32 are two blank panels reserved for future expansion.

MINI STAGEBOX 32 FRONT PANEL

1. MIC/LINE IN 1-16 – CARD A
2. MIC LINE IN 17-32 – CARD C
3. LINE OUT 1-8 – CARD I
4. AES OUT 1-8
5. MADI CARD
6. POWER INDICATOR

MINI STAGEBOX 32 REAR PANEL MINI STAGEBOX 32 REAR PANEL

AC INLET AND POWER SWITCH

MOUNTING MINI STAGEBOX 32

When installed in a 19″ rack mount ensure all four mounting holes are used. If mounted with other equipment that may get hot (~power requirement of ‘other’ equipment >100W) it is recommended to leave a 1U gap between the equipment. In all scenarios, the air vents must not be obstructed and the Mini  Stagebox 32 must not be mounted in a fully sealed enclosure.

MADI LINK CARD
This card provides the audio and control connections to the console through a Cat-5 MADI link. The corresponding MADI card in the console transmits the clock for the Mini Stagebox 32 down the MADI stream. The second (AUX) connector on the card can be used to provide a redundant connection to the console, or to connect to a second console. The MAIN/AUX switch on the MADI HD card changes the mode of the mic preamp control and redundancy setting. When the “MAIN” switch is set to ON and the “AUX” switch is set to OFF, the console connected to the MAIN port will have the mic preamp control. When the “AUX” switch is set to ON and the “MAIN” switch is set to “OFF”, the console connected to the AUX port will have the mic preamp  control. If both switches are set to OFF, the MADI HD card will operate in REDUNDANT mode.
The MADI HD card indicates its clock status with the ‘LOCK’ LED on the card. It is possible to connect two different consoles to the MAIN and AUX ports, and provide a split of the mic inputs to the two consoles. However, be aware of which console has control of the preamp gains and is able to send signals to the Mini Stagebox (MSB) 32 outputs. The main console is determined by the Main/Aux/Redundant switch on the new variant of MADI HD cards and is determined by the first active console to be connected to the MSB, or the first console to be switched on for older variants of the MADI HD card. For the older variant MADI HD cards, this means that the gain control and output routing can switch from one console to the other, depending on power-up order or connection sequence.

CONNECTING IT UP
MINI Stagebox Connecting to Vi2-Vi6 Range Consoles
Note: Connections from the local rack to the Mini Stagebox 32 may vary depending on actual flightcase and breakout panel options.

MINI STAGEBOX 32 CONNECTING TO Si OR Vi1 CONSOLES

• Connections from the console to the MINI Stagebox may vary depending on actual flightcase and breakout panel options.
• For Si1, 2 and 3 consoles, including their ‘PLUS’ variants, read the Si Option Slot and Option Card User Guide if using more than 1 option card in the console.

MINI STAGEBOX CONNECTING TO TWO CONSOLES

MINI STAGEBOX TYPICAL SPECIFICATIONS

Frequency Response
Mic / Line Input to any Output: +0/-1dB, 20Hz – 20kHz

T.H.D.
Mic Sensitivity -30dBu: < 0.01% @ 1kHz

• Noise
  Residual noise: -85dBu
  Mic Input E.I.N. (maximum gain): -125dBu (150Ω source)
  Mix noise, masters at unity: < -86dBu
  1 input to mix at unity gain: -84dBu
  CMRR mic @1KHz (max gain): -86dBu

• Input Gain
  Mic Gain: -5dB – 58dB integrated pad design 1dB steps

• Max. input level: +24dBu
  Max. output level: +22dBu
  Sample rate: 48kHz
  Convertor resolution: 24 bit

• Latency: 1.5ms

• Internal clock accuracy: +/- 25ppm

• Mains power consumption: 33W

• Mains voltage operating range: 90 — 264 VAC, 47 — 63Hz

• Operating temperature range: -10oC — +50oC

• Relative humidity: 0 — 90%

• Storage temperature range: -10oC — +50oC

WARRANTY

Soundcraft is a trading division of Harman International Industries Ltd. End User means the person who first puts the equipment into regular operation. Dealer means the person other than Soundcraft (if any) from whom the End User purchased the Equipment, provided such a person is authorised for this purpose by Soundcraft or its accredited Distributor. Equipment means the equipment supplied with this manual.

Any Equipment or component returned will be at the risk of the End User whilst in transit (both to and from the Dealer or Soundcraft) and postage must be prepaid.

This warranty shall only be valid if:

• a) the Equipment has been properly installed in accordance with instructions contained in Soundcraft’s manual; and
• b) the End User has notified Soundcraft or the Dealer within 14 days of the defect appearing; and
• c) no persons other than authorised representatives of Soundcraft or the Dealer have effected any replacement of parts, maintenance adjustments or repairs to the Equipment; and
• d) the End User has used the Equipment only for such purposes as Soundcraft recommends, with only such operating supplies as meet Soundcraft’s specifications and otherwise in all respects in accordance with Soundcraft’s recommendations.

Defects arising as a result of the following are not covered by this Warranty: faulty or negligent handling, chemical or electro-chemical or electrical influences, accidental damage, Acts of God, neglect, deficiency in electrical power, air-conditioning or humidity control.

The benefit of this Warranty may not be assigned by the End User.

End Users who are consumers should note their rights under this Warranty are in addition to and do not affect any other rights to which they may be entitled against the seller of the Equipment.

PRODUCTS UNDER WARRANTY
UK customers should contact their local dealer. Customers outside the UK are requested to contact their territorial distributor who is able to offer support in the local time zone and language. Please see the distributor listings on our website (www.soundcraft.com) to locate your local distributor.

OUT-OF-WARRANTY PRODUCTS
For out-of-warranty consoles purchased in the United Kingdom, please contact the Customer Services Department (e-mail: [email protected]) at the factory in Potters Bar, Hertfordshire: Telephone +44 (0)1707 665000. For all other out-of-warranty consoles, please contact the appropriate territorial distributor. When mailing or faxing please remember to give as much information as possible. This should include your name, address and a daytime telephone number. Should you experience any difficulty please contact Customer Services Department (e-mail: [email protected]).

• Soundcraft Mini Stagebox 32 User/Installation Guide 0514
• Soundcraft
• Harman International Industries Ltd
• Cranborne House
• Cranborne Road
• Potters Bar
• Herts. EN6 3JN
• United Kingdom
• +44 (0)1707 665000
• www.soundcraft.com.

References

• Soundcraft - Professional Audio Mixers | English (US)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>