Verifone V400m Plus 4G Wireless Credit Card Reader Instructions

Verifone V400m Plus 4G Wireless Credit Card Reader Instructions

Electrical

Separate Power Sources

Before you connect the terminal power pack to an electrical outlet, check that the on/off power switch on the terminal is off. If the terminal does not have an on/off switch, check that the power cable connector is removed from the terminal’s power port. Or, when connecting the terminal to a power pack, always connect the plug of the power pack to an electrical wall outlet first. Then connect the power cable to the terminal’s power port.
The reference input power ratings are as follows:

• Input Voltage: 100-240V AC, 50/60Hz
• Output Voltage: 5V DC, 2.2A

Model V400m Plus 4G/V400m Plus 4G WW and V400m-2 is intended to be provided with a Listed Power Supply module having an output rating of 5V DC, minimum 2.2A, Tma 40°C, Class II and evaluat Power Source or PS2 or equivalent.

Location – Electrical Considerations

CAUTION: Due to the risk of electric shock or damage to the terminal, do not use this equipment near a water source, for example near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Likewise, avoid using this product during thunderstorms causing power cuts. Avoid placing the terminal near electrical devices or other units that could cause large voltage fluctuations or electrical interference, such as air conditioners, neon signs, high frequency safety devices or electrical equipment.

AC Adapter

The AC adapter is designed to ensure your personal safety and to be compatible with this equipment. Please follow these guidelines:

• Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet.
• Allow adequate ventilation around the adapter. Avoid locations with restricted airflow.
• Connect the adapter to a proper power source. The voltage and grounding requirements are found on the product case and/or packaging.
• Do not use the adapter if the cord is damaged.
• Do not attempt to service the adapter. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.

Disconnecting Power

Disconnecting power during a transaction may cause transaction data files that are not yet stored in the terminal memory to be lost.

Equipment

Location – Environmental Considerations

Do not plug the power pack into an outdoor outlet. The terminal is not waterproof. Any damage to the unit from exposure to water or dust may void your warranty. Do not use the device where there is high heat, dust, humidity, moisture, or caustic chemicals or oils. Keep the device away from direct sunlight and anything that radiates heat, such as a stove or a motor.

WARNING! Your device contains sensitive electronic components that can be permanently damaged if exposed to excessive shock or vibration. To minimize the risk of damage to your device, avoid dropping your device and operating it in high-shock and high-vibration environments. Do not store the device where prolonged exposure to extreme temperature can occur, because it can cause permanent damage. Do not expose the device to water. Contact with water can cause this unit to malfunction

Repairs

Do not, under any circumstances, attempt any service, adjustments, or repairs on this equipment. Instead, contact your local Verifone distributor or service provider for assistance. Failure to comply may void the product warranty

Battery Pack/Coin Cell Instructions for Portable Products

Dispose of the battery pack/coin cell in accordance with all national, state, and local laws and regulations as regionally required. Some batteries may be recycled and may be accepted for disposal at local recycling centers

CAUTION: There is risk of explosion if the battery is replaced by an incorrect type.

• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

The highest specified charging temperature of battery pack is 50+/-3°C.
The lowest specified charging temperature of battery pack is 0+/-3°C.

Notice for WLAN

For CE WLAN: 5150-5350 MHz
This device is restricted for indoor usage in all the member states when operating in the 5150 to 5350 MHz frequency range.

This equipment may be operated in:

AT| BE| BG| HR| CY| CZ| DK| EE| FI
FR| DE| EL| HU| IE| IT| LV| LT| LU
MT| NL| PL| PT| RO| SK| SI| ES| SE
UK(NI)| IS| LI| NO| CH| TR| | |

For UK WLAN: 5150-5350 MHz
This device is restricted for indoor usage in the UK when operating in the 5150 to 5350 MHz frequency range.

For ISED:

1. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
2. Where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.

FCC/ISED Compliance

The following device has been tested and certified as compliant with the regulations and guidelines detailed below:
Manufacturer: VeriFone, Inc.
Brand: Verifone
Model: V400m Plus 4G,V400m Plus 4G WW and V400m-2

Part 15 of FCC and ISED Rules

This device complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules and Innovation, Science and Economic Development Canada license-exempt RSS standard(s) which provides reasonable protection against harmful interference in a residential area. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment generates and uses radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

In the unlikely event that there is interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult with the dealer or ask an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC Rules.

Any changes or modifications to this equipment not expressly approved by Verifone could void the user’s authority to operate this equipment.

NOTE: The country code selection is for non-US models only and is not available to all US models. Per FCC regulations, all Wi-Fi product market in US must be fixed to US operation channels only.

This Class B digital apparatus complies with CAN ICES-003 (B).

RF Exposure

USA
The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. The SAR limit set by the FCC is 1.6W/ kg for body worn SAR and 4W/kg for extremity SAR.This device complies with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2013.

CE
This device complies with the Radio Equipment Directive (2014/53/EU) issued by the Commission of the European Community. A minimum separation distance of 0 mm must be maintained between the device and user’s extremity during extremity operation to comply with the RF exposure requirements in Europe. To compliance with RF Exposure requirements in Europe, third-party belt-clips, holsters or similar accessories used by this device should not contain any metallic components. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided.

UK
This device complies with the Radio Equipment Regulations 2017 SI 2017/1206 issued by the British Standards Institution. A minimum separation distance of 0 mm must be maintained between the device and user’s extremity during extremity operation comply with the RF exposure requirements in UK. To compliance with RF Exposure requirements in UK, third-party belt-clips, holsters or similar accessories used by this device should not contain any metallic components. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided.

ISED
The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Brazil Warning Statement

Notice for Operating Frequency and Output Power

Operating Temperature

The product is designed to work at maximum ambient temperature 0°C and 40°C.

Damage

Carefully inspect the shipping carton and its contents for any damage. If the unit or any product component appears damaged or to have been tampered with, immediately notify the shipping company and your Verifone distributor or service provider. Do not use a V400m unit that has been tampered.

Cleaners and Solvents

Never use thinner, trichloroethylene or ketone-based solvents to clean the V400m device, these may deteriorate plastic or rubber parts. Do not spray cleaners or other solutions directly onto the keypad or display. For best results, use a clean cloth dampened with water and mild soap. To remove stubborn stains, use alcohol or an alcohol-based cleaner.

Recycling: DO NOT DISCARD!
UNIT MUST BE RECYCLED OR DISPOSED OF PROPERLY.
For proper disposal instructions go to http://recycle.verifone.com/

Please retain this sheet for future reference. continued on rear cover

References

• Social Responsibility - Planet | Verifone
• Verifone | The Payments Architects Who Truly Understand Commerce

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>