LA CROSSE TECHNOLOGY WS-9160UV3 Wireless Thermometer User Guide

Wireless Thermometer SET UP GUIDE
MODEL: WS-9160Uv3

Power Up

1. Insert 2-AA batteries into your Temperature Sensor.
2. Insert 2-AA batteries into your Station.
3. Once readings from you sensor appears on your station, you can mount it outside. See page 7 for more details.

Watch our sensor mounting videos: bit.ly/th_sensor_mounting Custom Calendar Display

• Press and release the DATE button to change the display of the Calendar, or have it not show.
• Thermometer will stay on selection.

Settings Menu

1. Hold the SET button until the display changes, to enter the Settings Menu.
2. Press and release the +/- buttons to adjust values. Hold to adjust quickly.
3. Press and release the SET button to confirm values and move to the next setting or exit.

Settings Menu Order:

• Hello
• Language (English, Español, Français, Deutsch)
• 12/24 Hour Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date, Date/Month
• Fahrenheit/Celsius
• Thank You

Language: The language selected in this menu will control other menu items as well as your full weekday readout.
Weekday: The Weekday will set automatically when your Year, Month and Date are set.

Temperature/Humidity Readings

1. INDOOR TEMPERATURE
   Current Indoor
   Temperature.

2. INDOOR HUMIDITY
   Current Indoor Humidity.
   Press the HUMIDITY button to view.

3. LOW BATTERY ICON
   Low Battery in Station

4. OUTDOOR TEMPERATURE
   Current Outdoor
   Temperature.

5. LOW BATTERY ICON
   Low Battery in Sensor

6. RECEPTION ICON
   Indicates if the station is receiving data from the sensor.

7. AUTO-SCROLL ICON
   Readings will automatically scroll through each channel when multiple sensors are connected..

8. CHANNEL INDICATOR
   Indicates readings from sensor on channel 1, 2, or 3 if multiple sensors are connected to the station.

Temperature Records (MIN/MAX)

Viewing Records
Press and release the MIN/MAX button to toggle MIN/MAX readings with time/date stamp. Time and date of the record will show.
Viewing Order:

• Indoor Minimum Temperature Record
• Indoor Maximum Temperature Record
• Outdoor Minimum Temperature Record Channel 1
• Outdoor Maximum Temperature Record Channel 1

Note: If additional Temperature sensors are added, additional presses of the MIN/MAX button will show those records as well.
Indoor MIN Temp. Indoor MAX Temp. Outdoor MIN Temp. Outdoor MAX Temp. Reset Temperature Records

1. Press and release the MIN/MAX button to view the individual temperature values you’d like to reset.
2. Hold the MINUS (-) button until dashes appear.
3. The reading will then reset to the current value.

Sensor Mounting

For Accurate Temperature Measurements

• Insert a mounting screw through the hole at the top to securely mount the sensor. It can also hang from the back using a nail.
• Mount the sensor vertically in a protected well-shaded area. Keeping it out of direct weather elements such as sunlight, rain, snow, etc. will help avoid inaccurate readings.
• For additional protection against weather elements, a Sensor Weather Shield: bit.ly/weather-shield can be purchased separately.
• The maximum wireless transmission range to the station is up to 330ft (100m) in open air. This does not include walls, floors, or other large obstructions.
• For online video instructions, visit: bit.ly/th_sensor_mounting

Search for Sensors
If you are seeing “NO” or dashes for any sensor readings, please try the following steps:

1. Hold the SENSOR button to search for all sensors.
   The Reception Indicator will begin to animate.

2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next to the display and remove power from the sensor and station.

3. Press any button on the station 20 times and leave the parts sit for a few moments with the power off.

4. Install a new set of alkaline batteries into the sensor, then power up your station again.

5. If your sensor data is still not appearing after these steps, please contact our support staff. For additional help visit: bit.ly/basic_restart

Factoxry Restart

If your station is acting strangly, hold the DATE and RAIN buttons together to factory restart your station.
Sensor Weather Shield (not included)

• The Sensor Weather Shield is designed to protect your outdoor sensor from rain and snow.
• This shield will offer limited protection from the sun’s heat.
• Optional purchase at: bit.ly/925-1418

Optional Add-on Sensors

This station can read an add-on Rain Sensor, which will read in the Time Area. It can also read up to two additional Temperature/Humidity Sensors , which will show as Channel 2 or 3 in the Outdoor Temperature Area.
Add Sensors

1. Install batteries into your add-on Rain or Temperature/Humidity sensor(s).
   Note: For Temp/Humidity sensors, be sure to select channel (2 or 3) before you insert batteries.

