Pyle PDWM811RD UHF 2 Channel Wireless Handheld Microphone User Guide

June 13, 2024
Pyle

pyle-logo

Pyle PDWM811RD UHF 2 Channel Wireless Handheld Microphone

Pyle-PDWM811RD-UHF-2-Channel-Wireless-Handheld-Microphone-
product

WIRELESS HANDHELD MICROPHONE SYSTEM SPECIFICATION

Please read carefully before use and keep it for future reference.

TRANSMITTER

UHF 2 Channel Wireless Handheld Microphone Portable Digital Audio Sound Mixer Receiver Set with Bluetooth Receiver System, Addressable Frequency

  1. Power switch
  2. Display screen
  3. Frequency selective buttons
  4. Battery case

Questions? Comments?

We are here to help!

RECEIVER

Front Panel

  1. C/6.35 Audio line input port
  2. D/6.35 Audio line input port
  3. Volume adjustment for channel C
  4. Volume adjustment for channel D
  5. Volume adjustment for channel A
  6. Volume adjustment for channel B
  7. Echo adjustment
  8. Music Volume adjustment
  9. USB 2.1 input port
  10. MP3 module display
  11. Switch button (Bluetooth/MP3)
  12. Power switch
  13. Multifunction button (Pause/P lay/Next/Last)
  14. Recording Button

Back Panel

  1. Antenna for B channel
  2. DC12V Power supply
  3. 6.35 Mixed output port
  4. The right track 6.35 input port
  5. The left track 6.35 input port
  6. Stereo 3.5 output port
  7. 3.5 Audio input port
  8. Antenna for A channel

OPERATING THE TRANSMITTER

  1. Open the battery case according to the instructions and insert the battery noting the correct polarities (+ and –) indicated in the battery
  2. Set the handheld switch to the “ ON ” position, or press the the switch. The microphone will display the frequency which means the microphone is turned ON. Turn the switch to “ OFF ” to turn on the power or press the switch again. If there’s no frequency display that means the microphone is turned OFF.

DISPLAY FUNCTION

NOTE: The receiver and transmitter system should be with the same channel (frequency) one by one, otherwise it will not work.

OPERATING THE RECEIVER

  1. Rotate the antennas A and B to separate them by 90 degrees.
  2. Connect the power base DC/AC
  3. Audio output connection: For mixed non-equilibrium output, insert the end of the audio cable to UN BALAF OUT: 1:2 socket and insert to the other end of the MIC IN or AUX IN socket from the mixer or amplifier
  4. Turn ON the power switch, and the power indicator lights up.
  5. When the handheld microphone is turned on, the “RF” indicator of the receiver lights up. The receiver output volume can be controlled by the volume control knob.

Insert the voice line into UN BAL AF OUT: socket 1, connect the other end into the socket of MIC IN or AUX IN of mixer or amplifier, same operation type with another channel.

Independent balanced output BALAF OUT: 1 and 2 provide audio transmission three-pin card interface for professional mixer amplifiers.

RECEIVER INSTALLATION THE METHOD

  • One meter above the ground.
  • Pull out all the antennas, otherwise, it will affect the reception effect.
  • Be more than one meter away from the wall.

NOTICE

  1. Frequency Conversion: If you want to change the frequency during use, prepress the frequency conversion key once The handheld microphone displays flashes once, indicating that the frequency has been changed.
  2. Frequency Lock: In use, if you want the receiver to be able to use only one or specified Handheld microphone, please turn on the handheld microphone, and then do the following:
    • Press the power switch to the “ON” position, display 2 is lit, and the receiver works normally
    • Press power switch 4 once, screen 6 brightness, microphone works normally
    • Turn on the handheld microphone, press and hold the frequency selection button 3 , then press and hold power switch 4 (about 5 seconds) until there are four horizontal (as shown in photo 6). On 5 , release your hand and wait for 8 seconds, The “RF” indicator will turn on and then automatically light up, frequency lock operation is completed.

Pyle-PDWM811RD-UHF-2-Channel-Wireless-Handheld-Microphone-
fig-9

If the handheld is a toggle switch, just press the frequency conversion button for three seconds to lock the frequency.

Note: To release the locking function, repeat the above operation.

PRECAUTIONS FOR USE

  1. To ensure the receiving performance, avoid placing the host unit on the dead corner.
  2. Do not throw away the handheld microphone to avoid serious damage.
  3. The machine body is not waterproof, please avoid water droplets or rain from entering the machine body.
  4. Keep away from the electromagnetic field, high-voltage transmission networks, and large metal objects as far as possible.
  5. Do not disassemble by yourself. The internal voltage may cause an electric shock to you.
  6. When replacing the battery, be sure to press and hold the power button on the microphone until the screen turns on.
  7. If the microphone is not used for a long time, please take out the battery to prevent battery leakage.
  8. If the receiver is not used for a long time, please unplug the AC power plug.
  9. If the machine falls apart or foreign matters enter the machine, do not continue to use it. Contact the local dealer or recognized service center immediately. Do not disassemble and repair by yourself. There is high voltage in the machine, which may cause you the risk of electric shock.
  10. Keep the power adapter easy to operate. If the power adapter is not used for a long time, please unplug the AC power plug
  11. In order to protect the environment, please put the waste battery into the designated classified trash can or return it to the manufacturer. It can not be discarded directly. Do not put the battery or battery pack in the sun, baking, and other similar overheated environments.
    NOTE: Make sure that the volume control is set to a minimum position before the power is switched on. Loud noise produced at high volume when power is switched on can impair hearing.

