Labco Scientific 2mL Blue Pipette Pump User Manual
- June 13, 2024
- Labco Scientific
Table of Contents
Labco Scientific 2mL Blue Pipette Pump
Product Information
- Contact Information:
- Email: sales@labcoscientific.com.au
- Website: labcoscientific.com.au
- Phone: 1800 052 226
- Address: PO Box 5816, Brendale, QLD 4500
Product Using Instructions
- Insert the pipette into the chuck of the pump with a slight pressure.
- Extreme care should be taken when inserting disposable glass pipettes because of the possibility of the glass shattering.
- To loosen the pipette, just pull gently.
Lubricating Instructions
- To maintain good sealing and free action of the piston, it is recommended that the piston seal is to be lubricated from time to time.
- Pull out plastic pin and remove the wheel (1)
- Withdraw piston (2) and piston seal(3)
- Grease the piston seal (3)
- Reassemble in reverse order
INSTRUCTIONS FOR USE
- Insert the pipette into the chuck of the pump with a slight pressure.
- Extreme care should be taken when inserting disposable glass pipettes because of the possibility of the glass shattering.
- To loosen the pipette, just pull gently.
LUBRICATING INSTRUCTIONS
- To maintain good sealing and free action of the piston, it is recommended that the piston seal is to be lubricated from time to time.
- Pull out plastic pin and remove the wheel (1)
- Withdraw piston (2) and piston seal(3)
- Grease the piston seal (3)
- Reassemble in reverse order
Printed technical specifications are subject to change without notification
Labco® is a registered trademark.
See the full product range online.
CONTACT
- 1800 052 226
- sales@labcoscientific.com.au
- labcoscientific.com.au
- 1800 052 226
- PO Box 5816, Brendale, QLD 4500
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>