2. Hold the SENSOR button until the Reception Indicator starts to animate. This will start a search for your sensors.

3. Your sensor(s) should connect within the next few minutes.

View Add-on Sensors:

• Press the RAIN button to view Rain readings and history.
• Press the SENSOR button to toggle through readings from sensors 1, 2 or 3.

Note: When multiple sensors are connected the you can view individual sensors or auto-scroll through all three channels. The auto-scroll indicator will lose one segment every 1 second, for 5 seconds, then switch to the next channel.
Purchase Extra Sensors
Visit: bit.ly/ws-9160uv3_parts to find and purchase compatible add-on sensors.

https://bit.ly/ws-9160uv3_parts

Stay in Touch!
Ask questions, watch setup videos, and provide feedback on our social media outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram.

Before you continue to YouTubetwitter.com/LaxTechnologyLa Crosse Technology (facebook.com)La Crosse Technology (@lacrossetechnology) • Instagram photos and videos

Specifications

Weather Station (WS-9160Uv3)

• Temperature Range:
  32ºF to 122ºF (0ºC to 50ºC)

• Humidity Range:
  10% – 99% RH

• Power:
  2-AA, IEC, LR6 batteries (not included)

• Battery Life:
  Over 24 months TH Sensor (TX141-B (all versions)

• Temperature Range:
  -40°F to 140°F (-40°C to 60°C)

• Humidity Range:
  10% – 99% RH

• Transmission Range:
  Over 330 feet (100 meters) in open air RF 433MHz

• Update Interval:
  About every 51 seconds

• Power:
  2-AA, IEC, LR6 batteries (not included)

• Battery Life:
  Over 24 months

Care & Maintenance

When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.

• Do not mix Alkaline, Lithium, standard, or rechargeable battteries.
• Always purchase the correct size and grade of battery most suitable for the intended use.
• Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the environment, please check the internet or your local phone directory for local recycling centers and/or follow local government regulations.

CA WARNING:
This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.gov

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints.
The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment. Such changes or modifications could void the user authority to operate the equipment.
We’re Here to Help
If you require additional assistance, get in touch with our friendly customer support team based in La Crosse, WI.
Self Help: bit.ly/ws-9160uv3_support
Online: bit.ly/contact_techsupport
Phone: 1.608.782.1610
Our knowledgable customer support team is available:
Mon-Fri 8am-6pm CST

https://bit.ly/ws-9160uv3_support

Warranty & Patents
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty
Patents: www.lacrossetechnology.com/pages/patents

DOUBLE YOUR WARRANTY

Scan the QR Code or visit: bit.ly/ws-9160uv3_register to register your product and double the standard 1-year warranty for free by opting to recieve occasional product emails.

https://bit.ly/ws-9160uv3_register
Designed in La Crosse, Wisconsin
Made in China
Printed in China
DC 021723

References

• 925-1418 Sensor Weather Shield – La Crosse Technology
• x.com
• La Crosse Technology (@lacrossetechnology) • Instagram photos and videos
• YouTube
• YouTube
• 925-1418 Sensor Weather Shield – La Crosse Technology
• WS-9160UV3 Wireless Thermometer – La Crosse Technology La Crosse Technology
• WS-9160UV3 Wireless Thermometer – La Crosse Technology La Crosse Technology
• WS-9160UV3 Wireless Thermometer – La Crosse Technology La Crosse Technology
• Patents – La Crosse Technology
• Warranty – La Crosse Technology
• P65Warnings.ca.gov
• YouTube
• 925-1418 Sensor Weather Shield – La Crosse Technology
• WS-9160UV3 Wireless Thermometer – La Crosse Technology La Crosse Technology
• WS-9160UV3 Wireless Thermometer – La Crosse Technology La Crosse Technology
• WS-9160UV3 Wireless Thermometer – La Crosse Technology La Crosse Technology

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>