BLUETOOTH FUNCTION

  • Bluetooth and handheld input will be synchronized.
  • Wireless BT Version: 4.2
  • Wireless BT Range: 32’ ft

NOTICE: All Pictures shown are for illustration purposes only. Actual products may vary due to product enhancement. The pictures shown are for illustration purposes only.

FEATURES

  • Hassle-Free Wireless Microphone System
  • Multi-Source Audio Signal Mixing Ability
  • Control Audio Levels from External Devices
  • Wireless BT Music Streaming Ability
  • Dual Fixed Frequency System Design
  • Adjustable Rotary Controls: Echo, Tone, Volume: Mic 1, Mic 2
  • Wired Microphone Support (2) 1/4’’ Mic Inputs
  • (2) 1/4’’ Mic Inputs
  • RCA Audio (L/R) Input/Output Jacks
  • Rear Panel 1/4’’ Mixed Output
  • Adjustable Antennas for Extended Wireless Range
  • Includes Handheld Wireless Microphones
  • Rugged Microphone Construction & Steel Mesh Grill
  • Convenient ON/OFF/MUTE Power Switch
  • Battery Operated Mic, Requires (2) ‘AA’ Batteries, Included
  • Ultra-Wide Frequency Range
  • Ideal for speech, Karaoke, DJ Sound & House Party Audio

www.PyleUSA.com
www.PyleUSA.com

WHAT’S IN THE BOX

  • (2) Handheld Microphone
  • (1) 3.5 Double Lotus Conversion Cable, 59.1’-inches
  • (1) 6.35 to XLR Male, 118’-inches
  • (2) Four Corner Ring
  • (4) No. 3 1.5V AA Battery
  • (1)Two Ends of 6.35 through the Machine Line, 39.4’-inches
  • (1) Dual Channel Cable, 59.1’-inches
  • (1) Two-pin (UL) Flat Plug Power Cord

TECHNICAL SPECS

  • UHF Addressable Frequency: 510-590MHz
  • Wireless Operation Range: Up to 165’+ ft.
  • Modulation Mode: FM
  • Maximum Deviation: +/-75KHz
  • Frequency Response: 80-18kHz (+/-3dB)
  • Frequency Stability: 20ppm
  • Audio Dynamic Range: >90dB
  • S/N Ratio: >95dB
  • T.H.D: <0.5%
  • Mirror Image Rejection: >50dB
  • LINE Input Sensitivity: 380mV/-8.5dB
  • MIC Input Sensitivity: 5mV/-46dB
  • LINE Input Impedance: 20 KΩ
  • MIC Input Impedance: 600Ω
  • Receiver Power Supply: 120/240V (18V/500mA Power Adapter)
  • Mic Element: Dynamic
  • Antenna: Built-in Housing
  • RF Output: <10mW
  • Spurious Emission: <-40dB
  • Battery Operated Mic requires: (2) AAA Batteries Each
  • Current Dissipation: <140mA
  • Microphone Dimensions (L x D): 9.65” x 9.45” -inches
  • Base Receiver Dimensions (L xW x H): 11.8” x 3.8” x 1.8” -inches

FAQs

What is the Pyle PDWM811RD UHF 2 Channel Wireless Handheld Microphone?

The Pyle PDWM811RD is a UHF (Ultra High Frequency) 2 Channel Wireless Handheld Microphone system designed for professional audio applications, including live performances, presentations, and more.

How many microphones are included in the PDWM811RD system?

The PDWM811RD system typically includes two wireless handheld microphones, allowing for dual-channel operation and versatile audio capture.

What is the wireless range of the PDWM811RD microphone system?

The PDWM811RD system is designed to provide a reliable wireless range of up to Up to 165'+ feet, ensuring freedom of movement during performances or presentations.

Is the PDWM811RD microphone system suitable for professional use?

Yes, the PDWM811RD microphone system is designed for professional audio applications and is suitable for use by musicians, public speakers, and performers who demand high-quality sound.

How do I set up the PDWM811RD microphone system?

Setting up the PDWM811RD system is typically straightforward. Connect the receiver to your audio equipment, insert batteries into the microphones, and follow the included instructions for synchronization and operation.

What frequencies does the PDWM811RD system operate on?

The PDWM811RD system operates on UHF frequencies, providing reliable and interference-resistant wireless audio transmission.

Can I use both microphones simultaneously with the PDWM811RD system?

Yes, the PDWM811RD system allows for dual-channel operation, enabling you to use both microphones simultaneously without interference.

Are there adjustable controls on the microphones?

Yes, the microphones typically feature adjustable controls, including volume and other audio settings, allowing you to fine-tune your audio output.

Is there a display screen on the microphone or receiver for monitoring settings?

Yes, both the microphones and the receiver often include display screens that provide essential information about settings and audio levels.

What type of audio outputs are available on the PDWM811RD receiver?

The PDWM811RD receiver typically includes various audio outputs, such as balanced XLR and unbalanced 1/4-inch outputs, providing flexibility for connecting to different audio equipment.

Does the PDWM811RD system include any special features for audio enhancement?

Yes, the PDWM811RD system often includes features like adjustable EQ settings, audio compression, and noise reduction to enhance the quality of your audio output.

Is there a warranty provided with the Pyle PDWM811RD UHF 2 Channel Wireless Handheld Microphone system?

The PDWM811RD system often comes with a 1 year limited warranty.For more details please contact its official website.

Where can I find additional support and product information for the PDWM811RD system?

For additional support, product information, and user manuals, you can visit the contact their customer support at https://pyleusa.com/pages/contacts.

Download this PDF Link: Pyle PDWM811RD UHF 2 Channel Wireless Handheld Microphone User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals